Multiferroic TbMnO3 nanoparticles

We report on the synthesis of TbMnO₃ nanoparticles by chemical co-precipitation route and their structural, chemical bonding, magnetic and dielectric properties. It is shown that the interesting multiferroic properties of this system as reflected by the concurrent occurrence of magnetic and dielectric transitions are retained in the nanoparticles (size∼40 nm). However, the nanoparticle constitution and properties are seen to depend significantly on the calcination temperature. While the nanoparticles obtained by calcination at 800 °C correspond very well with the reported properties of single phase TbMnO₃ (all the key magnetic and dielectric features near 7, 27 and 41 K, albeit with reduced dielectric constant) the nanoparticles obtained by calcination at 900 °C develop a Tb deficient skin which softens the transitions, reducing the dielectric constant further.     

Properties and analytical applications of the heteropolymolybdates of phosphorus, arsenic, silicon and germanium-IV Determination of phosphomolybdic and silicomolybdic acids via the molybdenum content, with phenylfluorone

Procedures are proposed for the determination of phosphorus and silicon in the ppM range, by extraction of phosphomolybdic and silicomolybdic acids with organic solvent, decomposition of the complex and spectrophotometric determination of its molybdenum content.     

L-proline catalyzed asymmetric transfer aldol reaction between diacetone alcohol and aldehydes

We demonstrate for the first time, L-proline as a chiral catalyst for transfer aldol reaction between aldehydes and diacetone alcohol.     

Triiron and Triruthenium Carbonyl Clusters Bearing Bridging Long Chain Diphosphine and Capping Chalcogenido Ligands

Treatment of Ru₃(CO)₁₂ with dpphSe₂ (dpph = 1,6-bis(diphenylphosphino)hexane) in refluxing toluene in the presence of Me₃NO afforded two new compounds, Ru₃(CO)₇(-CO)(₃-Se)(-dpph) (1) and Ru₃(CO)₇(₃-Se)₂(-dpph) (2). A similar reaction of Ru₃(CO)₁₂ with dpppeSe₂ (dpppe = 1,5-bis(diphenylphosphino)pentane) gave exclusively Ru₃(CO)₇(₃-Se)₂(-dpppe) (3). Treatment of Ru₃(CO)₁₂ with dpphS₂ and dpppeS₂ at 110°C in the presence of Me₃NO afforded Ru₃(CO)₇(₃-S)₂(-dpph) (4) and Ru₃(CO)₇(₃-S)₂(-dpppe) (5), respectively. Reactions of Fe₃(CO)₁₂ with dpphSe₂ and dpppeSe₂, under identical conditions, afforded Fe₃(CO)₇(₃-Se)₂(-dpph) (6) and Fe₃(CO)₇(₃-Se)₂(-dpppe) (7), respectively. Compounds 1–7 were characterized spectroscopically and the molecular structures of compounds 1–4 were determined by single crystal X-ray crystallography. The core of 1 contains an equilateral triangle of ruthenium atoms with one capping selenium, one bridging dpph, one doubly bridging carbonyl and seven terminal carbonyl ligands. Complexes 2–4 have a square-pyramidal structure with two metal and two chalcogenide atoms alternating in the basal plane and the third metal atom at the apex of the pyramid, and belong to the family of well-known nido clusters with seven skeletal electron pairs.     

A bound on the Wasserstein-2 distance between linear combinations of independent random variables

We provide a bound on a distance between finitely supported elements and general elements of the unit sphere of ${?}^2\left({\mathbb{N}}^1\right)$. We use this bound to estimate the Wasserstein-2 distance between random variables represented by linear combinations of independent random variables. Our results are expressed in terms of a discrepancy measure related to Nourdin–Peccati’s Malliavin–Stein method. The main application is towards the computation of quantitative rates of convergence to elements of the second Wiener chaos. In particular, we explicit these rates for non-central asymptotic of sequences of quadratic forms and the behavior of the generalized Rosenblatt process at extreme critical exponent.     

Formulation and In Vitro Evaluation of Sustained Release Microspheres of Diltiazem Hydrochloride Prepared by Emulsification-Internal Gelation Method

The present work describes the formulation of alginate microspheres containing diltiazem hydrochloride by the emulsification-internal gelation method with the use of barium carbonate as a cross-linking agent. The effect of various factors (the concentration of alginate and barium chloride) on the drug loading efficiency and in vitro release were investigated. Fourier transform infrared microscopy (FTIR) and differential scanninig calorimetry (DSC) analysis confirmed the absence of any drug polymer interaction. X-ray diffraction (XRD) pattern showed that there is a decrease crystallinity of the drug. The in vitro drug release profile could be altered significantly by changing various processing parameters to give a controlled release of drug from microcapsules. The stability studies of drug-loaded microcapsules showed that the drug was stable at different storage conditions.     

Synthesis of linseed oil based biodegradable homo and copolymers: role as multifunctional greener additives in lube oil

Abstract

Homopolymer of linseed oil and its four copolymers with styrene, 1-decene, isodecyl acrylate and octyl acrylate, respectively, have been synthesized in this present context. The prepared polymers are characterized by NMR and FTIR spectroscopy. The molecular weights have been measured by gel permeation chromatography. Their effectiveness as pour point depressant (PPD), viscosity index improver (VII) and their shear stability in terms of permanent shear stability index have been evaluated in lube oil. The copolymers acted as better PPDs than the homopolymer whereas the homopolymer of linseed oil excelled as VII. Further it was observed that all the prepared polymers were stable enough under severe mechanical shear.     

In vivo estimation of optical properties of rat liver using single-reflectance fiber probe during ischemia and reperfusion

Optical Review - To quantify the changes in optical properties of in vivo rat liver tissue, we applied diffuse reflectance spectroscopy (DRS) system using single-reflectance fiber probe during...     

Evaluation of a novel nanocrystalline hydroxyapatite powder and a solid hydroxyapatite/Chitosan-Gelatin bioceramic for scaffold preparation used as a bone substitute material

Artificially fabricated hydroxyapatite (HAP) shows excellent biocompatibility with various kinds of cells and tissues which makes it an ideal candidate for a bone substitute material. In this study, hydroxyapatite nanoparticles have been prepared by using the wet chemical precipitation method using calcium nitrate tetra-hydrate [Ca(NO₃)₂.4H₂O] and di-ammonium hydrogen phosphate [(NH₄)₂ HPO₄] as precursors. The composite scaffolds have been prepared by a freeze-drying method with hydroxyapatite, chitosan, and gelatin which form a 3D network of interconnected pores. Glutaraldehyde solution has been used in the scaffolds to crosslink the amino groups (|NH₂) of gelatin with the aldehyde groups (|CHO) of chitosan. The X-ray diffraction (XRD) performed on different scaffolds indicates that the incorporation of a certain amount of hydroxyapatite has no influence on the chitosan/gelatin network and at the same time, the organic matrix does not affect the crystallinity of hydroxyapatite. Transmission electron microscope (TEM) images show the needle-like crystal structure of hydroxyapatite nanoparticle. Scanning Electron Microscope (SEM) analysis shows an interconnected porous network in the scaffold where HAP nanoparticles are found to be dispersed in the biopolymer matrix. Fourier transforms infrared spectroscopy (FTIR) confirms the presence of hydroxyl group (OH^-) , phosphate group (PO^3-₄) , carbonate group (CO^2-₃) , imine group (C=N), etc. TGA reveals the thermal stability of the scaffolds. The cytotoxicity of the scaffolds is examined qualitatively by VERO (animal cell) cell and quantitatively by MTTassay. The MTT-assay suggests keeping the weight percentage of glutaraldehyde solution lower than 0.2%. The result found from this study demonstrated that a proper bone replacing scaffold can be made up by controlling the amount of hydroxyapatite, gelatin, and chitosan which will be biocompatible, biodegradable, and biofriendly for any living organism.     

In-vitro drug–drug interaction studies of diltiazem with floroquinolones

Diltiazem is an established cardiovascular drug mainly used for the management of hypertension specifically for the angina pectoris. Fluoroquinolones are widely prescribed against the treatment of severe infections. In vitro relations of diltiazem with fluoroquinolones (ciprofloxacin, levofloxacin, norfloxacin, and ofloxacin) were examined using spectrophotometric and separation techniques, i.e., RP-HPLC. Diltiazem’s availabilities were observed to be predisposed highly in the presence of fluoroquinolones. To investigate the mechanism of interaction in a variety of dissolution environments, i.e., simulating body environments with regard to pH on these interactions has been studied. Moreover, complex of diltiazem–fluoroquinolones were prepared and elucidated through IR spectroscopy and confirmed by computational molecular modeling.