Influence of support properties on the sound radiated from the vibrations of rectangular plates

The control of the forced vibration response of structures through the optimal tuning of its supports is desirable in many applications. Tuning may enhance the dissipation of vibration energy within the supports, thereby reducing fatigue and structure-borne noise. Two different models were developed to calculate the optimal support stiffness that minimizes the velocity response of homogeneous plates. The first model, based on the wave propagation at the edge, yields a good first cut approximation of the optimal properties. The optimal viscous and viscoelastic support stiffness for minimal reflection at the edge was calculated. Maximum absorption of the incident waves occurs when the viscous support stiffness matches the characteristic mechanical impedances of the plate. The second model, based on the Rayleigh-Ritz method, yields more accurate estimates of the optimal support stiffness required to minimize the forced velocity response of the finite rectangular plate. The optimal support properties calculated from the two different methods were in good agreement. This suggested that the modal response of the plate is strongly influenced by the wave reflections at the edges. Finally, the effects of support properties on the sound radiated from the plate were investigated. The optimal support stiffness that minimizes the radiated sound power was found to be smaller than the value that minimizes the velocity response. The results show that both the velocity response and sound radiation are strongly influenced by dissipation of vibration energy at the edges, and demonstrate that support tuning can yield significant noise and vibration reduction.     

On some contact problems for composite half-spaces PMM vol. 31, no. 6, 1967, pp. 1001–1008

Solutions are presented herein of some contact problems connected with the torsion of a composite half-space. In the general case the problem of the torsion of a composite elastic half-space is examined by means of the rotation of a stiff finite cylinder welded into a vertical recess of this half-space. Moreover, the following particular problems on the torsion of such a half-space are considered.

1. 1) A composite half-space with a vertical elastic infinite core, twisted by means of the rotation of a stiff stamp affixed to the upper endplate of the elastic core.

2. 2) A half-space with a vertical cylindrical infinite hole, twisted by means of the rotation of a stiff finite cylinder welded into the upper part of this hole.

In the general case the solution of the problem reduces to the solution of an integral equation of the second kind on a half-line. The question of the solvability of this fundamental integral equation is investigated, and it is shown that its solution may be constructed by successive approximations.

Let us note that the problem of the torsion of a homogeneous half space and of an elastic layer by means of rotation of a stiff stamp has been considered by Rostovtsev [1], Reissner and Sagoci [2], Ufliand [3], Florence [4], Grilitskii [5] and others.

The problem of the torsion of a circular cylindrical rod and the half-space welded to it which are subject to a torque applied to the free endface of the rod has been considered by Grilitskii and Kizyma[6].

The torsion of an elastic half-space with a vertical cylindrical inclusion of some other material by the rotation of a stiff stamp on the surface of this half-space has been considered in [7], wherein it has been assumed that the stamp is symmetrically disposed relative to the axis of the inclusion and lies simultaneously on both materials.     

Crystal Structures of Hydrochlorides of 2,3-Pentamethylene-3, 4-dihydroquinazolin-4-one

The crystal structures of hydrate (1) and anhydrate (2) forms of 2,3-pentamethylene-3,4-dihydroquinazolin-4-one hydrochloride have been determined by X-ray structure analysis. Crystal data of 1 are 2(C₁₃H₁₄N₂O)*3(HCl)*4.5 (H₂O), triclinic P?1, Z=2, a=8.004(5), b=13.129(7), c=15.725(7) Å, α=106.45(4), β=92.61(4), γ=97.98(5), R=0.0652 and 2 are C₁₃H₁₄N₂O*HCl, monoclinic C2/c, Z=8, a=21.360(4), b=5.954(1), c=21.263(4), β=117.89(3), R=0.0556. The crystal of the hydrate form 1is unstable. This form collapses easily with evaporation of H₂O and part of HCl molecules from crystals. By recrystallizing destroyed form has been obtained stable crystal form 2.     

Effect of the External Mirror Feedback Strength in the Dynamics and Spectrum of the Injected Semiconductor Lasers

We analytically investigate the effect of an external mirror on the stability of an injected semiconductor laser, the latter treated as injected damped oscillators. In the studied configuration, the injected semiconductor laser with an external mirror is under the influence of a chaotic oscillating optical signal that is generated by a similar semiconductor master laser. We derive our results in terms of the damping rate and resonance frequency. We show that the external mirror can eliminate the unstable modes of the injected laser at low frequencies. Furthermore, the mirror can enhance the damping of the oscillation modes of the injected semiconductor laser; consequently, the driven response of the injected laser may have a broad spectrum, even wider than that of the chaotic driving signal. We also show results for the bandwidths of the injection amplitude and phase increment as functions of the injection rate and feedback strength of the external mirror. In addition, we use bifurcation and time-series curves to describe the dynamical behavior of the injected laser. We identify the feedback strength of injected laser, relative to that of the master laser, which induces synchronization between the injected-laser oscillation modes and the master laser.     

ChipCheck--a program predicting total hybridization equilibria for DNA binding to small oligonucleotide microarrays

Presented here is the program ChipCheck that allows the computation of total hybridization equilibria for hybridization experiments involving small oligonucleotide arrays. The calculation requires the free energies of binding for all pairs of probes and targets as well as total strand concentrations and probe molecule numbers. ChipCheck has been tested computationally on microarrays with up to 100 spots and 42 target strands (4200 binding equilibria). It arrives at solutions through iterations employing the multidimensional Newton method. While currently running in simulation mode only, an extension of the approach to the exhaustive analysis of chip results is being outlined and may be implemented in the future. The output displays the extent of correct and cross hybridization both graphically and numerically. In principle, calculating total hybridization equilibria allows for eliminating noise from DNA chip results and thus an improvement in sensitivity and accuracy.     

Über die katalytische Spaltung von Azetalen an Aluminiumoxyd II

Ohne Zusammenfassung     

Studien über Chinhydrone

Ohne ZusammenfassungZum Schlüsse erlaube ich mir, meinem hochverehrten Lehrer Herrn Prof. Dr. W. Suida für seine Anregungen, sowie mir gütigst gewährte Unterstützungen bestens zu danken.     

Über Methylaminoterephtalsäuren und andere Terephtalsäureabkömmlinge

Ohne ZusammenfassungFür die Ausführung der im vorstehenden mitgeteilten Krystallmessungen gestatten wir uns, Herrn Hofrat v. Lang unseren besten Dank zu sagen.