Ratiometric Detection of microRNA Using Hybridization Chain Reaction and Fluorogenic Silver Nanoclusters

miRNA (miR)-155 is a potential biomarker for breast cancers. We aimed at developing a nanosensor for miR-155 detection by integrating hybridization chain reaction (HCR) and silver nanoclusters (AgNCs). HCR serves as an enzyme-free and isothermal amplification method, whereas AgNCs provide a built-in fluorogenic detection probe that could simplify the downstream analysis. The two components were integrated by adding a nucleation sequence of AgNCs to the hairpin of HCR. The working principle was based on the influence of microenvironment towards the hosted AgNCs, whereby unfolding of hairpin upon HCR has manipulated the distance between the hosted AgNCs and cytosine-rich toehold region of hairpin. As such, the dominant emission of AgNCs changed from red to yellow in the absence and presence of miR-155, enabling a ratiometric measurement of miR with high sensitivity. The limit of detection (LOD) of our HCR-AgNCs nanosensor is 1.13 fM in buffered solution. We have also tested the assay in diluted serum samples, with comparable LOD of 1.58 fM obtained. This shows the great promise of our HCR-AgNCs nanosensor for clinical application.     

Additive Hermitian idempotent preservers between operator algebras

Let L be an additive map between (real or complex) matrix algebras sending $n\times n$ Hermitian idempotent matrices to $m\times m$ Hermitian idempotent matrices. We show that there are nonnegative integers $p,q$ with $n(p+q)=r\le m$ and an $m\times m$ unitary matrix U such that$L(A)=U[(I_p?A)\oplus (I_q?A^t)\oplus 0_{m?r}]U^{?},\text{for any}n\times n\text{Hermitian}A\text{with rational trace}.$ We also extend this result to the (complex) von Neumann algebra setting, and provide a supplement to the Dye-Bunce-Wright Theorem asserting that every additive map of Hermitian idempotents extends to a Jordan ?-homomorphism.     

Beryllium coordination chemistry

The coordination chemistry of beryllium with particular emphasis on chelates under physiological or near physiological conditions is surveyed. Hard donors such as oxygen are emphasized; equilibrium data and formation constants are reported as an indication of the strength of the complex.     

A study of structural, compositional and optical properties of spray-deposited non-stoichiometric (Zn,Fe)S thin films

Non-stoichiometric ternary chalcogenides (Zn,Fe)S were prepared in the film form by pyrolytic spray deposition technique, using air/nitrogen as the carrier gas. The precursor solution comprised of ZnCl₂, FeCl₂ and thiourea. The depositions were carried out under optimum conditions of experimental parameters viz. carrier gas (air/nitrogen) flow rate, concentration of precursor constituents, nozzle substrate distance and temperature of quartz substrate. The deposited thin films were later sintered in argon at 1073 K for 120 min.The structural, compositional and optical properties of the sintered thin films were studied. X-ray diffraction studies of the thin films indicated the presence of (Zn,Fe)S solid solution with prominent cubic sphalerite phase while surface morphology as determined by scanning electron microscopy (SEM) revealed a granular structure.The chemical composition of the resulting thin films as analyzed by energy dispersive X-ray analysis (EDAX) reflected the composition of the precursor solutions from which the depositions were carried out with Fe at% values ranging from 0.4 up to 33.SEM micrographs of thin films reveal that the grain sizes of the thin films prepared using air as carrier gas and N₂ as carrier gas are in the vicinity of 300 and 150 nm, respectively.The diffuse transmittance measurements for thin films, as a function of wavelength reveal the dependence of direct optical band gap on Fe content and type of phase.     

A simple electronic speckle shearing interferometer

A new speckle shearing interferometer with simple setup is proposed. The interferometer can be converted easily from a speckle referenced speckle pattern interferometer into a speckle shearing interferometer and vice versa. A beamsplitter and a mirror are used to generate the shear. The amount of shear can be adjusted by simply rotating the mirror. The costs involved are low and it is particularly useful for fast inspection in non-destructive testing of structural integrity. Both the theoretical studies of the method of measurement and the experimental results are presented.     

The orientation-selective growth of LaNiO3 films on Si(100) by pulsed laser deposition using a MgO buffer

Highly (100)-oriented, (110)-oriented and polycrystalline LaNiO₃ (LNO) films were successfully prepared on Si(100) using an oriented MgO film as a buffer. It was somewhat surprising to find that that the orientation relation between the LNO film and the corresponding MgO buffer was: LNO(100)\MgO(110), LNO(110)\MgO(111) and LNO(polycrystalline)\MgO(100). The crystalline quality of the LNO films was shown to be sensitive to the preparation conditions of the MgO buffer. The film surface was very smooth, without micrometer-sized droplets being observed. All LNO films were of metallic conductivity, with a room-temperature resistivities of approximately 250, 280 and 420 μΩ cm for the (110)-oriented, (100)-oriented and polycrystalline LNO, respectively. Received: 2 April 2001 / Accepted: 23 October 2001 / Published online: 3 June 2002     

Equilibrium Problems with Applications to Eigenvalue Problems

In this paper, we consider equilibrium problems and introduce the concept of (S)₊ condition for bifunctions. Existence results for equilibrium problems with the (S)₊ condition are derived. As special cases, we obtain several existence results for the generalized nonlinear variational inequality studied by Ding and Tarafdar (Ref. 1) and the generalized variational inequality studied by Cubiotti and Yao (Ref. 2). Finally, applications to a class of eigenvalue problems are given.     

The benefit of practice for sound localization without sight

An experiment was designed to determine whether normally sighted human subjects would be able to adapt to the handicapping effects of sudden deprivation of visual cues on horizontal plane sound localization. Two groups of sighted normal-hearing young adults participated. One group was allowed the benefit of sight. The other group was blindfolded. Measurements of accuracy and the time to respond were made daily over the course of five consecutive days, in a semi-reverberant sound proof booth that modeled listening in a small office. Sound localization was assessed using an array of eight speakers that surrounded the subject in space. Each day, one block of 120 trials was presented for each of three stimuli, two one-third octave noise bands, centred at 0.5 and 4 kHz, and broadband noise, to assess the utilization of interaural temporal difference cues, interaural level difference cues and binaural and spectral cues in combination. Blindfolded subjects were relatively less accurate than sighted subjects. Both groups showed gains with practice, the blindfolded group to a greater degree, largely due to improvements in the use of spectral cues. The blindfolded group took longer to respond than the sighted group, but showed greater decrements in response time with practice.     

Membrane introduction mass spectrometry

An overview of membrane introduction mass spectrometry (MIMS) is presented and comparisons are made with other direct sample introduction techniques. Special attention is given to the unique advantages and the limitations of newer variants on the MIMS technique, including affinity MIMS, reverse-phase and trap MIMS. The salient features of the interfaces used in MIMS are summarized and the various membrane materials commonly used are delineated. The applicability of MIMS is illustrated via discussion of

1. (i) bioreactor monitoring (represented by yeast fermentation),

2. (ii) environmental monitoring (illustrated by analysis of contaminated ground water samples) and

3. (iii) on-line chemical reaction monitoring (exemplified by the photolysis of aryl esters).

The applicability of MIMS to the analysis of environmental samples, including complex mixtures in water, air and soil, is noted.     

Detecting and Diagnostic Checking Multivariate Conditional Heteroscedastic Time Series Models

Two tests for multivariate conditional heteroscedastic models are proposed. One is based on the cross-correlations of standardized squared residuals and the other is a score (Lagrange multiplier) test. The cross-correlations test can be used to detect the presence of multivariate conditional heteroscedasticity whereas the other test can be used for diagnostic checking. Simulation studies on the size and power of the test statistics are reported. The application of the tests is illustrated by an example using the S & P 500 and Sydney All Ordinary Indexes.