Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Collection of iron(III) from homogeneous aqueous solutions on membrane filters using Chromazurol B with Triton X-100.

A membrane filtration method was examined concerning the effective collection of iron(III) from a homogeneous aqueous solution with Chromazurol B (CAB), one of the triphenylmethane dyes, as a precipitating reagent in the presence of a non-ionic surfactant, polyethylene glycol mono[4-(1,1,3,3-tetramethylbutyl)phenyl]ether (Triton X-100). A formed blue Fe(III)-CAB complex was collected as a precipitate on a membrane filter by filtration under suction from a homogeneous aqueous solution in the pH range over about 2. The original solution was prepared at a concentration ratio of CAB to Fe(III) of to 10, and that of Triton X-100 to CAB of 10 to 100. It was then adjusted to a pH value of between 1.0 and 6.5. A linear relationship (r = 0.999) was obtained between the initial concentration and the found one of Fe(III) in the range of 2.0 x 10(-5) to 4.0 x 10(-4) mol dm(-3) at a fixed concentration ratio of CAB to Fe(III) of 3 and that of Triton X-100 to CAB of 20. This membrane filtration with CAB and Triton X-100 may be utilized for the separation of Fe(III) as a background species.     

InGaAs/InAlAs Five Layer Asymmetric Coupled Quantum Well (FACQW) for Ultra-Wideband Ultrafast Optical Modulators

An InGaAs/InAlAs five-layer asymmetric coupled quantum well (FACQW) is expected to show very large electrorefractive index change. n in a wideband transparency region. Band structures of the FACQW are analyzed with Luttinger-Kohn Hamiltonian. The electrorefractive characteristics of the FACQW are discussed.     

Pressure and temperature effects on the excess deuteron and proton conductance

The limiting molar conductances ° of deuterium chloride DCl in D₂O were determined as a function of pressure and temperature in order to examine the proton-jump mechanism in detail. The excess deuteron conductances °_E(D ⁺), as estimated by the equation [°_E(D ⁺) = °(DCl/D ₂ O) – °(KCl/D ₂ O)], increases with an increase in the pressure and temperature as well as the excess proton conductance [°_E(H ⁺) = °(HCl/H ₂ O) – °(KCl/H ₂ O)]. The isotope effect on the excess conductances, however, depends on the pressure and temperature contrary to the model proposed by Conway et al.: °_E(H ⁺)/°_E(D ⁺) decreases with increasing pressure and temperature. The magnitude of the decrease with pressure becomes more prominent at lower temperature. These results are discussed in terms of the pre-rotation of adjacent water molecules, the bending of hydrogen bonds with pressure, and the difference in strength of hydrogen bonds between D₂O and H₂O.     

Electrical conducting and magnetic properties of (ethylenedithiotetrathiafulvalenothioquinone-1,3-diselenolemethide)2.FeBr4 (GaBr4) crystals with two different interlayer arrangements of donor molecules

Two donor molecules newly synthesized, dimethylthio- and ethylenedithio-tetrathiafulvalenothioquinone-1,3-diselenolemethides (1 and 2), were used to prepare their charge-transfer (CT) salts with a magnetic FeBr(4)(-) counteranion. For 1, a low electrical conducting 1:1 salt (1.FeBr(4)) was obtained, in which molecules of 1 are tightly dimerized in a one-dimensional (1D) stacking column. On the other hand, 2 gave a 2:1 salt (2(2).FeBr(4)) as two different kinds of plate crystals (I and II). Both I and II possess similar stacking structures of molecules of 2 in each 1D column with a half-cut pipelike structure along the c axis. However, for I, the stacking columns are aligned in the same direction along the a and b axes, while for II they are in the same direction along the a axis, but in the reverse direction along the b axis, resulting in the difference in the relative arrangement of molecules of 2 and FeBr(4)(-) ions between the two crystals. The room-temperature electrical conductivities of the single crystals of I and II were 13.6 and 12.7 S cm(-)(1), respectively. The electrical conducting behavior in I was metallic above 170 K but changed to be semiconducting with a very small activation energy of 7.0 meV in the temperature range 4-170 K. In contrast, II showed the semiconducting behavior in the whole temperature range 77-285 K. The corresponding nonmagnetic GaBr(4)(-) salts with almost the same crystal structure as I and II showed definitively different electrical conducting properties in the metal to semiconductor transition temperature in I as well as in the magnitude of activation energy in the semiconducting region of I and II. The interaction between the d spins of FeBr(4)(-) ions was weak and antiferromagnetic in both I and II, but the magnitude of the spin interaction was unexpectedly larger compared with that in the FeBr(4)(-) salt of the corresponding sulfur derivative of 2 with closer contact between the neighboring FeBr(4)(-) ions. These electrical conducting and magnetic results suggest a significant interaction between the conducting pi electrons and the d spins of FeBr(4)(-) ions located near the columns or layers.     

A novel synthesis of (+)-biotin from L-cysteine

(+)-Biotin (1) was synthesized in 25% overall yield over 11 steps from L-cysteine. The contiguous asymmetric centers at C-3a and C-6a were formed through a novel and highly stereoselective Lewis base-catalyzed cyanosilylation of alpha-amino aldehyde 3 to provide anti-O-TMS-cyanohydrin 4 with high stereoselectivity and in high yield (anti/syn = 92:8, 96%). Treatment of 4 with a di-Grignard reagent, 1,4-bis(bromomagnesio)butane, followed by carbon dioxide, efficiently installed the 4-carboxybutyl chain at C-4 to give keto acid 5. The final cyclization to bicyclic compound 7b, a precursor to 1, was realized by a palladium-catalyzed intramolecular allylic amination of cis-allylic carbonate 6b that was elaborated from 5.     

Preparation of zein microspheres conjugated with antitumor drugs available for selective cancer chemotherapy and development of a simple colorimetric determination of drugs in microspheres

Zein microspheres conjugated with antitumor drugs (mitomycinc (MMC), daunomycin hydrochloride (DM), peplomycin sulfate (PEP] were prepared by using a dimethyl sulfoxide (DMSO)-H2O system. MMC with low solubility in H2O was easily entrapped by the standard procedure, whereas some modifications were required for moderately and highly soluble drugs such as DM and PEP. Colorimetric determination of the drugs in microspheres was easily achieved by use of the phenol-sulfuric acid method for drugs with sugar moieties in their molecules, such as DM and PEP, while a simple treatment of the microspheres with concentrated sulfuric acid was applied in the case of drugs having a chromophore in their molecules, such as DM and MMC.     

Synthesis and properties of 7,7-bis(heteroazulen-3-yl)-8,8-dicyano-1,4-quinodimethanes

The synthesis and properties of a novel type of 7,7-bis(heteroazulen-3-yl)-8,8-dicyano-1,4-quinodimethanes (9a-c) are studied. The synthetic method is based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes with 4-(dicyanomethyl)benzaldehyde to afford the corresponding methane derivatives, followed by oxidative hydrogen abstraction with DDQ. The polarization of 9a-c is evaluated by the inspection of their ¹³C NMR and IR spectra. Based on the investigation of the UV-Vis spectra of 9a-c and protonated cations 10a-c, conformational changes of the heteroazulene-moiety and (dicyanomethyl)phenyl group are suggested. In the CV measurements of 9a-c, two reversible reduction waves are observed, indicating the stabilizing ability of heteroazulenes toward the corresponding radical and anion species. Furthermore, 9a-c exhibit two irreversible oxidation waves, which suggest a conformational change in the radical cation during the redox process. The conformational change is rationalized on the basis of the MO calculations.