The canalicular structure of compact bone in the rat at different ages.

Osteocytes communicate through a canalicular system that maintains the vitality and mineral metabolism of bone. Casting the vascular canals and canaliculi of compact bone with methacrylate and viewing them with scanning electron microscopy shows their extent and relationships. Confocal laser scanning microscopy of the same specimen before corrosion establishes the degree of calcification of the different tissue components. These methods were used to compare basal with alveolar compact bone in the rat mandible at different ages. Sections of the mandibular molar region were placed in a methacrylate resin. After polymerization and study with confocal microscopy, the organic matrix was removed. Juvenile rats had large irregular central vascular canals and lacunae that were more concentric in the basal than the alveolar bone. Cast lacunae were round, and the canaliculi from these lacunae were short and thick in both bones. Adult rats had regular concentrically arranged lacunae in the basal bone. Cast lacunae were ellipsoid and flatter in the basal bone than in the alveolar bone. The intercommunicating canaliculi were increased and canaliculi had more branching than the juvenile rats. The aged rats had fewer vascular canals, lacunae, and canaliculi and had osteoporotic changes. The cast lacunae were slender and flat especially in the basal bone. The porosity of the mandible became more pronounced in the alveolar than in the basal bone with aging. The canaliculi of mandibular compact bone thinned and developed extensive branching with adulthood but decreased in size and number with advanced age. Lacunae proceed from the large circular structures of youth to the flat forms of the aged. These studies show that the internal structure of compact bone changes with age and mirrors its functional state.     

Dielectric behavior of polyethyleneoxide (polyox)

Ohne Zusammenfassung     

Evolution of water vapor from indium-tin-oxide transparent conducting films fabricated by dip coating process

Tin-doped indium oxide In₂O₃ (indium-tin-oxide) transparent conducting films were fabricated on silicon substrates by a dip coating process. The thermal analysis of the ITO films was executed by temperature-programmed desorption (TPD) or thermal desorption spectroscopy (TDS) in high vacuum. Gas evolution from the ITO film mainly consisted of water vapor. The total amount of evolved water vapor increased on increasing the film thickness from approx. 25 to 250 nm and decreased by increasing the preparation temperature from 365 to 600°C and by annealing at the same temperature for extra 10 h. The evolution occurred via two steps; the peak temperatures for 250 nm thick films were approx. 100-120 and 205-215°C. The 25 nm thick films evolved water vapor at much higher temperatures; a shoulder at approx. 150-165°C and a peak at approx. 242°C were observed. The evolution temperatures increased by increasing the preparation and the annealing temperatures except in case of the second peak of the 25 nm thick films. The evolution of water vapor at high temperature was tentatively attributed to thermal decomposition of indium hydroxide, In(OH)₃, formed on the surface of the nm-sized ITO particles. This revised version was published online in August 2006 with corrections to the Cover Date.     

Homogeneous palladium catalyst suppressing Pd black formation in air oxidation of alcohols

In homogeneous catalyst systems, there is the persistent problem that metal aggregation and precipitation cause catalyst decomposition and considerable loss of catalytic activity. Pd black formation is a typical example. Pd catalysts are known to easily aggregate and form Pd black, although they realize a wide variety of useful reactions in organic synthesis. In order to overcome this intrinsic problem of homogeneous Pd catalysis, we explored a new class of Pd catalyst by adopting aerobic oxidation of alcohols as a probe reaction. Herein we report a new catalyst system that suppresses the Pd black formation even under air and with a high substrate to catalyst molar ratio (S/C: more than 1000) in oxidation of alcohols. The novel pyridine derivatives having a 2,3,4,5-tetraphenylphenyl substituent and its higher dendritic unit at the 3-position of the pyridine ring were found to be excellent ligands with Pd(OAc)2 in the palladium-catalyzed air (balloon) oxidation of alcohols in toluene at 80 degrees C. Comparison with structurally related pyridine ligands revealed that introduction of the 2,3,4,5-tetraphenylphenyl substituent at the 3-position of pyridine ring effectively suppresses the Pd black formation, maintaining the catalytic activity for a long time to give aldehydes or ketones as products in high yields.     

Bound site of Mo atoms and its local structure in a Mo/HY catalyst characterized by extended X-ray absorption fine structure and density functional calculation

The bound site of Mo atoms and its local structure in a Mo/HY catalyst have been determined by detailed analysis of extended X-ray absorption fine structure (EXAFS). Molybdenum was introduced in the supercage of HY zeolite by cycles of saturated adsorption of Mo(CO)6 at room temperature and subsequent thermal decomposition at 573 K. Two Mo atoms per supercage were immobilized in each CVD-thermal treatment cycle. The Mo loading increased linearly with the cycles up to three cycles at saturation, where six Mo atoms were supported. Temperature-programmed decomposition of the adsorbed Mo(CO)6 was also characterized by GC, QMS, and FT-IR, respectively. The EXAFS analysis including multiple scattering based on theoretical calculations revealed that Mo bound with two oxygen atoms connects to Al, where one of the two oxygen atoms had been associated with a proton. The bound site is called the S(III)' site. The zeolite framework was significantly distorted by the introduction of low-valent Mo, resulting in isolation of the [MoO2Al] unit from the surrounding zeolite framework due to a quasi-disruption of Si-O bonds adjacent to the unit. In the mild oxidation of the low-valent Mo/HY sample two Mo=O bonds were newly formed and the position of Mo was displaced by 0.06 nm so that the distortion of zeolite framework around the Al atom was relieved. The structures were also supported by DFT calculations. This study is the first example that the position of metal cation in zeolite was determined unambiguously by the EXAFS analysis.     

Design and synthesis of highly sensitive and selective fluorescein-derived magnesium fluorescent probes and application to intracellular 3D Mg2+ imaging

The role of intracellular magnesium ions is of high interest in the fields of pharmacology and cellular biology. To accomplish the dynamic and three-dimensional imaging of intracellular Mg2+, there is a strong desire for the development of optimized Mg2+ fluorescent probes. In this paper we describe the design, synthesis, and cellular application of the three novel Mg2+ fluorescent probes KMG-101, -103, and -104. The compounds of this series feature a charged beta-diketone as a binding site specific for Mg2+ and a fluorescein residue as the fluorophore that can be excited with an Ar+ laser such as is widely used in confocal scanning microscopy. This molecular design leads to an intensive off-on-type fluorescent response toward Mg2+ ions. The two fluorescent probes KMG-103 and -104 showed suitable dissociation constants (Kd,Mg2+ = 2 mM) and nearly a 10-fold fluorescence enhancement over the intracellular magnesium ion concentration range (0.1-6 mM), allowing high-contrast, sensitive, and selective Mg2+ measurements. For intracellular applications, the membrane-permeable probe KMG-104AM was synthesized and successfully incorporated into PC12 cells. Upon application of the mitochondria uncoupler FCCP to the probe-incorporated cells, the resulting increase in the free magnesium ion concentration could be followed over time. By using a confocal microscope, the intracellular 3D magnesium ion concentration distributions were satisfactorily observed.     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.     

Asymmetric synthesis of the hydronaphthalene moieties of mevinic acids

The hydronaphthalene moieties of mevinic acids are synthesized enantioselectively by using the asymmetric intramolecular Diels-Alder reaction catalyzed by a chiral titanium reagent.     

The role of carbon dioxide in chemoselective hydrogenation of halonitroaromatics over supported noble metal catalysts in supercritical carbon dioxide

Chemoselective hydrogenation of halogenated nitrobenzenes over Pt/C catalysts proceeds effectively in supercritical carbon dioxide (scCO2) to produce halogenated anilines with excellent selectivity; the rate of the hydrogenation of nitro groups is markedly enhanced in scCO2 compared to the neat reaction, and the dehalogenation reaction is significantly suppressed.