Novel UV‐induced photografting process for preparing poly(tetrafluoroethylene)‐based proton‐conducting membranes

A novel process comprising the UV‐induced photografting of styrene into poly(tetrafluoroethylene) (PTFE) films and subsequent sulfonation has been developed for preparing proton‐conducting membranes. Although under UV irradiation the initial radicals were mainly generated on the surface of the PTFE films by the action of photosensitizers such as xanthone and benzoyl peroxide, the graft chains were readily propagated into the PTFE films. The sulfonation of the grafted films was performed in a chlorosulfonic acid solution. Fourier transform infrared and scanning electron microscopy were used to characterize the grafted and sulfonated membranes. With a view to use in fuel cells, the proton conductivity, water uptake, and mechanical properties of the prepared membranes were measured. Even through the degree of grafting was lower than 10%, the proton conductivity in the thickness direction of the newly prepared membranes could reach a value similar to that of a Nafion membrane. In comparison with γ‐ray radiation grafting, UV‐induced photografting is very simple and safe and is less damaging to the membranes because significant degradation of the PTFE main chains can be avoided. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2624–2637, 2007     

Crystallization of Arthrobacter sp. strain 1C N-(1-D-carboxyethyl)-L-norvaline dehydrogenase and its complex with NAD+

The novel NAD+-linked opine dehydrogenase from a soil isolate Arthrobacter sp. strain 1C belongs to an enzyme superfamily whose members exhibit quite diverse substrate specificites. Crystals of this opine dehydrogenase, obtained in the presence or absence of co-factor and substrates, have been shown to diffract to beyond 1.8 ? resolution. X-ray precession photographs have established that the crystals belong to space group P21212, with cell parameters a = 104.9, b = 80.0, c = 45.5 ? and a single subunit in the asymmetric unit. The elucidation of the three-dimensional structure of this enzyme will provide a structural framework for this novel class of dehydrogenases to enable a comparison to be made with other enzyme families and also as the basis for mutagenesis experiments directed towards the production of natural and synthetic opine-type compounds containing two chiral centres.     

Structural determination of carvone, a component of spearmint, by means of gas electron diffraction augmented by theoretical calculations

The molecular structure and conformation of carvone, a compound with a minty odor, were investigated by means of gas electron diffraction supported by theoretical calculations. Electron diffraction patterns were recorded by heating the nozzle up to 128 °C to obtain enough scattering intensity. The infrared spectrum was also measured by using an absorption cell with a path length of 10 m. The obtained molecular scattering intensities were analyzed with the aid of theoretical calculations and infrared spectroscopy. It was revealed that the experimental data are well reproduced by assuming that carvone consists of a mixture of three conformers that have the isopropenyl group in the equatorial position and mutually differ in the torsional angle around the single bond connecting the ring and the isopropenyl group. It was also found that the puckering amplitude of the ring of carvone is close to those of menthol and isomenthol, a minty compound and its nonminty isomer. The determined structural parameters (r_g and ∠_α) of the most abundant conformer of carvone are as follows: 〈r(C-C)〉=1.520(3) Å; 〈r(CC)〉=1.360(5) Å; r(CO)=1.225(5) Å; 〈r(C-H)〉=1.104(4)Å; 〈∠CC-C〉=121.1(5)°; 〈∠C-C-C〉=110.4(5)°; ∠C-CO-C=117.1(14)°; 〈∠C-C-H〉=111.1(13)°. Angle brackets denote average values and parenthesized values are the estimated limits of error (3σ) referring to the last significant digit.     

A new biodegradable polydepsipeptide microsphere for application in drug delivery systems

A sequential polydepsipeptide containing a tripeptide sequence L-alanyl-Lalanyl-ethyl L-glutamyl and an-hydroxy acid L-lactic acid, poly(Ala-Ala-Glu(OEt)-Lac), was synthesized to prepare the microspherical particles by the solvent evaporation process. In this case, the solvents play the most important role for the preparation of polydepsipeptide microspheres and, as an example, when 200 mg of the polydepsipeptide dissolved in 10 ml of 98/2% chloroform/dichloroacetic acid mixture was stirred at 400 rpm and 30 C, the microspherical particles with mean diameter of 58m were formed after pouring into 200 ml of 1% (w/v) poly(vinyl alcohol) solution. 17-Estradiol was incorporated into the particles, and the resulting particles were found to contain 5 mg of drug per 25 mg of the particle. The in vivo release of drug from the microspherical formulation was evaluated by measuring the pharmacological influence on rat prostate. It was found that the sufficient amount of drug, keeping the effective pharmacological influence, is supplied during the first 12-week period, followed by an incomplete supplying of drug intil the implant is perfectly degraded in vivo in the 25th week from the start of implantation.     

Application of intramolecular 1,3-dipolar cyclic addition of azide and olefin; construction of (pyrrolidine-2-ylidene)glycinate and glycinamides

Oxopropyl E-(pyrrolidine-2-ylidene)glycinamide (5c) and allyl E-(pyrrolidine-2-ylidene)glycinate (5d) were effectively synthesized from 2,3,5-tri-O-benzyl-4-O-tert-butyldimethylsilyl(TBDMS)-D-arabinal (7) using intramolecular 1,3-dipolar cyclic reaction of azide and olefin as a key reaction. These results proved this cyclic reaction should be applicable for the synthesis of various (pyrrolidine-2-ylidene)glycinate and glycinamide. In addition, the development of a synthetic route for the precursor of an unsaturated cyclic dehydro amino acid involved in azinomycins (carzinophilin) using relating glycinate, methyl E-(pyrrolidine-2-ylidene)glycinate (5a) was described.     

A [2]rotaxane capped by a cyclodextrin and a guest: formation of supramolecular [2]rotaxane polymer

A [2]rotaxane capped by a beta-cyclodextrin and a 2,4,6-trinitrophenyl group has been prepared by dissolving 6-aminocinnamoyl beta-cyclodextrin in water with 1-adamantane carboxylic acid and complexation with alpha-cyclodextrin followed by the reaction with 2,4,6-trinitrobenzene sulfonic acid sodium salt. The [2]rotaxane has been found to form supramolecular polymers by host-guest interactions.     

Highly (Z)-selective hydrosilylation of terminal alkynes catalyzed by a diphosphinidenecyclobutene-coordinated ruthenium complex: application to the synthesis of (Z,Z)-bis(2-bromoethenyl)arenes

[reaction: see text] Complex 1 bearing a diphosphinidenecyclobutene ligand (DPCB-OMe) catalyzes highly stereoselective hydrosilylation of diethynylarenes with HSiMe2Ph to afford (Z,Z)-bis(2-silylethenyl)arenes. Treatment of the hydrosilylation products with N-bromosuccinimide causes bromodesilylation in a stereospecific manner, giving (Z,Z)-bis(2-bromoethenyl)arenes in high geometrical purity (>98%).     

Enantioselective conjugate additions of organolithiums to BHA enoates mediated by A chiral ligand

The conjugate addition reactions of BHA alkenoates with organolithiums in toluene or toluene-hexane at −78 °C were mediated by the chiral ligands 1 and 2 to give the corresponding 3-substituted alkanoates in high ees and high yields. The two ligands are complementary each other, 1 is effective for phenyl- and vinyllithiums to give the adducts in 64–93% ee, while 2 is effective for butyl- and ethyllithiums to give the adducts in 91–99% ee.     

Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.