Simultaneous imaging of the structure and fluorescence of a supramolecular nanostructure formed by the coupling of π‐conjugated polymer chains in the intermolecular interaction

We fabricated a micrometer‐long supramolecular chain in which π‐conjugated polyrotaxane was coupled. A new experimental setup was designed and constructed, and the simultaneous direct imaging of the structure and fluorescent function was achieved. Furthermore, we identified the formation of a polymer intertwined network and observed novel fluorescence due to a long‐range interaction via this intertwined network over a distance of 5 μm or more without quenching over 15 min in the near field. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 801–809, 2006     

Hydration Structure Around the Carboxyl Group Studied by Neutron Diffraction with 12C/13C and H/D Isotopic Substitution Methods

Time-of-Flight (TOF) neutron diffraction measurements have been carried out on aqueous 8 mol% sodium acetate solutions in D₂O. Scattering cross sections that were observed for sample solutions involving ¹²C/¹³C and H/D isotopically substituted acetate ions were used to derive the first-order difference functions, Δ_H(Q) and Δ_C(Q), and corresponding distribution functions, G _H(r;r) and G _C(r;r), which describe the environmental structure around the methyl and the carboxyl groups within the acetate ion, respectively. Structural parameters concerning the first hydration shell of the carboxyl group within the acetate ion were obtained through the least squares fit to the observed intermolecular difference function, Δ_C ^inter(Q). The nearest neighbor C _O...D _W1 (C_O: carboxyl carbon atom, D_W1: water deuterium atom) distance, r(C _O...D _W1 ), and the angle, ∠ C _O ...D _W1 -O _W (O _W : water oxygen atom), were determined to be 2.63(1) Å and 120(1)°, respectively. The coordination number, n(C _O ...D _W1 ), was obtained to be 4.0(1). These results are consistent with the hydration structure in which water molecules in the first hydration shell of the carboxyl group are hydrogen-bonded with oxygen atoms of the carboxyl group.     

Effect of adsorbed water on the electrorheology of silica suspensions

Monodisperse silica particles were formed by hydrolyzing tetraethylorthosilicate in an ethanol solution and the silica suspensions dispersed in a silicone oil were prepared by a different procedure. The effects of adsorbed water on the electrorheological (ER) behavior were studied under oscillatory shear. The amounts of adsorbed water and surface silanol groups were determined by thermogravimetric analysis. The magnitude of the complex viscosity, |η^*|, increases with the application of electric fields. The physically adsorbed water is primarily responsible for the ER effect. However, the fluids containing large amounts of adsorbed water do not always show excellent ER performance. The surface silanol groups have an important role in promoting the ER effect. Not only the amount but also the situation of silanol groups determines the ER activity of adsorbed water.     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Vibrational energies for the X1A1, A1B1, and B1A1 states of SiH2/SiD2 and related transition probabilities based on global potential energy surfaces

Transition probabilities were evaluated for the X(1)A(1)-A(1)B(1) and A(1)B(1)-B(1)A(1) systems of SiH(2) and SiD(2) to analyze the X-->A-->B photoexcitation. The Franck-Condon factors (FCFs) and Einstein's B coefficients were computed by quantum vibrational calculations using the three-dimensional potential energy surfaces (PESs) of the SiH(2)(X(1)A(1),A(1)B(1),B(1)A(1)) electronic states and the electronic transition moments for the X-A, X-B, and A-B system. The global PESs were determined by the multireference configuration interaction calculations with the Davidson correction and the interpolant moving least-squares method combined with the Shepard interpolation. The obtained FCFs for the X-A and A-B systems exhibit that the bending mode is strongly enhanced in the excitation since the equilibrium bond angle greatly varies with the three states; the barrier to linearity is evaluated to be 21,900 cm(-1) for the X state, 6400 cm(-1) for the A state, and 230-240 cm(-1) for the B state. The theoretical lifetimes for the pure bending levels of the A and B states were calculated from the fluorescence decay rates for the A-X, B-A, and B-X emissions.     

Improvement of some pharmaceutical properties of nocloprost by β- and γ-Cyclodextrin Complexation

Inclusion complexation of nocloprost, a potent antiulcer prostaglandin derivative, with -, -, and -cyclodextrins (CyDs) in aqueous solutions has been studied by the solubility method and¹³C-NMR spectroscopy. The steric requirement of host-guest interaction was reflected in the magnitude of the stability constants and the thermodynamic parameters of the inclusion complexes. Solid complexes of nocloprost with - and -CyDs in a molar ratio of 1 : 2 were obtained on the basis of aBs-type phase solubility diagram. The X-ray diffraction data suggested that nocloprost is included in the cylindrical channel formed by coaxial alignment of -CyD molecules to give a channel type structure. Release and thermal behavior of the solid complexes was examined and compared with nocloprost itself. The results indicated that the -CyD complex may have great utility among the three CyDs, being a rapid dissolving form of nocloprost with improved thermal stability.     

Anticoagulant activity of immobilized thrombomodulin

Bovine lung thrombomodulin was partially purified, and immobilized on agarose gel (Sepharose 4B). Immobilized thrombomodulin inhibited the procoagulant activity of thrombin, and enhanced the thrombin-catalyzed protein C activation. The plasma recalcification time test showed that immobilized thrombomodulin prolonged plasma clotting time. It is suggested that the immobilization of thrombomodulin will provide an antithrombogenic biomaterial able to convert thrombin from a procoagulant to an anticoagulant enzyme.     

Synthesis,structure, and magnetic properties of dinuclear cobalt(II) complexes with a new phenol-based dinucleating ligand with four hydroxyethyl chelating arms

A new end-off type acyclic ligand with four hydroxyethyl arms, 2,6-bis[bis(2-hydroxyethyl)aminomethyl]-4-methylphenol [H(bhmp)], formed dinuclear cobalt(II) complexes [Co(2)(bhmp)(OAc)(2)]BPh(4) (1) and [Co(2)(bhmp)(OBz)(2)]BPh(4) (2). The complex 1.2.5CH(3)CN (C(50)H(62.5)BCo(2)N(4.5)O(9)) crystallizes in the monoclinic space group C2/c with dimensions a = 25.424(5) A, b = 13.376(2) A, c = 29.913(6) A, beta = 105.930(3) degrees, and V = 9781(3) A(3) and with Z = 8. X-ray diffraction analysis revealed a mu-phenoxo-bis(mu-acetato)dicobalt(II) core structure containing two octahedral cobalt(II) ions. Electronic spectra were investigated for 1 and 2 in the range 400-1800 nm, and the data were typical for the octahedral high-spin cobalt(II) complexes. Magnetic susceptibility was measured for 1 and 2 over the temperature range 4.5-300 K, and the data were analyzed well using our theoretical method. The best fitting parameters were kappa = 0.77, lambda = -116 cm(-1), Delta = 572 cm(-1), and J = -0.44 cm(-1) for complex 1 and kappa = 0.96, lambda = -93 cm(-1), Delta = 616 cm(-1), and J = -0.33 cm(-1) for complex 2.     

Construction of a data base for cobalt-59 nuclear magnetic resonance spectrometry

The TOOL-IR. PDB and COOD systems are compared for the construction of data bases for ⁵⁹Co-n.m.r. bibliographic and spectral data. The spectral data used are the chemical shifts from several different standards, and the line widths and coupling constants (if present). The PDB system is effective for storage and retrieval of bibliographic data, but the COOD system is better for the retrieval of spectral data, and for combination of data files on literature and chemical shifts.