Large-volume injection electrothermal AAS combined with tungsten-treated pyrolytic graphite furnace: determination of cadmium in tap, snow and river water samples with phosphate modifier.

A large-volume (100 microl) injection-ETAAS with W-treated PG furnace combined with a phosphate modifier was applied to the determination of unpolluted levels of Cd in tap, snow and river-water samples. The limit of detection of 1.1 ng l(-1) was observed for a 4 w/v% NH4H2PO4 modifer. Matrix interference studies were tested for major ion species well found in fresh water. The direct determination of Cd in certified river water (12 +/- 2 ng l(-1)) was carried out and the observed value was in agreement with the certified one. The good recoveries of Cd added to real environmental water samples were also observed. This method was applied to the determination of Cd in unpolluted environmental water samples.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Simultaneous imaging of the structure and fluorescence of a supramolecular nanostructure formed by the coupling of π‐conjugated polymer chains in the intermolecular interaction

We fabricated a micrometer‐long supramolecular chain in which π‐conjugated polyrotaxane was coupled. A new experimental setup was designed and constructed, and the simultaneous direct imaging of the structure and fluorescent function was achieved. Furthermore, we identified the formation of a polymer intertwined network and observed novel fluorescence due to a long‐range interaction via this intertwined network over a distance of 5 μm or more without quenching over 15 min in the near field. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 801–809, 2006     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

Hydration Structure Around the Carboxyl Group Studied by Neutron Diffraction with 12C/13C and H/D Isotopic Substitution Methods

Time-of-Flight (TOF) neutron diffraction measurements have been carried out on aqueous 8 mol% sodium acetate solutions in D₂O. Scattering cross sections that were observed for sample solutions involving ¹²C/¹³C and H/D isotopically substituted acetate ions were used to derive the first-order difference functions, Δ_H(Q) and Δ_C(Q), and corresponding distribution functions, G _H(r;r) and G _C(r;r), which describe the environmental structure around the methyl and the carboxyl groups within the acetate ion, respectively. Structural parameters concerning the first hydration shell of the carboxyl group within the acetate ion were obtained through the least squares fit to the observed intermolecular difference function, Δ_C ^inter(Q). The nearest neighbor C _O...D _W1 (C_O: carboxyl carbon atom, D_W1: water deuterium atom) distance, r(C _O...D _W1 ), and the angle, ∠ C _O ...D _W1 -O _W (O _W : water oxygen atom), were determined to be 2.63(1) Å and 120(1)°, respectively. The coordination number, n(C _O ...D _W1 ), was obtained to be 4.0(1). These results are consistent with the hydration structure in which water molecules in the first hydration shell of the carboxyl group are hydrogen-bonded with oxygen atoms of the carboxyl group.     

Effect of adsorbed water on the electrorheology of silica suspensions

Monodisperse silica particles were formed by hydrolyzing tetraethylorthosilicate in an ethanol solution and the silica suspensions dispersed in a silicone oil were prepared by a different procedure. The effects of adsorbed water on the electrorheological (ER) behavior were studied under oscillatory shear. The amounts of adsorbed water and surface silanol groups were determined by thermogravimetric analysis. The magnitude of the complex viscosity, |η^*|, increases with the application of electric fields. The physically adsorbed water is primarily responsible for the ER effect. However, the fluids containing large amounts of adsorbed water do not always show excellent ER performance. The surface silanol groups have an important role in promoting the ER effect. Not only the amount but also the situation of silanol groups determines the ER activity of adsorbed water.     

Sensitive determination of anandamide in rat brain utilizing a coupled-column HPLC with fluorimetric detection

A fluorimetric determination method for N-arachidonoylethanolamine (anandamide) was developed using a precolumn fluorescence derivatization followed by coupled-column high-performance liquid chromatography (HPLC). Anandamide extracted from the rat brain tissue was derivatized with 4-N-chloroformylmethyl-N-methylamino-7-N, N-dimethylaminosulfonyl-2,1,3-benzoxadiazole (DBD-COCl), purified by a solid-phase extraction (Emporetrade mark), and assayed by the coupled-column HPLC. The HPLC consisted of phenyl (100 x 4.6 mm i.d. ) and octadecylsilica columns (250 x 4.6 mm i.d.), both connected by a six-port valve. The concentration of anandamide in rat brain was 3. 37 +/- 0.73 pmol/g with 6.47 and 3.57% of intra- and inter-day precisions, respectively. Using this method, we investigated the alteration of anandamide concentration in rat brain 30 min after administration of anandamide (2 mg/kg, i.p.) to rats pretreated with or without phenylmethylsulfonyl fluoride (PMSF; 30 mg/kg, i.p.), an inhibitor of amidohydrolase. In rats pretreated with PMSF, the brain concentration of anandamide was approx. 16-fold higher than that of rats without PMSF (p < 0.01).     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Reactions of protoberberine-type alkaloids—XI : Synthesis of optically active ochotensanes

Treatment of l(14S)-β-canadine methochloride (1b) and d(14R)-β-canadine methochloride (1c) with organometals gave d- (2b) and l-2,3-methylenedioxy-9,10-dimethoxyochotensanes (2c), respectively. The structures of these derivatives were proved by chemical and spectral means. The CD spectra of 2b showed Davydov split extrema centered at 284 nm with a positive first Cotton effect, while 2c showed the antipodal curve of 2b. Consequently, the absolute configurations of 2b and 2c were concluded the 14R and 14S, respectively.Application of the anionic rearrangement to N-methyltharictricavine chloride (15) led to 2,3 - methylenedioxy - 9,10 - dimethoxy - 13 - methylochotensane (18) together with the Hofmann methines 16 and 17. The stereochemistry of 18 was confirmed in terms of the nuclear Overhauser effects.     

A new biodegradable polydepsipeptide microsphere for application in drug delivery systems

A sequential polydepsipeptide containing a tripeptide sequence L-alanyl-Lalanyl-ethyl L-glutamyl and an-hydroxy acid L-lactic acid, poly(Ala-Ala-Glu(OEt)-Lac), was synthesized to prepare the microspherical particles by the solvent evaporation process. In this case, the solvents play the most important role for the preparation of polydepsipeptide microspheres and, as an example, when 200 mg of the polydepsipeptide dissolved in 10 ml of 98/2% chloroform/dichloroacetic acid mixture was stirred at 400 rpm and 30 C, the microspherical particles with mean diameter of 58m were formed after pouring into 200 ml of 1% (w/v) poly(vinyl alcohol) solution. 17-Estradiol was incorporated into the particles, and the resulting particles were found to contain 5 mg of drug per 25 mg of the particle. The in vivo release of drug from the microspherical formulation was evaluated by measuring the pharmacological influence on rat prostate. It was found that the sufficient amount of drug, keeping the effective pharmacological influence, is supplied during the first 12-week period, followed by an incomplete supplying of drug intil the implant is perfectly degraded in vivo in the 25th week from the start of implantation.