Preparation and characterization of modified 3-aminopropylsilyl silica phases with 1,8-naphthalic anhydrides in HPLC

Modified 3-aminopropylsilyl silica stationary phases with 1,8-naphthalic anhydrides [3-(1,8-naphthalimido)propyl (NAIP), 3-(4-amino-1,8-naphthalimido)propyl (4A-NAIP), 3-(3-nitro-1,8-naphthalimido)propyl (3N-NAIP), and 3-(4-nitro-1,8-naphthalimido)propyl modified silyl silica gel (4N-NAIP)] are prepared in a single reaction. Chromatographic properties of these phases are characterized using various solutes including monosubstituted benzenes, alkyl benzenes, and polycyclic aromatic hydrocarbons (PAHs) in high-performance liquid chromatography. Even though the retention in these NAIPs is mainly based on the reversed-phase mode, 3N- and 4N-NAIP show a remarkable recognition toward aromatic hydrocarbons, which is attributed to their strong pi-pi interaction. Furthermore, the recognition ability is according to the molecular planarity and non-linearity of PAHs. Subsequently, 3N- and 4N-NAIP has a distinct selectivity from octadecyl silica and, therefore, will be a valuable alternative for a separation or a solid-phase extraction of aromatic compounds.     

Preparation of polymers with substituted allyl end group using dimer of α-methylvinyl monomer as addition fragmentation chain transfer agent at high temperatures

The dimerization of methyl methacrylate, ethyl methacrylate, methacrylonitrile, and α-methylstyrene to 2-substituted-1-allylic compounds [CH₂?C(X)CH₂C(CH₃)₂X] (X = COOR, C₆H₅, or CN), and methyl α-ethylacrylate to a 3-substituted-2-allylic compound [CH₃CH?C(COOCH₃)CH₂C(CH₃)(C₂H₅) COOCH₃] was carried out by catalytic chain transfer using benzylbis (dimethylglyoximato) (pyridine) cobalt (III). These dimers were then used as addition-fragmentation chain transfer agents in the polymerizations of methyl methacrylate and styrene at 80⁰C or above. Cross-dimers from methacrylic ester-α-methylstyrene and methacrylonitrile-α-methylstyrene mixtures were similarly prepared. Except for those from methyl α-ethylacrylate and methacrylonitrile, all the dimers participated in the addition-fragmentation and the copolymerization to different extents. The dimer of methyl α-ethylacrylate was actually inactive during the styrene and methyl methacrylate polymerizations. The methacrylonitrile dimer was primarily incorporated in the polymer chain through copolymerization. Among the dimer and the cross-dimers from α-methylstyrene with the other monomers, those bearing the α-methylstyrene moiety in the α-substituent [CH₂?C(X)CH₂C(CH₃)₂C₆H₅, X?COOCH₃, COOC₂H₅, and CN] are noted as highly reactive chain transfer agents. © 1994 John Wiley & Sons, Inc.     

Characterization of amorphous hydrogenated carbon formed by low-pressure inductively coupled plasma enhanced chemical vapor deposition using multiple low-inductance antenna units

Three-dimensional plasma enhanced chemical vapor deposition (CVD) of hydrogenated amorphous carbon (a-C:H) has been demonstrated using a new type high-density volumetric plasma source with multiple low-inductance antenna system. The plasma density in the volume of phi 200 mm x 100 mm is 5.1 x 10(10) cm(-3) within +/-5% in the lateral directions and 5.2 x 10(10)cm(-3) within +/-10% in the axial direction for argon plasma under the pressure of 0.1 Pa and the total power as low as 400 W. The uniformity of the thickness and refractive index is within +/-3.5% and +/-1%, respectively, for the a-C:H films deposited on the substrates placed on the six side walls, the top of the phi 60 mm x 80 mm hexagonal substrate holder in the pure toluene plasma under the pressure is as low as 0.04 Pa, and the total power is as low as 300 W. It is also found that precisely controlled ion bombardment by pulse biasing led to the explicit observation in Raman and IR spectra of the transition from polymer-like structure to diamond-like structure accompanied by dehydrogenation due to ion bombardment. Moreover, it is also concluded that the pulse biasing technique is effective for stress reduction without a significant degradation of hardness. The stress of 0.6 GPa and the hardness of 15 GPa have been obtained for 2.0 microm thick films deposited with the optimized deposition conditions. The films are durable for the tribology test with a high load of 20 N up to more than 20,000 cycles, showing the specific wear rate and the friction coefficient were 1.2 x 10(-7) mm3/Nm and 0.04, respectively.     

Dual mechanisms for the fragmentation of 1-benzoylbenzotriazole upon electron impact

The electron impact induced fragmentation of 1-benzoylbenzotriazole has been studied by ¹³C labelling experiments. It has been found that the loss of CO from the [M ? N₂]⁺˙ ions proceeds by two routes; about 78% of the ions decompose via the molecular ions of the corresponding thermal fragmentation product, 2-phenylbenzoxazole, and 22% via those of the corresponding photochemical fragmentation product, 6-phenanthridone.     

Direct observation of chiral susceptibility in the canonical spin glass AuFe

The extraordinary Hall resistivity rho(xy) and the magnetization M of a canonical spin glass AuFe (8 at.% Fe) were measured simultaneously as functions of temperature with the best care to the thermal and the magnetic field hysteresis. The data of rho(xy) show an anomaly at the spin glass transition temperature T(g) and have different zero field cooling (ZFC) and field cooling (FC) measurements below T(g). Moreover, the value of rho(xy)/M, which represents the chiral susceptibility of the system in the present case, also shows the difference between ZFC and FC measurements. The results are consistent with the predictions of the chirality scenario of canonical spin glasses by Kawamura.     

Direct mono-phosphorylation of 1,3-diols. A synthesis of FTY720-phosphate

A novel method for selective and direct phosphorylation of various 1,3-diols using silver(I) oxide, tetrabenzyl pyrophosphate (TBPP), and tetrahexylammonium iodide affording mono-phosphates was developed. We applied the present method to the synthesis of FTY720-phosphate.     

Flatness of differentiable functions along a subset of a real analytic set

The vanishing order of the value of a smooth function at a point along a subset is related to the order of its Taylor expansion there. To compare these vanishing orders the Spallek function is introduced. A number of properties of this function are developed.     

Rate constants for aqueous‐phase reactions of SO4− with C2F5C(O)O− and C3F7C(O)O− at 298 K

Perfluorocarboxylic acids and their anions (PFCAs), such as perfluorooctanate (C₇F₁₅C(O)O^?), have been generally recognized to be global pollutants and are believed to persist in the environment. Kinetic data for reactions of sulfate anion radicals (SO₄^?) with PFCAs are needed to evaluate the residence times of PFCAs in the environment, but no kinetic data have been reported, except for the rate constant for the reaction of SO₄^? with trifluoroacetate (CF₃C(O)O^?) (k₁). In this study, using the fact that PFCAs react with SO₄^? to form shorter chain PFCAs, we determined rates relative to k₁ of the reactions of photolytically generated SO₄^? with two short‐chain PFCAs, pentafluoropropionate (C₂F₅C(O)O^?; k₂) and heptafluorobutyrate (C₃F₇C(O)O^?; k₃), along with conversion ratios for conversion of C₂F₅C(O)O^? into CF₃C(O)O^? (α) and conversion of C₃F₇C(O)O^? into C₂F₅C(O)O^? (β) and CF₃C(O)O^? (γ) at 298 K. Values of k₁, k₂, or k₃ might change over the course of reaction with increasing ionic strength. Nevertheless, if the values of k₁/k₂, k₂/k₃, α, β, and γ remain almost constant during the reaction, a simple equation involving relative rates, such as k₁/k₂, can be used to relate the concentrations of C₃F₇C(O)O^?, C₂F₅C(O)O^?, and CF₃C(O)O^?. We compared the relative rates, such as k₁/k₂, and the conversion ratios determined from various experimental runs with different initial conditions to check whether relative rates and conversion ratios remained almost constant during each experimental run. The values of k₁/k₂, k₂/k₃, α, β, and γ seemed to remain almost constant, which facilitated determination of k₂/k₁ = 0.89 ± 0.07, k₃/k₁ = 0.84 ± 0.08, α = 0.88 ± 0.05, β = 0.75 ± 0.05, and γ = 0.17 ± 0.02. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 276–288, 2007