Multiferroic TbMnO3 nanoparticles

We report on the synthesis of TbMnO₃ nanoparticles by chemical co-precipitation route and their structural, chemical bonding, magnetic and dielectric properties. It is shown that the interesting multiferroic properties of this system as reflected by the concurrent occurrence of magnetic and dielectric transitions are retained in the nanoparticles (size∼40 nm). However, the nanoparticle constitution and properties are seen to depend significantly on the calcination temperature. While the nanoparticles obtained by calcination at 800 °C correspond very well with the reported properties of single phase TbMnO₃ (all the key magnetic and dielectric features near 7, 27 and 41 K, albeit with reduced dielectric constant) the nanoparticles obtained by calcination at 900 °C develop a Tb deficient skin which softens the transitions, reducing the dielectric constant further.     

Two (E)‐2‐arylidene‐1,4‐di‐p‐tosyl‐1,2,3,4‐tetrahydroquinoxaline compounds: supramolecular frameworks built with C—H...O and C—H...π(arene) hydrogen bonds and π–π stacking interactions

The pyrazine ring in two N‐substituted quinoxaline derivatives, namely (E)‐2‐(2‐methoxybenzylidene)‐1,4‐di‐p‐tosyl‐1,2,3,4‐tetrahydroquinoxaline, C₃₀H₂₈N₂S₂O₅, (II), and (E)‐methyl 2‐[(1,4‐di‐p‐tosyl‐1,2,3,4‐tetrahydroquinoxalin‐2‐ylidene)methyl]benzoate, C₃₁H₂₈N₂S₂O₆, (III), assumes a half‐chair conformation and is shielded by the terminal tosyl groups. In the molecular packing of the compounds, intermolecular C—H...O hydrogen bonds between centrosymmetrically related molecules generate dimeric rings, viz. R₂²(22) in (II) and R₂²(26) in (III), which are further connected through C—H...π(arene) hydrogen bonds and π–π stacking interactions into novel supramolecular frameworks.     

In vivo estimation of optical properties of rat liver using single-reflectance fiber probe during ischemia and reperfusion

Optical Review - To quantify the changes in optical properties of in vivo rat liver tissue, we applied diffuse reflectance spectroscopy (DRS) system using single-reflectance fiber probe during...     

Evaluation of a novel nanocrystalline hydroxyapatite powder and a solid hydroxyapatite/Chitosan-Gelatin bioceramic for scaffold preparation used as a bone substitute material

Artificially fabricated hydroxyapatite (HAP) shows excellent biocompatibility with various kinds of cells and tissues which makes it an ideal candidate for a bone substitute material. In this study, hydroxyapatite nanoparticles have been prepared by using the wet chemical precipitation method using calcium nitrate tetra-hydrate [Ca(NO₃)₂.4H₂O] and di-ammonium hydrogen phosphate [(NH₄)₂ HPO₄] as precursors. The composite scaffolds have been prepared by a freeze-drying method with hydroxyapatite, chitosan, and gelatin which form a 3D network of interconnected pores. Glutaraldehyde solution has been used in the scaffolds to crosslink the amino groups (|NH₂) of gelatin with the aldehyde groups (|CHO) of chitosan. The X-ray diffraction (XRD) performed on different scaffolds indicates that the incorporation of a certain amount of hydroxyapatite has no influence on the chitosan/gelatin network and at the same time, the organic matrix does not affect the crystallinity of hydroxyapatite. Transmission electron microscope (TEM) images show the needle-like crystal structure of hydroxyapatite nanoparticle. Scanning Electron Microscope (SEM) analysis shows an interconnected porous network in the scaffold where HAP nanoparticles are found to be dispersed in the biopolymer matrix. Fourier transforms infrared spectroscopy (FTIR) confirms the presence of hydroxyl group (OH^-) , phosphate group (PO^3-₄) , carbonate group (CO^2-₃) , imine group (C=N), etc. TGA reveals the thermal stability of the scaffolds. The cytotoxicity of the scaffolds is examined qualitatively by VERO (animal cell) cell and quantitatively by MTTassay. The MTT-assay suggests keeping the weight percentage of glutaraldehyde solution lower than 0.2%. The result found from this study demonstrated that a proper bone replacing scaffold can be made up by controlling the amount of hydroxyapatite, gelatin, and chitosan which will be biocompatible, biodegradable, and biofriendly for any living organism.     

Structural, AC, and DC magnetic properties of Zn1−xCoxFe2O4

Structural, AC and DC magnetic properties of polycrystalline Zn_1−xCo_xFe₂O₄ (x=0.2, 0.4) samples sintered at various temperatures (1100-1300 °C), and various dwell times (0.2-15 h) have been investigated thoroughly. The bulk density of the Zn_0.60Co_0.40Fe₂O₄ samples increases as the sintering temperature (T_s) increases from 1100 to 1250 °C, and above 1250 °C the bulk density decreases slightly. The Zn_0.80Co_0.20Fe₂O₄ samples show similar behavior of changes to that of Zn_0.60Co_0.40Fe₂O₄ samples except that the bulk density is found to be highest at 1200 °C. The DC magnetization as a function of temperature curves show that the Zn_0.60Co_0.40Fe₂O₄ sample is ferrimagnetic at room temperature while the Zn_0.80Co_0.20Fe₂O₄ sample is paramagnetic at room temperature. The T_c of Zn_0.80Co_0.20Fe₂O₄ sample is found to be 170 K from DC magnetization measurement. Separate measurement (AC magnetization), initial permeability as a function of temperature shows that the T_c of the Zn_0.60Co_0.40Fe₂O₄ sample is 353 K. Slight variation of T_c is observed depending on sintering condition. The initial permeability for the Zn_0.60Co_0.40Fe₂O₄ composition sintered at 1250 °C is found to be maximum.     

Efficient synthesis of 1,3,5-trisubstituted benzenes via three Pd-mediated carbon-sulfur, carbon-nitrogen and carbon-carbon bond formation reactions

An efficient synthesis of 1,3,5-trisubstituted benzenes via a sequential Pd-mediated carbon-sulfur, carbon-nitrogen, and carbon-carbon bond formation reactions is reported. Selective amidation and sulfonamidation reactions are accomplished via Pd-catalyzed reactions between aryl chlorides and an acetamide or a methanesulfonamide.     

On results of G. Brosch and T.C. Alzahary

We prove a uniqueness theorem for two non-constant meromorphic functions sharing three values which improves a recent result of T.C. Alzahary. As a consequence of our main result we also improve a theorem of G. Brosch.     

Synthesis and characterization of water-soluble carbon nanotubes from mustard soot

Carbon nanotubes (CNT) has been synthesized by pyrolysing mustard oil using an oil lamp. It was made water-soluble (wsCNT) through oxidative treatment by dilute nitric acid and was characterized by SEM, AFM, XRD, Raman and FTIR spectroscopy. The synthesized wsCNT showed the presence of several junctions and defects in it. The presence of curved graphene structure (sp²) with frequent sp³ hybridized carbon is found to be responsible for the observed defects. These defects along with the presence of di- and tri-podal junctions showed interesting magnetic properties of carbon radicals formed by spin frustration. This trapped carbon radical showed ESR signal in aqueous solution and was very stable even under drastic treatment by strong oxidizing or reducing agents. Oxidative acid treatment of CNT introduced several carboxylic acid group functionalities in wsCNT along with the nicking of the CNT at different lengths with varied molecular weight. To evaluate molecular weights of these wsCNTs, an innovative method like gel electrophoresis using high molecular weight DNA as marker was introduced.     

A new solid phase micro extraction for simultaneous head space extraction of ultra traces of polar and non-polar compounds

The results of the innovative study on a new stationary phase with high efficiency based on ZnO nano and micro rod coating on fused silica are reported in this paper. ZnO nanorods with a diameter in the range of 70–300 nm and the length of about 500 nm, have been grown on fused silica fibers using a hydrothermal process. The extraction properties of the fiber were investigated using headspace solid-phase microextraction (HS-SPME) mode coupled with gas chromatography–mass spectrometry detection (GC–MS) for 1,4-dichloro-nitrobenzene, biphenyl and acenaphthene. The calibration curves were linear up to 10²–10⁷ ng L⁻¹ (R² > 0.995) with detection limits of 10⁻³ ng L⁻¹ for biphenyl and acenaphthene and 10 ng L⁻¹ for 1,4-dichloro-nitrobenzene. The RSD for single fiber and fiber-to-fiber were less than 7.0 and 11.5%, respectively. The high stability of the ZnO coating is proved at relatively high temperatures (up to 300 °C) with a high extraction capacity and long lifespan (more than 100 times). Promising recoveries (91–102%) were obtained in environmental water samples analysis by applying the proposed technique.