Synthesis, crystal structures, and electronic properties of nonlinear fused thienoacene semiconductors

Two fused thienoacene compounds with two-dimensional ring connectivity were synthesized, and their semiconducting properties were characterized. Both compounds have a crystal structure comprised of herringbone arrays of tight π-π stacks. Strong π-π interactions lead to self-assembly into well-defined crystalline thin films from the vapor phase for both compounds. Field effect transistors were fabricated, affording identical hole mobilities of 3.0 × 10(-3) cm(2)/(V s) and I(on/off) > 10(5).     

Polar,functionalized diene‐based material. III. Free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadienes

The bulk free‐radical polymerization of 2‐[(N,N‐dialkylamino)methyl]‐1,3‐butadiene with methyl, ethyl, and n‐propyl substituents was studied. The monomers were synthesized via substitution reactions of 2‐bromomethyl‐1,3‐butadiene with the corresponding dialkylamines. For each monomer the effects of the polymerization initiator, initiator concentration, and reaction temperature on the final polymer structure, molecular weight, and glass‐transition temperature (T_g) were examined. Using 2,2′‐azobisisobutyronitrile as the initiator at 75 °C, the resulting polymers displayed a majority of 1,4 microstructures. As the temperature was increased to 100 and 125 °C using t‐butylperacetate and t‐butylhydroperoxide, the percentage of the 3,4 microstructure increased. Differential scanning calorimetry indicated that all of the T_g values were lower than room temperature. The T_g values were higher when the majority of the polymer structure was 1,4 and decreased as the percentage of the 3,4 microstructure increased. The Diels–Alder side products found in the polymer samples were characterized using NMR and gas chromatography‐mass spectrometry methods. The polymerization temperature and initiator concentration were identified as the key factors that influenced the Diels–Alder dimer yield. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4070–4080, 2000     

Polar,functionalized diene‐based materials. V. Free‐radical polymerization of 2‐[(N‐benzyl‐n‐methylamino)methyl]‐1,3‐butadiene and copolymerization with styrene

2‐[(N‐Benzyl‐N‐methylamino)methyl]‐1,3‐butadiene (BMAMBD), the first asymmetric tertiary amino‐containing diene‐based monomer, was synthesized by sulfone chemistry and a nickel‐catalyzed Grignard coupling reaction in high purity and good yield. The bulk and solution free‐radical polymerizations of this monomer were studied. Traditional bulk free‐radical polymerization kinetics were observed, giving polymers with 〈M_n〉 values of 21 × 10³ to 48 × 10³ g/mol (where M_n is the number‐average molecular weight) and polydispersity indices near 1.5. In solution polymerization, polymers with higher molecular weights were obtained in cyclohexane than in tetrahydrofuran (THF) because of the higher chain transfer to the solvent. The chain‐transfer constants calculated for cyclohexane and THF were 1.97 × 10^?3 and 5.77 × 10^?3, respectively. To further tailor polymer properties, we also completed copolymerization studies with styrene. Kinetic studies showed that BMAMBD incorporated into the polymer chain at a faster rate than styrene. With the Mayo–Lewis equation, the monomer reactivity ratios of BMAMBD and styrene at 75 °C were determined to be 2.6 ± 0.3 and 0.28 ± 0.02, respectively. Altering the composition of BMAMBD in the copolymer from 17 to 93% caused the glass‐transition temperature of the resulting copolymer to decrease from 64 to ?7 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3227–3238, 2001     

Synthesis of poly(p‐phenylene) macromonomers and multiblock copolymers

Rigid‐rod poly(4′‐methyl‐2,5‐benzophenone) macromonomers were synthesized by Ni(0) catalytic coupling of 2,5‐dichloro‐4′‐methylbenzophenone and end‐capping agent 4‐chloro‐4′‐fluorobenzophenone. The macromonomers produced were labile to nucleophilic aromatic substitution. The molecular weight of poly(4′‐methyl‐2,5‐benzophenone) was controlled by varying the amount of the end‐capping agent in the reaction mixture. Glass‐transition temperatures of the macromonomers increased with increasing molecular weight and ranged from 117 to 213 °C. Substitution of the macromonomer end groups was determined to be nearly quantitative by ¹H NMR and gel permeation chromatography. The polymerization of a poly(4′‐methyl‐2,5‐benzophenone) macromonomer [number‐average molecular weight (M_n) = 1.90 × 10³ g/mol; polydispersity (M_w)/M_n = 2.04] with hydroxy end‐capped bisphenol A polyaryletherketone (M_n = 4.50 × 10³ g/mol; M_w/M_n = 1.92) afforded an alternating multiblock copolymer (M_n = 1.95 × 10⁴ g/mol; M_w/M_n = 6.02) that formed flexible, transparent films that could be creased without cracking. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3505–3512, 2001     

Bilayer nanocomposite molecular coatings from elastomeric/rigid polymers: fabrication,morphology, and micromechanical properties

We fabricated bilayered nanocomposite coatings composed of a hard polymer layer placed on top of an elastomeric layer. The primary layer of poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS) was attached to the surface by grafting to a chemically reactive silicon surface functionalized with epoxy‐terminated SAM. The SEBS layer served as the compliant interlayer in the bilayered polymer coating. The topmost hard layer was a high performance polymer made of epoxy resin (EP) and an amino functionalized poly(paraphenylene) (PPP). We built the bilayered structure by spincoating the EP/PPP mixture on top of the grafted SEBS layer. The solidification of the topmost layer was initiated at low temperatures (40‐50°C) to avoid dewetting. The curing of the film was finished at 110°C (15 hours) and the EP/PPP layer was strongly attached to the SEBS layer. It was found that the EP/PPP layer did not penetrate inside the elastic primary layer during the solidification. The elastic response of the hard polymer layer was affected significantly by the underlying elastomeric layer. The SEBS layer served as a compliant interlayer capable of dissipating the interfacial stresses originating from dissimilarities in the physical properties between the polymer coating and the inorganic substrate.     

Amorphous linear aliphatic polyesters for the facile preparation of tunable rapidly degrading elastomeric devices and delivery vectors

A versatile method for preparing amorphous degradable elastomers with tunable properties that can be easily fabricated into a wide variety of shape-specific devices was investigated. Completely amorphous, liquid poly(ester ether) prepolymers with number-average molecular weights between 4 and 6 x 10(3) g/mol were prepared via condensation polymerization. These liquid prepolymers were then thermally cross-linked to form degradable elastomeric structures. The ability to vary the composition of these liquid prepolymers allows for easy control of the mechanical and degradation properties of the resulting elastomeric structures. Materials can be designed to completely degrade in vitro over a range of 30 days to 6 months, while the Young's modulus can be varied over 3 orders of magnitude (G = 0.02-20 MPa). Also, the liquid nature of these prepolymers makes them amenable to a wide variety of fabrication techniques. Using traditional and modified imprint lithography techniques, we have fabricated devices that demonstrate a wide variety of biologically applicable topologies, which could easily be extended to fabricate devices with more complex geometries. Until now, no method has combined this ease and speed of fabrication with the ability to control the mechanical and degradation properties of the resulting elastomers over such a broad range.     

Alkyl-substituted poly(2,5-benzophenone)s synthesized via Ni(0)-catalyzed coupling of aromatic dichlorides and their miscible blends

High molecular weight poly(2,5-benzophenone) derivatives were prepared by Ni(0)-catalyzed coupling of 4′-substituted 2,5-dichlorobenzophenones. Monomers were synthesized by the Friedel–Crafts reaction of 2,5-dichlorobenzoyl chloride and alkyl-substituted benzenes in the presence of aluminum chloride. The resulting polymers are soluble and show no evidence of crystallinity by DSC. Number average molecular weights are in the range of 9.2 × 10³–11.7 × 10³ g/mol by multiple angle laser light scattering (MALLS). Molecular weights obtained by MALLS are only slightly lower (∼90%) than those obtained by GPC (polystyrene standards). These polymers exhibit high thermal stability with glass transition temperatures ranging from 173 to 225°C and weight loss occurring above 450°C in nitrogen and 430°C in air. Additionally, the polymers were blended and the resulting polymer films appear to be miscible by DSC results. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2611–2618, 1998     

A series of new high‐performance materials based on poly[4′‐fluorophenyl‐bis(4‐phenyl)phosphine oxide]

A new series of high‐performance poly(arylene phosphine oxide) (PAPO) materials were synthesized postpolymerization from fluorinated poly(arylene phosphine oxide) (f‐PAPO). The new materials had increased solubility and film‐forming ability over the parent f‐PAPO. With the careful choice of the nucleophile, the thermal stability was also increased. The parent polymer f‐PAPO was synthesized via Ni(0) coupling from aromatic chloride and mesylate monomers. Both monomers were polymerized successfully to create polymers with intrinsic viscosities of 0.235 and 0.123 dL/g, respectively. The higher molecular weight f‐PAPO gave a glass transition of 320 °C and a char yield of 54% at 650 °C in air. The substitution of f‐PAPO via nucleophilic aromatic substitution produced PAPO thermoplastics with significant changes in the properties. The largest increase in the thermal stability relative to f‐PAPO was from 563 to 600 °C 10% weight‐loss values in nitrogen after the displacement of fluoride by 4‐aminophenol, which yielded poly[4‐(4‐aminopheonxyphenyl)bis(4′‐phenyl)phosphine oxide]. Additionally, the char yield increased from 54 to 71% in air at 650 °C. The solubility of the parent polymer was improved after substitution with 3‐tert‐butylphenol, n‐nonylamine, and poly(ethylene glycol)monomethyl ether. All of these became soluble in chloroform, N,N‐dimethylacetamide, and dimethyl sulfoxide. Copolymers were synthesized with 2,5‐dichloro‐4′‐fluorobenzophenone to improve the solubility of f‐PAPO without the loss of thermal stability. These copolymers also underwent nucleophilic aromatic substitution to create an epoxy cure agent that was used with the DEN 431 resin. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2277–2287, 2003     

A versatile method for tuning the chemistry and size of nanoscopic features by living free radical polymerization

A novel approach is presented for manipulating the size and chemistry of nanoscopic features using a combination of contact molding and living free radical polymerization. In this approach a highly cross-linked photopolymer, based on a methacrylate/acrylate mixture, was patterned into submicrometer-sized features on a silicon wafer using a contact-molding technique. A critical component of the monomer mixture was the incorporation of an initiator containing monomer into the network structure, which provides sites for functional group amplification. Features ranging in size from 5 microm to <60 nm were accurately replicated by this process and living free radical polymerizations, both atom transfer radical and nitroxide-mediated polymerization (NMP), could be conducted from these initiating sites to yield polymer brushes which represent a grafted layer of linear chains attached to the original network polymer. Grafts consisting of polystyrene, poly(methyl methacrylate), and poly(2-hydroxyethyl)methacrylate were grown with controlled thicknesses ranging from 10 to 143 nm and graft molecular weights of between 18 000 to 290 000 amu. As a result of this secondary graft process, feature sizes could be tuned from the original 100 nm down to 20 nm, and the surface chemistry varied from hydrophilic to hydrophobic starting from the same initial master pattern. The thin films and patterned features were characterized by contact angle, ellipsometry, optical, and atomic force microscopies.     

Surfactant solvation effects and micelle formation in ionic liquids

The formation of micelles in 1-butyl-3-methyl imidazolium chloride (BMIM-Cl) and hexafluorophosphate (BMIM-PF6) were explored using different surfactants and the solvation behavior of the new micellar-ionic liquid solutions examined using inverse gas chromatography.