Determination of gold in ore by flame atomic absorption spectrometry with flow-injection on-line sorbent extraction preconcentration

Gold in ores was determined by flame atomic absorption spectrometry following on-line preconcentration by sorbent extraction in a flow-injection system. The medium polarity adsorption resin Amberlite XAD-8 packed in a 220-μl micro-column was used to collect gold(III) from hydrochloric acid sample solutions for 40 s at 7.6 ml/min. Ethanol was used to elute the adsorbed analytes into the nebulizer. Optimization studies were made on sample loading rate, elution rate and sample acidity. Some possible interferences on the determination are discussed. A 35-fold enrichment was achieved at a sampling frequency of 60 h^?1 and with an RSD of 1.4%. The detection limit (3σ) and 2 μg l^?1. Results for gold in ore samples showed good agreement with those obtained using activated carbon adsorption preconcentration. The recoveries were 97–108%.     

Peculiar features of application of pH gradients formed in borate buffer with a polyhydroxy compound for separation of proteins in a free-flow electrophoretic apparatus

The use of pH gradients in borate buffer with a polyhydroxy compound for separation of proteins in a free-flow electrophoretic apparatus is outlined. The composition of the pH gradients, the free-flow apparatus design and its operation, and the main causes of failures in the protein separation are considered.     

芯片式流通池顺序注射可更新表面反射光谱法用于酶反应检测

将芯片式流通池顺序注射可更新表面反射光谱法用于酶反应检测。HRP催化H2O2氧化BPR底物的反应用于对H2O2的检测。此反应体系与葡萄糖氧化酶联用，用于对血清中葡萄糖的检测。     

Flame atomic absorption spectrometric determination of cadmium and copper in biological reference materials using on-line sorbent extraction preconcentration

Summary Cadmium and copper at the g/g to ng/g level in plant and animal tissue reference materials, and at the g/l level in urine were determined by flame atomic absorption spectrometry using on-line sorbent extraction preconcentration based on flow injection techniques. Bonded silica reversed phase sorbent with octadecyl functional groups (RP-C 18), packed in a 100 l column, was used to collect the diethylammonium-N,N-diethyldithiocarbamate (DDTC) complex formed on-line in the sample digests at low pH. Methanol was used to elute the analyte chelates directly into the nebulizer-burner system of the spectrometer. Small air segments introduced before and after elution prevented the eluent from mixing with the sample solution and increased the sensitivity. A sampling frequency of 85/h could be obtained with a sample loading time of 30 s at a flow rate of 4.0 ml/min. The enrichment factor for both elements was 20 and the enhancement factors, including the effect of the organic solvent and with the flow spoiler removed, were 126 and 114 for cadmium and copper, respectively. The detection limits (3) were 0.15 g/l for cadmium and 0.2 g/l for copper. The precision was 2.3% and 1.4% r.s.d. for 10 g/l Cd and 45 g/l Cu, respectively (n=11). Results for the determination of cadmium and copper in various biological reference materials were typically in good agreement with certified values. Low recoveries were observed, however, for cadmium in samples containing high levels of copper and/or iron, such as bovine liver.On leave from Flow Injection Analysis Research Center, Institute of Applied Ecology, Academia Sinica, Shenyang, China     

The determination of trace amounts of heavy metals in waters by a flow-injection system including ion-exchange preconcentration and flame atomic absorption spectrometric detection

The flow-injection system combines on-line ion-exchange preconcentration with atomic absorption spectrometry (a.a.s.) for the determination of traces (μg l^?1) of heavy metals in water samples. Miniature columns packed with 60–100 mesh chelating resin (122) with a salicylic acid functional group are used for preconcentration. A multifunctional rotary sampling valve which incorporated two parallel sampling columns allows sampling, exchange, elution and a.a.s. to be achieved sequentially. The increases in sensitivity for nickel, copper, lead and cadmium were 20–28-fold at a sampling rate of 40 h^?1 with 5-ml samples. Relative standard deviations were 1.5–4.1%. The recoveries of these four metals added to tap, sea and polluted waters were generally satisfactory, except for cadmium in polluted water. The effects of column diameter and elution flow rates on sensitivity are discussed. Possible interferences are described.     

Oligomerization and Polymerization of Ethylene Initiated by a Novel Ni(Ⅱ)-Based Acetyliminopyridine Complexes as Single-Site Catalysts

Novel Ni(Ⅱ)-based acetyliminopyridine complexes 1b, 2b, 3b (1-3b), which are synthesized from ligands 1a, 2a, 3a (1-3a) and [NiCl2(DME)], are suitable precursors for the catalysts that are necessary for ethylene oligomerization and polymerization reactions, activated by methylaluminoxane (MAO). The MAO-treated 1-3b presents an active catalytic center, which may oligomerize and polymerize ethylene to produce linearα-olefins and polyethylene, respectively. The molecular weight distributions of oligomers that are obtained are in good agreement with the Schulz-Flory rules for oligomers>C4. The activity of 3b-MAO complex is 6.3×107 g/(molNi·h) at 50℃. The activities and molecular weight distributions of oligomers show significant reliance on the structures of catalyst precursors.     

Rheological Properties of Model and Crude Oil Systems when Wax Precipitate under Quiescent and Flowing Conditions

Wax precipitation and deposition is a recurring challenge in transportation of crude oil, and increased knowledge about the behavior of such systems is necessary. Microscopy and differential scanning calorimetry were used to follow the crystallisation of wax for two model systems. The amount of solid was also determined by the latter method as well. The flow and viscoelastic behavior were investigated around the wax precipitation temperature, and the yield stress was determined both after dynamic and static cooling. Interpretation of the results was carried out in view of crystal growth and microstructure of the wax crystals. The variables that were studied were wax composition, amount of wax and thermal and shear history.     

Inhibitor Development against p7 Channel in Hepatitis C Virus

Hepatitis C Virus (HCV) is the key cause of chronic and severe liver diseases. The recent direct-acting antiviral agents have shown the clinical success on HCV-related diseases, but the rapid HCV mutations of the virus highlight the sustaining necessity to develop new drugs. p7, the viroporin protein from HCV, has been sought after as a potential anti-HCV drug target. Several classes of compounds, such as amantadine and rimantadine have been testified for p7 inhibition. However, the efficacies of these compounds are not high. Here, we screened some novel p7 inhibitors with amantadine scaffold for the inhibitor development. The dissociation constant (Kd) of 42 ARD-series compounds were determined by nuclear magnetic resonance (NMR) titrations. The efficacies of the two best inhibitors, ARD87 and ARD112, were further confirmed using viral production assay. The binding mode analysis and binding stability for the strongest inhibitor were deciphered by molecular dynamics (MD) simulation. These ARD-series compounds together with 49 previously published compounds were further analyzed by molecular docking. Key pharmacophores were identified among the structure-similar compounds. Our studies suggest that different functional groups are highly correlated with the efficacy for inhibiting p7 of HCV, in which hydrophobic interactions are the dominant forces for the inhibition potency. Our findings provide guiding principles for designing higher affinity inhibitors of p7 as potential anti-HCV drug candidates.     

高效液相色谱-二极管阵列检测法测定小麦粉及面粉改良剂中福美双

福美双是重要的二硫代氨基甲酸酯(DTC)杀菌剂,在小麦中使用限量以1 mg/kg二硫化碳(CS₂)计。目前我国相关检测方法是针对二硫代氨基甲酸酯一类的化合物,二硫代氨基甲酸酯通过与酸反应生成CS₂,采用光谱法或色谱法测定CS₂,间接实现二硫代氨基甲酸酯测定。该方法无法特异性实现对福美双的检测,因此开展小麦粉中福美双检测方法的研究具有重要意义。研究建立了高效液相色谱-二极管阵列检测(HPLC-DAD)测定小麦粉及面粉改良剂中福美双的分析方法。小麦粉及面粉改良剂样品用乙腈溶剂提取后,经涡旋、振荡、冰水浴超声和静置后取上清液过滤,供高效液相色谱测定。采用ZORBAX plus-C18色谱柱(150 mm×4.6 mm, 5 μm)分离,以水-乙腈为流动相洗脱分析,在波长280 nm下检测。实验优化了提取溶剂及其体积、振荡超声条件、色谱柱、检测波长、流动相等条件。该方法采用保留时间和紫外光谱图定性,外标法定量。该方法在线性范围内(0.30~30.0 μg/mL)线性关系良好,相关系数(r²)为0.99999。对小麦粉及面粉改良剂进行1.5、3.0、15 mg/kg 3个水平的加标回收试验,福美双的回收率为89.6%~98.3%,相对标准偏差为1.6%~3.9%(n=6)。方法的检出限和定量限分别为0.5 mg/kg和1.5 mg/kg。该方法采用溶剂提取,操作简单,分析时间短,特异性好,具有精密度高、重复性好、检出限低等特点,适用于小麦粉及面粉改良剂中福美双快速、准确的定量检测。     

液相色谱-电喷雾串联四极杆质谱法测定鸡肉中17种磺胺类药物的残留

建立了鸡肉中17种磺胺类药物残留量的液相色谱-电喷雾串联四极杆质谱测定方法。以稳定同位素13C6-磺胺二甲基嘧啶作为内标,采用多反应监测定量。样品经过匀浆、乙腈提取、正己烷脱脂、硅胶柱净化后进行液相色谱-质谱分析。采用Capcell Pak C8DD色谱柱,以均含0.2%甲酸的水和甲醇为流动相进行梯度洗脱。方法检出限为0.02~1 μg/kg,17种磺胺类药物的加标回收率为52.3%~124.9%（添加水平为1,5,10　μg/kg),相对标准偏差为1.0%~17.6%。