Control of molecular architecture by hydrogen bonding: mononuclear versus dinuclear copper(II) complexes with tridentate N2O donor Schiff base isomers

Two isomeric Schiff bases, HL ¹  = 1-[(2-dimethylamino-ethylimino)-methyl]-naphthalen-2-ol and HL ²  = 1-[(2-ethylamino-ethylimino)-methyl]-naphthalen-2-ol, have been used to prepare copper(II) complexes in presence of thiocyanate. HL ¹ forms a mononuclear complex [Cu(L ¹ )NCS] with terminal thiocyanate, whereas the isomeric Schiff base HL ² , which is capable of hydrogen bonding, gives a dimeric complex, [Cu₂ (L ² ) ₂(NCS)₂], with double μ-1,1-NCS bridges. Both complexes are characterized by physico-chemical and spectroscopic methods as well as by single crystal X-ray diffraction studies.     

Control of molecular architecture by steric factors: mononuclear vs polynuclear manganese(III) compounds with tetradentate N2O2 donor Schiff bases

Three manganese(III) compounds, [Mn(III)(vanoph)(DMF)(H(2)O)]ClO(4) (1), [Mn(III)(vanoph)(N(3))(H(2)O)]·2H(2)O (2) and [Mn(III)(saloph)(μ(1,3)-N(3))](n) (3), where H(2)vanoph = N,N'-(1,2-phenylene)-bis(3-methoxysalicylideneimine), H(2)saloph = N,N'-(1,2-phenylene)-bis(salicylideneamine) are tetradentate N(2)O(2) ligands and DMF = N,N-dimethylformamide, have been prepared and characterised by elemental analysis, IR and UV-Vis spectroscopy and single-crystal X-ray diffraction studies. Compounds 1 and 2 are monomeric but compound 3 consists of a chain system with the repeating unit [Mn(III)(saloph)(N(3))] bridged by μ-1,3 azide. Compound 1 crystallises in monoclinic space group P2(1)/n with cell dimensions of a = 11.1430(2), b = 16.3594(3), c = 15.4001(3) ?, β = 108.417(1), Z = 4 whereas compounds 2 and 3 crystallise in orthorhombic space groups Pbca and Pna2(1), respectively, with cell dimensions of a = 16.069(3), b = 15.616(3), c = 18.099(4) ?, Z = 8 (for 2) and a = 18.760(9), b = 13.356(5), c = 6.616(3) ?, Z = 4 (for 3). In all the compounds, Mn(III) has a six-coordinated pseudo-octahedral geometry in which O(2), O(3), N(1) and N(2) atoms of the deprotonated di-Schiff base constitute the equatorial plane. In both compounds 1 and 2, water molecules are present in the fifth coordination sites in the apical positions. The sixth coordination sites are occupied by one O atom of a solvent DMF in compound 1 and an N atom of azide in compound 2. The coordinated water initiates hydrogen-bonded networks in both compounds 1 and 2 to form well-isolated supramolecular dimers. At room temperature the χ(M)T values for the compounds 1 and 2 remain almost constant until 30 K. Below this temperature, the χ(M)T values drastically drop to 0.72 cm(3) mol(-1) K for 1 and 0.52 cm(3) mol(-1) K for 2. The best fits were obtained with J = -0.92 cm(-1), |D| = 2.05 cm(-1), g = 2.0 and R = 8.1 × 10(-4) for 1 and J = -1.16 cm(-1), |D| = 2.05 cm(-1), g = 2.0 and R = 1.2 × 10(-3) for 2. However, in compound 3, two axial positions are occupied by the azide ions. The Mn···Mn repeating distance is 6.616 ? along the chain. Magnetic characterisation shows that the μ(1,3)-bridging azide ion mainly transmits an antiferromagnetic interaction (J = -6.36 cm(-1)) between Mn(III) ions. The presence of two methoxy groups increases the steric crowding in the H(2)vanoph moiety and thereby inhibits the formation of a polynuclear compound with this ligand.     

Junction capacitance study of an oxygen impurity defect exhibiting configuration relaxation in amorphous silicon–germanium alloys deposited by hot-wire CVD

We report the observation of light induced electron capture in oxygen contaminated (～5 × 10²⁰ cm^?3) hydrogenated amorphous silicon–germanium alloys grown by hot-wire chemical vapor deposition (HWCVD). By examining the time evolution of dark capacitance after 1.2 eV photoexcitation, we are able to estimate the free energy barrier (?0.8 eV) for the release of electrons into the conduction band. Such a large thermal barrier, for a defect whose optical threshold is centered (～1.35 eV) so close to the band-gap (1.5 eV), indicates significant configurational relaxation once the oxygen impurity state is occupied with photoexcited electrons.     

On the Dynamic Interaction of n‐Butane with Imidazolium‐Based Ionic Liquids

The impact of a reactant from the gas phase on the surface of a liquid and its transfer through this gas/liquid interface are crucial for various concepts applying ionic liquids (ILs) in catalysis. We investigated the first step of the adsorption dynamics of n‐butane on a series of 1‐alkyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide ILs ([C_nC₁Im][Tf₂N]; n=1, 2, 3, 8). Using a supersonic molecular beam in ultra‐high vacuum, the trapping of n‐butane on the frozen ILs was determined as a function of surface temperature, between 90 and 125 K. On the C₈‐ and C₃‐ILs, n‐butane adsorbs at 90 K with an initial trapping probability of ≈0.89. The adsorption energy increases with increasing length of the IL alkyl chain, whereas the ionic headgroups seem to interact only weakly with n‐butane. The absence of adsorption on the C₁‐ and C₂‐ILs is attributed to a too short residence time on the IL surface to form nuclei for condensation even at 90 K.     

Anion directed templated synthesis of mono- and di-Schiff base complexes of Ni(II)

Two sets of Schiff base ligands, set-1 and set-2 have been prepared by mixing the respective diamine (1,2-propanediamine or 1,3-propanediamine) and carbonyl compounds (2-acetylpyridine or pyridine-2-carboxaldehyde) in 1:1 and 1:2 ratios, respectively and employed for the synthesis of complexes with Ni(II) perchlorate and Ni(II) thiocyanate. Ni(II) perchlorate yields the complexes having general formula [NiL₂](ClO₄)₂ (L = L¹ [N¹-(1-pyridin-2-yl-ethylidine)-propane-1,3-diamine] for complex 1, L² [N¹-pyridine-2-ylmethylene-propane-1,3-diamine] for complex 2 or L³ [N¹-(1-pyridine-2-yl-ethylidine)-propane-1,2-diamine] for complex 3) in which the Schiff bases are mono-condensed terdentate whereas Ni(II) thiocyanate results in the formation of tetradentate Schiff base complexes, [NiL](SCN)₂ (L = L⁴ [N,N′-bis-(1-pyridine-2-yl-ethylidine)-propane-1,3-diamine] for complex 4, L⁵ [N,N′-bis(pyridine-2-ylmethyline)-propane-1,3-diamine] for complex 5 or L⁶ [N,N′-bis-(1-pyridine-2-yl-ethylidine)-propane-1,2-diamine] for complex 6) irrespective of the sets of ligands used. Formation of the complexes has been explained by anion modulation of cation templating effect. All the complexes have been characterized by elemental analyses, spectral and electrochemical results. Single crystal X-ray diffraction studies confirm the structures of four representative members, 1, 3, 4 and 5; all of them have distorted octahedral geometry around Ni(II). The bis-complexes of terdentate ligands, 1 and 3 are the mer isomers and the complexes of tetradentate ligands, 4 and 5 possess trans geometry.     

Unique in situ reduction of copper(ii) forming an interesting photoluminescent stair-polymer of copper(i) with a Cu(2)S(2) core

A novel thiocyanate bridged one-dimensional copper(i) polymer, [CuL(μ-1,1,3-SCN)](n) (L = 5,6-diphenyl-2,3-dihydropyrazine), has been synthesized and characterized by X-ray crystallography. The complex features a copper(i) stair-step polymeric coordination network with a Cu(2)S(2) core. The complex shows strong fluorescence.     

Mechanical Downsizing of a Gadolinium(III)‐based Metal–Organic Framework for Anticancer Drug Delivery

A Gd^III‐based porous metal–organic framework (MOF), Gd‐pDBI, has been synthesized using fluorescent linker pDBI (pDBI=(1,4‐bis(5‐carboxy‐1H‐benzimidazole‐2‐yl)benzene)), resulting in a three‐dimensional interpenetrated structure with a one‐dimensional open channel (1.9×1.2 nm) filled with hydrogen‐bonded water assemblies. Gd‐pDBI exhibits high thermal stability, porosity, excellent water stability, along with organic‐solvent and mild acid and base stability with retention of crystallinity. Gd‐pDBI was transformed to the nanoscale regime (ca. 140 nm) by mechanical grinding to yield MG‐Gd‐pDBI with excellent water dispersibility (>90 min), maintaining its porosity and crystallinity. In vitro and in vivo studies on MG‐Gd‐pDBI revealed its low blood toxicity and highest drug loading (12 wt %) of anticancer drug doxorubicin in MOFs reported to date with pH‐responsive cancer‐cell‐specific drug release.     

n-Butane,iso-Butane and 1-Butene Adsorption on Imidazolium-Based Ionic Liquids Studied with Molecular Beam Techniques

The interaction of molecules, especially hydrocarbons, at the gas/ionic liquid (IL) surface plays a crucial role in supported IL catalysis. The dynamics of this process is investigated by measuring the trapping probabilities of n-butane, iso-butane and 1-butene on a set of frozen 1-alkyl-3-methylimidazolium-based ILs [C_nC₁Im]X, where n=4, 8 and X⁻=Cl⁻, Br⁻, [PF₆]⁻ and [Tf₂N]⁻. The decrease of the initial trapping probability with increasing surface temperature is used to determine the desorption energy of the hydrocarbons at the IL surfaces. It increases with increasing alkyl chain length n and decreasing anion size for the ILs studied. We attribute these effects to different degrees of alkyl chain surface enrichment, while interactions between the adsorbate and the anion do not play a significant role. The adsorption energy also depends on the adsorbing molecule: It decreases in the order n-butane>1-butene>iso-butane, which can be explained by different dispersion interactions.