Aziridination of alkenes using N-iodo-N-potassio-p-toluenesulphonamide as a nitrene precursor

N-Iodo-N-potassio-p-toluenesulphonamide was found to be a convenient nitrene precursor for the aziridination of alkenes in the presence of copper catalysts.     

Fractional distribution of graphene oxide and its potential as an efficient and reusable solid catalyst for esterification reactions

Graphene oxide (GrO) prepared by the Hummers method was separated into three different fractions (GrO₅₀₀₀, GrO₂₀₀₀, and GrO_res) on the basis of their dispersion stability in the water. Infrared, nuclear magnetic resonance, X‐ray photoelectron spectroscopy, and elemental analyses revealed that GrO₅₀₀₀ possesses a high degree of oxygen functionalities including phenolic, carboxylic, and ?OSO₂H groups, compared with the other fractions. The GrO₅₀₀₀ was found to be a highly efficient and reusable solid catalyst for the esterification of various carboxylic acids with a variety of alcohols to furnish corresponding esters in high to excellent yields. The catalytic activity of the GrO₅₀₀₀ was attributed to the ability of highly polar GrO₅₀₀₀ scaffold to adsorb/attract reactants, where the acid functionalities of GrO₅₀₀₀ facilitated the esterification process efficiently. The chemical and structural features of GrO₅₀₀₀ were discussed to understand the improved catalytic activity compared with GrO₂₀₀₀ and conventional solid acid catalysts. Copyright © 2014 John Wiley & Sons, Ltd.     

Influence of cellulose nanofibers on the curing behavior of epoxy/amine systems

Epoxy composites were prepared using diglycidyl ether bisphenol F and water-dilutable diglycidyl ether bisphenol A with curing agents, polyoxypropylenediamine and diethylmethylbenzenediamine, in water or dimethylformamide as a solvent. The influence of cellulose nanofibers and solvents on curing kinetics of epoxy composites was investigated. Curing kinetic parameters were calculated using the model-fitting methods and the isoconversional method. Among these, the Sestak–Berggren equation best fit the experimental data. Results indicated that dimethylformamide decreased the reaction rate, whereas water revealed the opposite pattern. Cellulose nanofibers catalyzed the reaction between bisphenol F resins and the aromatic curing agent.     

A facile method for the synthesis of large‐size Ag nanoparticles as efficient SERS substrates

Silver nanoparticles (Ag NPs) enjoy a reputation as an ultrasensitive substrate for surface‐enhanced Raman spectroscopy (SERS). However, large‐scale synthesis of Ag NPs in a controlled manner is a challenging task for a long period of time. Here, we reported a simple seed‐mediated method to synthesize Ag NPs with controllable sizes from 50 to 300 nm, which were characterized by scanning electron microscopy (SEM) and UV–Vis spectroscopy. SERS spectra of Rhodamine 6G (R6G) from the as‐prepared Ag NPs substrates indicate that the enhancement capability of Ag NPs varies with different excitation wavelengths. The Ag NPs with average sizes of ~150, ~175, and ~225 nm show the highest SERS activities for 532, 633, and 785‐nm excitation, respectively. Significantly, 150‐nm Ag NPs exhibit an enhancement factor exceeding 10⁸ for pyridine (Py) molecules in electrochemical SERS (EC‐SERS) measurements. Furthermore, finite‐difference time‐domain (FDTD) calculation is employed to explain the size‐dependent SERS activity. Finally, the potential of the as‐prepared SERS substrates is demonstrated with the detection of malachite green. Copyright © 2016 John Wiley & Sons, Ltd.     

Mild Organic Ammonium Tribromide–Mediated Regioselective Ring Opening of Epoxides with Alcohols,Water, Acetic Anhydride,and Amines Under Solvent-Free Reaction Conditions

Organic ammonium tribromide (OATB), N-methylpyrrolidine-2-one hydrotribromide (MPHT) was found to be an efficient catalyst for the regioselective ring opening of epoxides with various nucleophiles under solvent free conditions. This procedure occurs under neutral and mild reaction conditions with out adding any additive and afforded high yields of products.

Highly redispersible sugar beet nanofibers as reinforcement in bionanocomposites

A simple method for preparing redispersible nanofibers from sugar beet residue and their use as a well-dispersed reinforcement for a polyvinyl alcohol (PVA) matrix is reported. It is known that the redispersion of dried cellulose nanofibers is difficult because of the formation of strong hydrogen bonds between the nanofibers. The results show that the properties of the initial sugar beet nanofiber suspension can be recovered without the use of chemical modification or additives with higher pectin and hemicellulose content. Undried and redispersed nanofibers with and without pectin were used as nanocomposite reinforcement with PVA. The redispersed nanofibers were as good reinforcements as the undried nanofibers. The tensile strength and elastic modulus of the nanocomposites with the redispersed sugar beet nanofibers were as good as those of the nanocomposites with undried nanofibers. Interestingly, the nanofiber dispersion in the PVA matrix was better when sugar beet nanofibers containing pectin and hemicellulose were used as reinforcements.     

Influence of Size and Shape on the Photocatalytic Properties of SnO2 Nanocrystals

Tuning the functional properties of nanocrystals is an important issue in nanoscience. Here, we are able to tune the photocatalytic properties of SnO₂ nanocrystals by controlling their size and shape. A structural analysis was carried out by using X‐ray diffraction (XRD)/Rietveld and transmission electron microscopy (TEM). The results reveal that the number of oxygen‐related defects varies upon changing the size and shape of the nanocrystals, which eventually influences their photocatalytic properties. Time‐resolved spectroscopic studies of the carrier relaxation dynamics of the SnO₂ nanocrystals further confirm that the electron–hole recombination process is controlled by oxygen/defect states, which can be tuned by changing the shape and size of the materials. The degradation of dyes (90 %) in the presence of SnO₂ nanoparticles under UV light is comparable to that (88 %) in the presence of standard TiO₂ Degussa P‐25 (P25) powders. The photocatalytic activity of the nanoparticles is significantly higher than those of nanorods and nanospheres because the effective charge separation in the SnO₂ nanoparticles is controlled by defect states leading to enhanced photocatalytic properties. The size‐ and shape‐dependent photocatalytic properties of SnO₂ nanocrystals make these materials interesting candidates for photocatalytic applications.     

An efficient biomaterial supported bifunctional organocatalyst (ES-SO3- C5H5NH+) for the synthesis of β-amino carbonyls

A biomaterial supported organocatalyst, readily synthesized by the reaction of chemically modified sulfonic group containing expanded corn starch with pyridine exhibited excellent catalytic activity for the synthesis of β-amino carbonyls in excellent yields via aza-Michael addition of amines to electron deficient alkenes. A remarkable enhancement in the reaction rates was observed with the prepared bifunctional organocatalyst in comparison to the either starch grafted sulfonic acid or the corresponding homogeneous pyridinium p-toluenesulfonate.     

Charge transport properties of MDMO PPV thin films cast in different solvents

Charge transport properties in thin films of Poly(2‐methoxy‐5‐(3′,7′‐dimethyloctyloxy)‐1,4‐phenylenevinylene) (MDMO PPV) cast using either chloroform (CF), toluene (TOL), or chlorobenzene (CB) as solvent were investigated. Hole mobility (μ) in these thin films measured using time‐of‐flight transient photoconductivity showed an increasing trend with respect to the solvent used in the same order, that is, μ_CF (2.4 × 10^?7 cm²/Vs) < μ_TOL (6.9 × 10^?7 cm²/Vs) < μ_CB (2.3 × 10^?6 cm²/Vs). Observed variations in mobilities were attributed to different morphologies of MDMO PPV chains in thin films cast using the aforesaid solvents. Nature of the interchain interactions and aggregate formation were obtained using photoluminescence (PL), Raman spectroscopy, and AFM studies. Ratio of PL peak intensities of 0–0 and 0–1 transitions, which is a direct measure of interchain interaction, was the highest in CB and lowest in CF. Variation in the relative intensities of out‐of‐plane wagging of vinylene group (～963 cm^?1 mode) in Raman spectra suggested different extent of coiling of polymer chains in these thin films. From these observations, it was elicited that aggregate size and interchain interactions are highest in CB and least in CF. AFM‐based topographic images of thin films further supported these variations in the size of aggregates. Variation in the aggregate sizes and interchain interactions explained the corresponding variation in the mobility. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1431–1439