Ultrahigh‐molecular‐weight‐polyethylene‐fiber surface treatment by electron‐beam‐irradiation‐induced graft polymerization and its effect on adhesion in a styrene–butadiene rubber matrix

Aiming to develop a high‐performance fiber‐reinforced rubber from styrene–butadiene rubber (SBR), we applied a special technique using electron‐beam (EB)‐irradiation‐induced graft polymerization to ultrahigh‐molecular‐weight‐polyethylene (UHMWPE) fibers. The molecular interaction between the grafted UHMWPE fibers and an SBR matrix was studied through the evaluation of the adhesive behavior of the fibers in the SBR matrix. Although UHMWPE was chemically inert, two monomers, styrene and N‐vinyl formamide (NVF), were examined for graft polymerization onto the UHMWPE fiber surface. Styrene was not effective, but NVF was graft‐polymerized onto the UHMWPE fibers with this special method. A methanol/water mixture and dioxane were used as solvents for NVF, and the effects of the solvents on the grafting percentage of NVF were also examined. The methanol/water mixture was more effective. A grafting percentage of 16.4% was the highest obtained. This improved the adhesive force threefold with respect to that of untreated UHMWPE fibers. These results demonstrated that EB irradiation enabled graft polymerization to occur even on the inert surface of UHMWPE fibers. However, the mechanical properties of the fibers could be compromised according to the dose of EB irradiation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2595–2603, 2004     

Effect of core-shell micelle formation on the redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide)

Redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide) (PT-EGE_n-b-EO_m) are reversibly changed by core-shell micelle formation. In the temperature range higher than the critical micellization temperature (cmt), the anodic potential of PT group positively shifts and concomitantly its anodic current decrease, or levels off compared to those of the reference polymer PT-EO_m without the thermo-responsive EGE_n segment. The former alteration is caused by incorporation of hydrophobic PT groups into a core of the micelle and the latter by the decrease in the diffusion coefficient of PT groups due to formation of the core-shell micelles. The cmt value and the temperature-dependent alteration in the redox properties strongly depend on the polymer structure, especially the length of thermo-responsive EGE_n segment. The electrochemically determined hydrodynamic radii of the polymer aggregates seem to be overestimated, compared to the values reported for the aggregates of other thermo-responsive polymers with similar molecular weights, implying the presence of electrochemically inactive PT groups in the copolymers having longer thermo-responsive segments.     

Permeability,permselectivity, and penetrant‐induced plasticization in fluorinated polyimides studied by positron lifetime measurements

The ortho‐positronium (o‐Ps) lifetime τ₃ and its intensity I₃ in various fluorinated polyimides were determined by the positron annihilation technique and were studied with the spin–lattice relaxation time T₁ and the propylene permeability, solubility, diffusivity, and permselectivity for propylene/propane in them. τ₃, I₃, and the distribution of τ₃ changed when the bulky moieties in the polyimides were changed. The polyimides, having both large τ₃ and I₃ values, exhibited a short T₁ and a high permeability with a low permselectivity. The propylene permeability and diffusivity were exponentially correlated with the product of I₃ and the average free‐volume hole size estimated from τ₃. In highly plasticized states induced by the sorption of propylene, the permeability increased with the propylene pressure in excellent agreement with the change in the free‐volume hole properties probed by o‐Ps. The large and broad distribution of the free‐volume holes and increased local chain mobility for the 2,2‐bis(3,4‐decarboxyphenyl) hexafluoropropane dianhydride‐based polyimides are thought to be important physical properties for promoting penetrant‐induced plasticization. These results suggest that o‐Ps is a powerful probe of not only the free‐volume holes but also the corresponding permeation mechanism and penetrant‐induced plasticization phenomenon. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 308–318, 2003     

Synthesis and evaluation of 1-arylsulfonyl-3-piperazinone derivatives as factor Xa inhibitor

Intravascular clot formation is an important factor in a number of cardiovascular diseases. Therefore, the prevention of blood coagulation has become a major target for new therapeutic agents. One attractive approach is the inhibition of factor Xa (FXa), which is a key enzyme in coagulation cascade responsible for the generation of thrombin by limited proteolysis of its zymogen, prothrombin. We have investigated 1-arylsulfonyl-3-piperazinone derivatives, containing a 4-(piperidino)pyridine group in place of guanidino and/or amidino groups, and discovered compound M55113 (30a: 4-[(6-Chloro-2-naphthalenyl)sulfonyl]-1-[[1-(4-pyridinyl)-4-piperidinyl]methyl]piperazinone), as a potent inhibitor of FXa (IC50=0.06 microM) with high selectivity for FXa over trypsin and thrombin.     

Effect of extracts of Zingiberaceae herbs on gastric secretion in rabbits

Some of the Zingiberaceae herbs are known to be useful as stomachics. Water extracts and methanol extracts of eight such herbs were examined in intact unanesthetized rabbits for their effect on gastric secretion. Oral administration of either water extracts or methanol extracts caused a significant decrease in gastric secretion. A significant effect of these extracts appeared at 3 h after administration. The effect of water extracts on gastric secretion was very similar to that of cimetidine, with a significant decrease in acid output. The effect of the methanol extracts was primarily observed as decreased pepsin output.     

A study of embolizing materials for chemo-embolization therapy of hepatocellular carcinoma: embolic effect of cisplatin albumin microspheres using chitin and chitosan in dogs, and changes of cisplatin content in blood and tissue.

Hepatic artery of dogs was embolized with cisplatin (CDDP) albumin microspheres containing chitin and chitosan to investigate the in vivo CDDP release kinetics from CDDP albumin microspheres, the CDDP cumulative characteristics in the liver, and the influence of microsphere administration on hepatic tissue. Results showed that changes in blood CDDP content were dependent on CDDP albumin microsphere type and that release kinetics were better sustained when chitin was added to the microspheres or when the microspheres were treated with chitosan. In particular, the administration of CDDP in the chitin-containing CDDP chitosan albumin microspheres showed a blood CDDP content of approximately 0.26 micrograms Pt/ml 14 d after administration. The administration of chitin-containing or chitosan treated CDDP microspheres showed a CDDP content in the hepatic tissue of 0.14 to 0.23 micrograms Pt/g 28 d after administration. They also showed better control of CDDP release than those without chitin or chitosan treatment. No CDDP influence on hepatic tissue was observed. We conclude that, even in vivo, chitin and chitosan are effective embolic materials.