固相萃取-气相色谱-质谱法测定皮革制品中短链氯化石蜡

短链氯化石蜡（SCCPs）是我国皮革加脂过程中常用的添加剂,但近年已被欧盟等列为禁止使用的持久性有机污染物。由于SCCPs结构复杂,且皮革基质干扰严重,目前尚没有完善的皮革制品中SCCPs的标准检测方法。本文采用硅胶为固相萃取柱萃取,以正己烷-二氯甲烷（2:1,v/v）为洗脱剂,使SCCPs与皮革基质中的干扰组分完全分离,建立了用于测定皮革制品中SCCPs的固相萃取-气相色谱-质谱方法。该方法的回收率为90.47%~99.00%,检出限为0.069~0.110 mg/kg,相对标准偏差（RSD）为4.20%~6.69%。该方法适用于皮革中SCCPs的定性、定量分析。     

Kinetics of hydrogen peroxide decomposition catalyzed by Cu-buserite over a well-sealed and thermostated kinetics assembly

Herein a well-sealed and thermostated kinetics assembly is designed and built, which can run stirred at different reaction temperatures. With the reaction assembly above and the volumetric method together, the hydrogen peroxide (H₂O₂) decomposition reaction kinetics is systematically investigated under a variety of reaction conditions over a copper-doped buserite-type layer manganese oxide (referred to as Cu-buserite) as a heterogeneous catalyst. The overall second-order rate law is fitted out by the linear regression analysis, with the reaction orders with respect to both H₂O₂ and Cu-buserite determined to each be equal to 1, and then explicitly explained by the proposed Michaelis-Menten like mechanism. The apparent activation energy E_a is estimated as 33.5 ± 2.5 kJ mol⁻¹.     

Synthesis and characterization of nanostructured Li2MnO3 from nanostructured MnOOH precursors

Li₂MnO₃ with different nanostructures was synthesized through a solid-state reaction. MnOOH nanorods and nanowires prepared via the hydrothermal method were used as precursors, respectively, to react with Li(OH)·H₂O to prepare nanostructured Li₂MnO₃ in the temperature range from 500 to 800 °C. The samples were characterized by XRD, TEM, ESR and FTIR results. Based on the experimental results, the dehydration-oxidation-combination (DOC) formation mechanism of Li₂MnO₃ was proposed.     

酚醛树脂/蒙脱土纳米复合材料的制备及固化反应动力学研究

利用自制的有机蒙脱土 ,采用浇模固化成型法制备酚醛树脂 /六次甲基四胺 /蒙脱土纳米复合材料 ,并用XRD观察有机蒙脱土分别在热塑性和热固性酚醛树脂中复合行为 .研究发现 ,由于两种树脂的固化反应机理不同 ,热固性酚醛树脂与蒙脱土复合 ,可得插层型纳米复合材料 ;而采用热塑性酚醛树脂进行固化 ,则得到部分剥离的纳米复合材料 .通过DSC进一步研究热塑性酚醛树脂 /蒙脱土复合体系的固化反应动力学 .运用Kissinger ,Flynn Wall Ozawa ,Crane方法求出活化能和反应级数等动力学参数 .结果发现 ,加入蒙脱土使固化反应活化能下降 ,反应级数减小 ,从而有利于固化工艺的实现 ,便于纳米复合材料实际应用 .     

纳米Ce0.5Zr0.5O2单相固溶体的软化学合成

以无机盐为原料,利用高分子网络凝胶法在常压(101．325kPa)和较低温度(550℃)条件下合成出Ce0.5Zr0.5O2超细粉,并用XRD粉末衍射、TEM透射电镜和FT-IR红外光谱对所得产物的晶相和微观形貌进行表征。结果表明,所得超细粉体为单一立方相固溶体且结晶良好,粉体平均粒径约为9．5nm,无明显硬团聚。     

The Roles of Various Plasma Active Species in Toluene Degradation by Non-thermal Plasma and Plasma Catalysis

Plasma Chemistry and Plasma Processing - Investigating the roles of plasma active species in plasma chemical reaction process can improve understanding of the mechanism of volatile organic...     

Studies on the transition behavior of physical adsorption from the sub- to the supercritical region: experiments on silica gel

Adsorption equilibria of nitrogen and methane on a mesoporous silica gel were measured over a temperature range from the sub- to the supercritical region. Determination of the compressibility factor shows a significant effect on the experimentally measured isotherms under conditions rho(g)/rho(c)>0.3. The transition of adsorption mechanisms in passing over the critical temperature was proven by the transformation of isotherms from type II to type I. The characteristic feature of subcritical adsorption was still observed at a temperature 8 K higher than the critical and the critical depletion phenomenon was clearly shown on such an isotherm. The limit quantities defined in different ways for the supercritical adsorption are in reasonable agreement, indicating the existence of an upper limit state of the supercritical adsorbate.     

A Study on the Adsorption Isotherms in the Vicinity of the Critical Temperature

Adsorption data of nitrogen and methane on micro-porous activated carbon and on meso-porous silica gel were measured near the critical temperature. It was found that the values of the compressibility factor (z) exerted a significant effect on the behavior of isotherms. Selection of reliable z-values is very important for the analysis of experimental results obtained near the critical temperature. The isotherms on activated carbon always show type-I features at sub- and supercritical temperatures, but those on silica gel remarkably show a change from type-II at sub-critical temperatures to type-I at supercritical temperatures. The critical temperature appears to be shifted up in some case.     

Adsorption of Nitrogen on Silica Gel Over a Large Range of Temperatures

To study the mechanism of physical adsorption of supercritical gases, the adsorption equilibria of N₂ on silica gel for 103–298 K using 20 K increments and pressures up to 10 MPa were measured. A transition of the adsorption mechanism was proven on crossing the critical temperature, but the transition way observed is different from that observed with activated carbon. This causes a difference in the locations of the linear section of the n- _g isotherm at the near-critical temperature. Although the isotherm type is different on silica gel and on activated carbon in the sub-critical region, all isotherms in the supercritical region can be well modeled by a single model. It leads to the argument that the adsorption mechanism of supercritical gases is identical no matter what kind of adsorbent is used.