Stable all-optical formation of Bose–Einstein condensate using pointing-stabilized optical trapping beams

By stabilizing the beam pointing of optical trapping beams, we have succeeded in stable formation of Bose–Einstein condensate (BEC) of ⁸⁷Rb with all-optical method. The thermal effect of acousto-optic modulator (AOM) is usually one of the most serious problems to induce beam-pointing instability, especially for high power CO₂ laser. By passing the beam through AOM twice, we have improved the beam pointing from about 4.8 mrad to less than 0.4 mrad, which has been experimentally confirmed to be small enough to stably form BEC at the crossed region of CO₂ lasers as well as to perform experiments using an optical lattice which might have been affected by beam-pointing instability. PACS 32.80.Pj; 42.79.Jq; 03.75.Mn     

One step synthesis of 2-substituted 3-tri-(or di-)fluoromethyl-2-propenals in an ionic liquid

Investigation of one step synthesis of 2-substituted 3-tri-(or di-)fluoromethyl-2-propenals has been carried out using versatile aldehydes, tri- or di-fluoroacetaldehyde ethyl hemiacetal in the presence of diethylaminotrimethylsilane (DEATMS) in an ionic liquid, and it was demonstrated that this route enabled us to successfully construct 2-substituted 3-tri-(or di-)fluoromethyl-2-propenals with the high level selectivity of geometric isomers.     

Interfacial adsorption state of protonated lipophilic porphyrins in a liquid-liquid system by using reflection spectrometry.

Analysis by reflection spectrometry was performed to clarify the interfacial adsorption of protonated lipophilic tetraphenylporphyrin derivatives in a dodecane-aqueous sulfuric acid system, and to confirm the utility of partial reflection spectroscopy. Interfacial adsorption was not observed for porphyrins substituted at the 2,6 positions of meso-phenyl groups, suggesting that the substituents prevent porphyrins from forming aggregates by steric hindrance. Polymorphous J-aggregates of acid dications were produced by tetra-p-tolylporphyrin with a saturated interfacial molecular density of 1.0 x 10(-10) mol cm(-2), which could yield 48 degrees as a mean tilting angle of the pyrrole ring plane from the interface normal. Partial-reflection spectrometry can provide sensitive detection and molecular orientation analysis of interfacial adsorbates.     

Acoustic characteristics of Ni–Nb–Zr–H glassy alloys by ultrasonic shear waves

The propagation characteristics of shear horizontally polarized (SH) waves passing through (Ni₄₂Nb₂₈Zr₃₀)_100–x H_x (x = 0–15.2) glassy alloys were investigated as a function of hydrogen content. With an increase in hydrogen content, the propagation time and main frequency of the receiving waves show increase and decrease, respectively, indicating expan‐ sion in average atomic distance which comes from solution of hydrogen. In sharp contrast to crystalline alloys, the decrease in damping ratio and the delay in phase with increasing hydrogen suggest a strong settlement of hydrogen into four‐coordination sites surrounded tetrahedrally by four Zr atoms and the resulting increase in dynamic elasticity, respectively. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of a cyclodextrin dimer linked with a bis(picolinyl)cystine moiety and its intra- and intermolecular inclusion behavior

A novel cyclodextrin (CD) dimer linked with a bis(picolinyl)cystine (Cys) moiety was prepared by the coupling of Boc-protected Cys with amino-modified CDs, followed by deprotection of the Boc groups and bispicolinylation. The dimer showed less affinity to an organic guest molecule compared to that of a native CD monomer. It was attributed to an intramolecular inclusion of the pyridine moiety into CD cavity. The dimer caused significant increase of its organic guest affinity by an addition of a copper ion. The included pyridine group may come out of a CD cavity to bind the copper ion and the two CDs included cooperatively and intermolecularly a guest molecule with high affinity.     

A new biodegradable polydepsipeptide microsphere for application in drug delivery systems

A sequential polydepsipeptide containing a tripeptide sequence L-alanyl-Lalanyl-ethyl L-glutamyl and an-hydroxy acid L-lactic acid, poly(Ala-Ala-Glu(OEt)-Lac), was synthesized to prepare the microspherical particles by the solvent evaporation process. In this case, the solvents play the most important role for the preparation of polydepsipeptide microspheres and, as an example, when 200 mg of the polydepsipeptide dissolved in 10 ml of 98/2% chloroform/dichloroacetic acid mixture was stirred at 400 rpm and 30 C, the microspherical particles with mean diameter of 58m were formed after pouring into 200 ml of 1% (w/v) poly(vinyl alcohol) solution. 17-Estradiol was incorporated into the particles, and the resulting particles were found to contain 5 mg of drug per 25 mg of the particle. The in vivo release of drug from the microspherical formulation was evaluated by measuring the pharmacological influence on rat prostate. It was found that the sufficient amount of drug, keeping the effective pharmacological influence, is supplied during the first 12-week period, followed by an incomplete supplying of drug intil the implant is perfectly degraded in vivo in the 25th week from the start of implantation.     

Inhibitory effects of 3-O-acyl-(+)-catechins on Epstein-Barr virus activation

In the course of an exploratory investigation of antitumor-promoting catechins, 3-O-acyl-(+)-catechins of varying carbon lengths from C(4) to C(18) were assessed for inhibitory effects on the activation of the Epstein-Barr virus early antigen. Like 3-O-acyl-(-)-epigallocatechins, the (+)-catechin derivatives showed promising effects with the C-3 acyl chain of C(8)-C(11) carbon atoms.     

Preparation and lithium doping of gallium oxynitride by ammonia nitridation via a citrate precursor route

Gallium oxynitride, isostructural to hexagonal gallium nitride (h-GaN), was obtained by ammonia nitridation of a precursor prepared from the addition of citric acid to an aqueous solution of gallium nitrate. Gallium oxynitride produced at 750 °C had a small amount of gallium vacancies, and was formulated as (Ga_0.89□_0.11) (N_0.66O_0.34) where the symbol □ stands for gallium vacancy. Both the gallium vacancies and oxygen substituted for nitrogen were randomly distributed within the structure. The amount of vacancies decreased with nitridation temperatures in the range of 750-850 °C. Approximately, 10 at% Li⁺ was doped into the gallium oxynitride, using a similar preparation with the additional presence of lithium nitrate, resulted in the random substitution of Ga³⁺ in an atomic ratio of Li/Ga<1 at 750 °C. Oxygen was codoped with lithium and substituted nitrogen in the wurtzite-type crystal lattice. These substitutions reduced the electrical conductivity in the gallium oxynitride semiconductor. A new oxynitride, Li₂Ga₃NO₄, was also obtained with Li₂CN₂ impurity using similar preparations from a mixture of Li/Ga?1. The crystal structure was isostructural with h-GaN, and was refined as P6₃mc with a=0.31674(1) nm, and c=0.50854(2) nm. The Ga and Li occupancies at the 2b site were refined to be 0.6085 and 0.3915, respectively, assuming that the other 2b site was randomly occupied with 1/5O and 4/5N. When the new compound was washed for over 1 min for the removal of Li₂CN₂ impurities, it was decomposed to a mixture of α-GaOOH and α-LiGaO₂. The as-prepared product with Li/Ga=1 showed the highest intensity in yellow luminescence among the products under excitation at 254 nm.     

Symmetry or asymmetry in cheletropic additions forming cyclopropanes

Cheletropic additions forming cyclopropane rings were studied theoretically. Ten addition paths were traced by means of density-functional-theory calculations. Two 1,4-dienes, 1,4-pentadiene, and tricyclo[5.3.1.0^4,9]undeca-2,5-diene were adopted as substrates. CO, SO₂, C₂H₅PCl₂, CCl₂ and SiCl₂ were employed as cheletropic reagents (Xs). An orbital correlation diagram of the Woodward–Hoffmann (W–H) rule and frontier molecular orbital (FMO) interactions between them were investigated in detail. The FMO interactions, HOMO (1,4-diene)lumo (X) and homo (X)LUMO (diene), work reasonably for the progress of the reactions. Those cause the formation of two C–X bonds and a cyclopropane ring, and alternation of double bonds to single bonds. All the additions are concerted. The easiness of the ring formation depends upon the energy gap between HOMO and lumo and that between homo and LUMO, and the spatial directions of HOMO and LUMO extensions. Symmetry conservation of the W–H rule does not hold necessarily for those addition paths. The symmetry-breaking was discussed in terms of FMO interactions.Acknowledgement This work was supported by a Grant-in-Aid for Scientific Research from the Ministry of Education, Science and Culture, Japan and by Nishida Memorial Foundation for Fundamental Chemical Research.     

Optimal Kinoshita wave functions for heliumlike atoms

An extensive optimization has been performed for the composition ofN terms, as well as the exponent and the mixing coefficients, of Kinoshita wave functions for heliumlike atoms with atomic numberZ. The optimalN-term Kinoshita functions have been constructed forN=1–10, 20, 30, 40, 50, 100 andZ=1(H^–)–10(Ne⁸⁺). The present results demonstrate that the optimal term selection dramatically improves the accuracy of the Kinoshita function: In the case of He, for example, the optimal 100-term Kinoshita function gives – 2.903 724 376 95 hartrees, which is only 8×10^–11 hartrees higher than the most accurate literature value.