Hydrophilic modification of poly(vinylidene fluoride) (PVDF) by in situ polymerization of methyl methacrylate (MMA) monomer

The hydrophilicity of poly(vinylidene fluoride) (PVDF) was first improved by in situ polymerization of polar monomer in PVDF solution. Methyl methacrylate was adopted as the reaction monomer, and the polymerization occurred in a solution of PVDF in N,N-dimethylformamide. PVDF/poly(methyl methacrylate) (PMMA) blend was obtained after in situ polymerization. The relative hydrophilicity of the in situ blend was characterized by contact angle measurement. At the same time, the hydrophilicity of the PVDF/PMMA blends prepared by solution blending was compared with that of the in situ blend. The contact angle measurements indicated that in situ polymerization has a stronger modifying effect on the hydrophilicity of PVDF than solution blending.     

Characterization of the two-component, FAD-dependent monooxygenase SgcC that requires carrier protein-tethered substrates for the biosynthesis of the enediyne antitumor antibiotic C-1027

C-1027 is a potent antitumor antibiotic composed of an apoprotein (CagA) and a reactive enediyne chromophore. The chromophore has four distinct chemical moieties, including an ( S)-3-chloro-5-hydroxy-beta-tyrosine moiety, the biosynthesis of which from l-alpha-tyrosine requires five proteins: SgcC, SgcC1, SgcC2, SgcC3, and SgcC4; a sixth protein, SgcC5, catalyzes the incorporation of this beta-amino acid moiety into C-1027. Biochemical characterization of SgcC has now revealed that (i) SgcC is a two-component, flavin adenine dinucleotide (FAD)-dependent monooxygenase, (ii) SgcC is only active with SgcC2 (peptidyl carrier protein)-tethered substrates, (iii) SgcC-catalyzed hydroxylation requires O 2 and FADH 2, the latter supplied by the C-1027 pathway-specific flavin reductase SgcE6 or Escherichia coli flavin reductase Fre, and (iv) SgcC efficiently catalyzes regioselective hydroxylation of 3-substituted beta-tyrosyl-S-SgcC2 analogues, including the chloro-, bromo-, iodo-, fluoro-, and methyl-substituted analogues, but does not accept 3-hydroxy-beta-tyrosyl-S-SgcC2 as a substrate. Together with the in vitro data for SgcC4, SgcC1, and SgcC3, the results establish that SgcC catalyzes the hydroxylation of ( S)-3-chloro-beta-tyrosyl-S-SgcC2 as the final step in the biosynthesis of the ( S)-3-chloro-5-hydroxy-beta-tyrosine moiety prior to incorporation into C-1027. SgcC now represents the first biochemically characterized two-component, FAD-dependent monooxygenase that acts on a carrier-protein-tethered aromatic substrate.     

Indole methylation protects diketopiperazine configuration in the maremycin biosynthetic pathway

The maremycin biosynthetic gene cluster has been identified in Streptomyces sp. B9173. Comparative metabolic profiling with knockout mutant strains led to the identification of new products correlated to the maremycin biosynthesis, in particular the “demethyl”-maremycins with an unexpected D-tryptophan unit. A biosynthetic pathway for the maremycins is proposed and plausible reasoning for tryptophan epimerization in the demethylmaremycin biosynthesis is also provided.     

Regiospecific chlorination of (S)-beta-tyrosyl-S-carrier protein catalyzed by SgcC3 in the biosynthesis of the enediyne antitumor antibiotic C-1027

C-1027 is a potent antitumor antibiotic composed of an apo-protein and a reactive enediyne chromophore. The chromophore consists of four different chemical subunits including an (S)-3-chloro-4,5-dihydroxy-beta-phenylalanine moiety, the biosynthesis of which from l-alpha-tyrosine is catalyzed by six proteins, SgcC, SgcC1, SgcC2, SgcC3, SgcC4, and SgcC5. Biochemical characterization of SgcC3 unveiled the following: (i) SgcC3 is a flavin adenine dinucleotide (FAD)-dependent halogenase; (ii) SgcC3 acts only on the SgcC2 peptidyl carrier protein-tethered substrates; (iii) SgcC3-catalyzed halogenation requires O2 and reduced FAD and either the C-1027 pathway-specific flavin reductase SgcE6 or E. coli flavin reductase (Fre) can support the SgcC3 activity; (iv) SgcC3 also efficiently catalyzes bromination but not fluorination or iodination; (v) SgcC3 can utilize both (S)- and (R)-beta-tyrosyl-S-SgcC2 but not 3-hydroxy-beta-tyrosyl-S-SgcC2 as a substrate. These results establish that SgcC3 catalyzes the third enzymatic transformation during the biosynthesis of the (S)-3-chloro-4,5-dihydroxy-beta-phenylalanine moiety of C-1027 from l-alpha-tyrosine. SgcC3 now represents the second biochemically characterized flavin-dependent halogenase that acts on a carrier protein-tethered substrate. These findings will facilitate the engineering of new C-1027 analogs by combinatorial biosynthesis methods.     

Combined effect of pH level and surface treatment of Sm2O3, SmBO3 and ATO particles on cure,mechanical and electric properties of EPDM composites

The aim of this study is to investigate the effect of pH level and surface treatment of samarium oxide (Sm₂O₃), samarium borate (SmBO₃) and Sb-doped SnO₂ (ATO) particles on properties of peroxide-cured ethylene–propylene–diene rubber (EPDM) composites. The bis-(-3-(triethoxysilyl)propyl)tetra-sulfide (KH845-4) treated particles were added to EPDM at various filler contents. The pH values of particles, and cure, mechanical and electric properties of the EPDM composites were evaluated. It was found that alkaline SmBO₃ particles would accelerate cure by producing more radicals from dicumyl peroxide (DCP), but acidic ATO particles would retard vulcanization because of making DCP generate less radicals, and neutral Sm₂O₃ particles did not affect the cure process. Moreover, sulfuric linkages from KH845-4 on the filler surface would provide sulfuric radicals to form S–C linkages. Therefore, composites with SmBO₃ exhibited excellent mechanical properties. Additionally, polar fillers could reduce electrical properties of composites due to increased composite polarity.     

Improving flame retardancy and mechanical properties of halogen-free unsaturated polyester resin with diethylene glycol as comonomer

Unsaturated polyester resin (UPR) is a widely applied engineering material with drawbacks of high fire risks and brittleness. In this paper, low-cost diethylene glycol (DEG) was used as one of diols to react with saturated and unsaturated anhydrides for unsaturated polyester pre-polymers. Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatograph were used for studying their structures and differential scanning calorimetry, thermogravimetric analysis (TG) for studying their thermal properties. Incorporated DEG comonomer improves limited oxygen index values of cross-linked UPR from 20 to 26% as the mole proportion of DEG increases from 0 to 50 mol% in diols. Combustion test indicates that the UPR sample with 70 mol% DEG in diols is self-extinguishing with none drop, referring to nonflammable burning grade. What is more, mechanical properties are also increased greatly by comparing with typical UPR base. Pyrolysis behaviors of UPR in nitrogen atmosphere suggest that the polyesters incorporated with DEG will produce more char and residues during the degradation process. By comparing the pyrolysis behaviors of UPR having DEG with those of UPR adding ammonium polyphosphate in TG curves, the flame-retarding mechanism of DEG incorporation is probably due to residual char forming in temperature range of 500–800 °C, which is close to the burning temperature. This study suggests that DEG element increases effectively and environmental friendly the fire safety of UPR materials.

     

放线菌来源生物碱的生物合成机制

生物碱类天然产物通常具有复杂多样的化学结构和广泛的生物活性,因此备受生物学、化学、药学领域研究者的关注。微生物是仅次于植物的生物碱类天然产物重要来源,微生物尤其是放线菌产生的众多次生代谢产物中,也包括很多生物碱。对放线菌来源生物碱的骨架结构和药效基团生物合成研究,不仅能够丰富人们对天然产物结构形成原理的理解,还可以为运用合成生物学技术人工合成此类化合物提供重要的遗传元件。本文从模块化生物合成和非模块化生物合成两种方式,综述放线菌来源生物碱的生物合成基因簇、途径及其酶催化反应过程。     

Functional Genome Mining Reveals a Class V Lanthipeptide Containing a d-Amino Acid Introduced by an F420H2-Dependent Reductase

Lantibiotics are a type of ribosomally synthesized and post-translationally modified peptides (termed lanthipeptides) with often potent antimicrobial activity. Herein, we report the discovery of a new lantibiotic, lexapeptide, using the library expression analysis system (LEXAS) approach. Lexapeptide has rare structural modifications, including N-terminal (N,N)-dimethyl phenylalanine, C-terminal (2-aminovinyl)-3-methyl-cysteine, and d -Ala. The characteristic lanthionine moiety in lexapeptide is formed by three proteins (LxmK, LxmX, and LxmY), which are distinct from enzymes known to be involved in lanthipeptide biosynthesis. Furthermore, a novel F₄₂₀H₂-dependent reductase (LxmJ) from the lexapeptide biosynthetic gene cluster (BGC) is identified to catalyze the reduction of dehydroalanine to install d -Ala. Our findings suggest that lexapeptide is the founding member of a new class of lanthipeptides that we designate as class V. We also identified further class V lanthipeptide BGCs in actinomycetes and cyanobacteria genomes, implying that other class V lantibiotics await discovery.