Laser cleaning of glass

The pulse lasers, YAG-, CO₂-, and N₂-lasers, are examined for use in the cleaning of glass. Cleaning is found to be due to the evaporation and sputtering of stains on the glass by the heat energy of the laser light. Only the N₂ laser can be used for the cleaning of the exit surface of the glass (the opposite side to the laser). A laser with a high peak power of about 10⁶J/s and short-pulse duration below 100 ns is found to be necessary in practice.     

Reduction of dislocation density and improvement of optical quality in ZnO layers by MgO-buffer annealing

Optical properties of ZnO thin films with/without MgO-buffer annealing were investigated by low and room temperature photoluminescence measurements. The ZnO films were grown on c-sapphire substrates by plasma-assisted molecular-beam epitaxy employing a thin MgO-buffer layer. Dislocation density of ZnO layer was reduced from 5.3 × 10⁹ to 1.9 × 10⁹ cm⁻² by annealing MgO-buffer prior to the growth of ZnO. The intensity of free exciton emission from the sample with MgO-buffer annealing was almost twice of that from the sample without annealing, while the deep level emission from the sample with MgO-buffer annealing was about 1/3 of that without annealing. The MgO-buffer annealing improves optical quality of overgrown ZnO films.     

Optical characterization of CdTe/ZnSe fractional monolayer structures grown by atomic layer epitaxy

Luminescence properties of CdTe/ZnSe fractional monolayer grown by atomic layer epitaxy have been investigated. To investigate the origin of the highly efficient luminescence, various optical spectroscopic methods such as, photoluminescence (PL), temporal/spatial resolved PL, temperature dependence PL, and excitation power dependence PL have been used. It is found that structural inhomogeneities affect dominant influence on the line width and line shape of luminescence. The luminescence intensity greatly enhanced by the localization of exciton at the disorder induced localized states.     

Simultaneous imaging of the structure and fluorescence of a supramolecular nanostructure formed by the coupling of π‐conjugated polymer chains in the intermolecular interaction

We fabricated a micrometer‐long supramolecular chain in which π‐conjugated polyrotaxane was coupled. A new experimental setup was designed and constructed, and the simultaneous direct imaging of the structure and fluorescent function was achieved. Furthermore, we identified the formation of a polymer intertwined network and observed novel fluorescence due to a long‐range interaction via this intertwined network over a distance of 5 μm or more without quenching over 15 min in the near field. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 801–809, 2006     

Hydration Structure Around the Carboxyl Group Studied by Neutron Diffraction with 12C/13C and H/D Isotopic Substitution Methods

Time-of-Flight (TOF) neutron diffraction measurements have been carried out on aqueous 8 mol% sodium acetate solutions in D₂O. Scattering cross sections that were observed for sample solutions involving ¹²C/¹³C and H/D isotopically substituted acetate ions were used to derive the first-order difference functions, Δ_H(Q) and Δ_C(Q), and corresponding distribution functions, G _H(r;r) and G _C(r;r), which describe the environmental structure around the methyl and the carboxyl groups within the acetate ion, respectively. Structural parameters concerning the first hydration shell of the carboxyl group within the acetate ion were obtained through the least squares fit to the observed intermolecular difference function, Δ_C ^inter(Q). The nearest neighbor C _O...D _W1 (C_O: carboxyl carbon atom, D_W1: water deuterium atom) distance, r(C _O...D _W1 ), and the angle, ∠ C _O ...D _W1 -O _W (O _W : water oxygen atom), were determined to be 2.63(1) Å and 120(1)°, respectively. The coordination number, n(C _O ...D _W1 ), was obtained to be 4.0(1). These results are consistent with the hydration structure in which water molecules in the first hydration shell of the carboxyl group are hydrogen-bonded with oxygen atoms of the carboxyl group.     

Effect of adsorbed water on the electrorheology of silica suspensions

Monodisperse silica particles were formed by hydrolyzing tetraethylorthosilicate in an ethanol solution and the silica suspensions dispersed in a silicone oil were prepared by a different procedure. The effects of adsorbed water on the electrorheological (ER) behavior were studied under oscillatory shear. The amounts of adsorbed water and surface silanol groups were determined by thermogravimetric analysis. The magnitude of the complex viscosity, |η^*|, increases with the application of electric fields. The physically adsorbed water is primarily responsible for the ER effect. However, the fluids containing large amounts of adsorbed water do not always show excellent ER performance. The surface silanol groups have an important role in promoting the ER effect. Not only the amount but also the situation of silanol groups determines the ER activity of adsorbed water.     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Rotational isomerism involving an acetylenic carbon. Part 5: Restricted rotation about acetylenic axis in sterically crowded bis(1-phenyl-9-anthryl)ethynes

The title sterically crowded di-9-anthrylethyne derivative with 3,5-ⁱPr₂-phenyl groups at 1-position showed a barrier to rotation about the acetylenic axis of 18.0 kcal mol⁻¹ based on a dynamic NMR study, which is an extremely high value for acyclic diarylethynes. The mechanism of the dynamic stereochemistry and the substituent effect on the rotational barrier are discussed.     

Studies on antiallergic agents. I. Synthesis and antiallergic activity of novel pyrazine derivatives.

Various pyrazine derivatives were synthesized and their antiallergic activity was examined. The inhibitory activity on allergic histamine release of the compounds bearing a 5-tetrazolyl group was more potent than that of the corresponding carboxyl derivatives. The introduction of -CONH- or -NHCO- between the pyrazine ring and the 5-tetrazolyl group as a spacer greatly enhanced the activity. N-(1H-Tetrazol-5-yl)-2-pyrazinecarboxamide (I-3) was estimated to exhibit nearly the same potency as disodium cromoglycate (DSCG). The structure-activity relationship among various derivatives modified by introducing some substituents onto the 3-, 5- or 6-position of the pyrazine ring of I-3 was investigated. The activity remained unchanged or was reduced when such substituents as methyl, chloro, methoxy, methylamino and dimethylamino were introduced at the 3- or 5-position. In contrast, 6-substitution with various alkylamino groups more or less increased the activity. Among them, the 6-dimethylamino (I-17c) and 6-(1-pyrrolidinyl) (I-34) derivative were proved to be most potent. The IC50 values (concentration which produces 50% inhibition of the allergic histamine release) of I-17c and I-34 were determined to be 4.7 x 10(-10) and 4.6 x 10(-10) M, respectively. These two compounds produced a potent inhibitory activity on passive cutaneous anaphylaxis (PCA) in rat, not only by the intravenous route (ED50 = 0.0096 mg/kg for both compounds) but also by the oral route (ED50 = 0.19 and 0.18 mg/kg, respectively). On the other hand, when the pyrazine ring of some representative compounds was replaced with a pyridine ring, the inhibitory activity on histamine release was significantly reduced.     

Comparison of the compact dry TC method with the standard pour plate method (AOAC official method 966.23) for determining aerobic colony counts in food samples: Performance-tested method

Compact Dry TC qualifies as a rapid method kit for determining aerobic colony counts in foods. The plates are presterilized and contain culture medium and a cold-soluble gelling agent. The medium is rehydrated by inoculating 1 mL diluted sample into the center of the self-diffusible medium and allowing the solution to diffuse by capillary action. The plates can then be incubated and the colonies counted without any additional steps. The Compact Dry TC method was validated with 5 different raw meats. The performance tests were conducted at 35 degrees and 30 degrees C. In all required performance studies, no apparent differences were observed between the Compact Dry TC method and the Standard Pour Plate method (AOAC Official Method 966.23) for the detection level of aerobic microorganisms. For the accuracy claim (n = 60), a correlation factor of r2(35) = 0.9977 (35 degrees C) and r2(30) = 0.9932 (30 degrees C) could be assigned, as stated in the application for "Performance Tested Method." Quality consistency and storage robustness studies, showed no significant variations in plate count results with different production lots or plates of diverse storage age.