Thermal conductivity modeling of nanofluids with ZnO particles by using approaches based on artificial neural network and MARS

Journal of Thermal Analysis and Calorimetry - Nanofluids are attractive alternatives for the current heat transfer fluids due to their remarkably higher thermal conductivity which leads to the...     

An optical fibre pH sensor based on dye doped mesostructured silica

This paper describes the synthesis and optical pH sensing properties of a pH indicator dye activated mesostructured silica coated optical fibre. The pH-sensitive dye bromothymol blue was incorporated into the mesostructure sol precursor and thin films/coatings were used for pH-sensing applications without prior removal of the surfactant. The pH sensitivity range and operating wavelength were analysed by absorption measurements on layer dip-coated on glass slides. The pH sensing properties of coated optical fibre were tested by evanescent wave method. Experiments were carried out by using a series of solutions of known pH. No leaching was observed (except at very high pH) and an excellent reversibility was obtained between pH=2 and 5.     

Spectrofluorimetric determination of guanethidine sulphate,guanfacine hydrochloride,guanoclor sulphate and guanoxan sulphate in tablets and biological fluids,using benzoin

A sensitive and rapid Spectrofluorimetric method for the determination of guanethidine sulphate, guanfacine hydrochloride, guanoclor sulphate and guanoxan sulphate in tablets and spiked human serum and urine samples is described. The method is based on the reaction of monosubstituted guanidino compounds in an aqueous potassium hydroxide solution with benzoin, in the presence of -mercaptoethanol and sodium sulphite. Highly fluorescent derivatives were obtained, with excitation and emission maximum wavelengths around 325 and 430 nm, respectively. In optimal reaction conditions, the linearity ranges were 0.04–0.28 g/ml, with relative standard deviations less than 2%. The method has been successfully applied to the determination of these drugs in tablets. The results are highly correlated with the B.P. method. Chloroform (or for guanoxan dichloromethane) was used to extract the drugs from serum and urine at basic pH, followed by the proposed fluorimetric method. The limit of detection is 0.02 g/ml for the selected drugs.     

Unexpected ring transformation to pyrrolo[3.2-b]pyridine derivatives. Fused azolium salts. 22

2-Arylsulfanyl and 2-benzylsulfanylpyridinium N-arylimides (2) easily prepared from 3-aryltetrazolopyridinium salts (1) with aryl and benzylthiolates, respectively, reacted with various dipolarophiles yielding cycloadducts that underwent transformation to give tetrahydropyrrolo[3,2-b]pyridines (5, 6, and 8) in good yields. A similar rearrangement (formation of 15) was also observed in the case of parent derivatives being unsubstituted in position 2 (12). The abscence of any significant solvent effect, comparison of the sulfur and non-sulfur analogues, as well as the stereoselective nature of the observed ring transformation seem to support a sigmatropic mechanism. Structure elucidation of the products has been carried out by single-crystal X-ray diffraction and (1)H NMR experiments.     

Direct and simultaneous voltammetric analysis of heavy metals in tap water samples at Assiut city: an approach to improve the analysis time for nickel and cobalt determination at mercury film electrode

Tap water samples (Assiut city, lie in the middle north of upper Egypt, approx. 370 km from Cairo, January-March, 2002) were taken from the eight sampling sites of different locations at Assiut city. The samples are analyzed to determine the total content of cadmium, copper, lead and zinc by differential pulse anodic stripping voltammetry (DPASV) while nickel and cobalt are determined by a new simple differential pulse adsorptive stripping voltammetry (DPAdSV), using dimethylglyoxime (DMG) as the complexing agent. This method uses sodium sulfite as the supporting electrolyte, which facilitates the removal of oxygen interference without the traditional necessity of purging with inert gas. The effect of various parameters was studied using DPASV (for Cd, Pb, Cu and Zn) and AdSV (for Ni and Co) methods. Subsequently, under the so found experimental conditions, the stability of calibration curves and the detection limits (μg/l) have been determined. The data achieved (for all metals utility) are comparable to those measured by the graphite furnace atomic absorption spectrophotometric (GF-AAS) method. The effects of the interferences between these metal ions have been investigated. Moreover, the effect of storage was discussed and the obtained results were compared favorably with standard official methods. Statistical analysis of the database exhibits applicability and the accuracy of the techniques. The results obtained from the two techniques (Voltammetry and GF-AAS) are in very good agreements in the most tap water samples.     

In situ assembled ZIF superstructures via an emulsion-free soft-templating approach

Assembling well-defined MOF superstructures remains challenging as it requires easily removable hard templates or readily available immiscible solutions for an emulsion-based soft-template approach. In this work, a single-step emulsion-free soft templating approach is reported to spontaneously prepare hollow ZIF-8 and ZIF-67 colloidosomes with no further purification. These superstructures can load different enzymes regardless of the size and charge with a high encapsulation efficiency of 99%. We envisage that this work will expand the repertoires of MOF superstructures by the judicious selection of precursors and the reaction medium.

An emulsion-free approach for the preparation of hollow ZIF-8 superstructures in a single step is established based on metal sulfate hydrates in methanol.     

Growth properties of the q-Dunkl transform in the space $$L^{p}_{q,\alpha }({\mathbb {R}}_{q},|x|^{2\alpha +1}d_{q}x)$$ L q , α p ( R q , | x | 2 α + 1 d q x )

The Ramanujan Journal - Our aim in this work is to prove an analogue of Titchmarsh’s theorem [19, Theorem 84] and Younis’s theorem [20, Theorem 3.3] on the image under the q-Dunkl...     

Synthesis of thienothiazocinoisoindolediones and thienothiazinoisoindolones from mercaptothiophenes and chloromethylphthalimide

2-Thienylthiomethylphthalimides 3a,b were synthesized by action of Chloromethylphthalimide on 2-or 3-mercaptothiophene. Reduction of 3a,b and Wittig reaction using carbethoxycarbonyltriphenyl-phosphorane gave the corresponding acetic acids 5a,b which cyclized under Friedel and Crafts conditions to lead the thienothiazocinoisoindolediones 6a,b. Thienothiazinoisoindolones 7a,b were obtained from hydroxyisoindolones derivatives 4a,b in acid conditions via an acyliminium ion.     

The determination of selenium concentration in blood and tumour tissues of breast cancer patients in Syria using instrumental neutron activation analysis

The aim of this study was to investigate the relationship of selenium concentration in blood components and tumour tissues of breast cancer patients and healthy volunteers (control), in Syria, using instrumental neutron activation analysis (INAA). Red blood cells and serum selenium concentrations were determined in 50 healthy volunteers aged 25-70 years and 70 breast cancer patients aged 25-84 years. Selenium levels were also measured in malignant and adjacent normal tissues from breast cancer patients. The accuracy of the analysis was evaluated by co-analyses of international reference materials. The results showed that selenium concentration in serum and RBC was significantly lower among breast cancer patients compared to healthy volunteers (P<0.001). The results also showed that the selenium concentration was significantly higher in the cancer tissues compared to adjacent normal tissues (P<0.001). We conclude that there is a good indication for selenium deviation in blood and malignant tissue of breast cancer patients compared to that of healthy volunteers. This revised version was published online in July 2006 with corrections to the Cover Date.     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.