The electrocatalytic examination of cephalosporins at carbon paste electrode modified with CoSalophen

The electrocatalytic oxidation of cephalexin and cefazolin has been studied at a carbon paste electrode modified with cobalt salophen (CoSal) by cyclic voltammetry. The selectivity of the carbon paste modified with CoSal in detecting cephalexin and cefazolin was examined. To suggest the electrocatalytic mechanism for electro-oxidation of cefazolin, the electrochemical behavior of ceftriaxone was investigated which has a thiol group out of the beta lactam ring. The electrocatalytic oxidation of these antibiotics is shown to be irreversible at the CoSal modified electrode. Scan rate dependence of cefazolin, which is a sulfur-containing compound, has been examined. The results indicated that the electrocatalytic oxidation of the compounds is diffusion controlled. The responses of the modified electrode were compared with those of unmodified electrode and it has shown that the modified electrode has better sensitivity than unmodified electrode to the detection of cefazolin. The overall number of electrons contributed to the oxidation of cefazolin is obtained 1 by chronoamperometry; the number of electron involved in the rate-determining step was 1. The results of differential pulse voltammetry (DPV) using the modified electrode with high sensitivity were applied for the determination of cefazolin in human synthetic serum samples. The linear range was obtained from 1 × 10⁻⁵ to 1 × 10⁻³ M for DPV determination of cefazolin in buffered solutions (pH 3.0).     

Amplified Electrochemical DNA Sensor Based on Polyaniline Film and Gold Nanoparticles

In this work, an electrochemical DNA biosensor, based on a dual signal amplified strategy by employing a polyaniline film and gold nanoparticles as a sensor platform and enzyme‐linked as a label, for sensitive detection is presented. Firstly, polyaniline film and gold nanoparticles were progressively grown on graphite screen‐printed electrode surface via electropolymerization and electrochemical deposition, respectively. The sensor was characterized by scanning electron microscopy (SEM), cyclic voltammetry and impedance measurements. The polyaniline‐gold nanocomposite modified electrodes were firstly modified with a mixed monolayer of a 17‐mer thiol‐tethered DNA probe and a spacer thiol, 6‐mercapto‐1‐hexanol (MCH). An enzyme‐amplified detection scheme, based on the coupling of a streptavidin‐alkaline phosphatase conjugate and biotinylated target sequences was then applied. The enzyme catalyzed the hydrolysis of the electroinactive α‐naphthyl phosphate to α‐naphthol; this product is electroactive and has been detected by means of differential pulse voltammetry. In this way, the sensor coupled the unique electrical properties of polyaniline and gold nanoparticles (high surface area, fast heterogeneous electron transfer, chemical stability, and ease of miniaturisation) and enzymatic amplification. A linear response was obtained over a concentration range (0.2–10 nM). A detection limit of 0.1 nM was achieved.     

Surface modification of glassy carbon electrode with the functionalized carbon nanotube for ultrasensitive electrochemical detection of risperidone

Risperidone (RIS), one of the typical antipsychotics drugs, originally approved to be used for the mental illness treatment, especially schizophrenia, bipolar disorder, autism and major depression. In the present study, different carbon nanostructures including functionalized multi-walled carbon nanotubes (F-MWCNTs), carbon nanoparticles, nanodiamond-graphite and reduced graphene oxide were employed for modification of the surface of glassy carbon electrode (GCE) for ultrasensitive detection of RIS. The most significant increase in the anodic peak current of RIS was observed on F-MWCNTs-modified electrode (compared to the other modified electrodes and bare GCE). The influence of different experimental parameters such as pH of the buffered solutions, the amount of the modifier and time and potential of the accumulation was optimized by monitoring the LSV responses toward RIS for the selected modified electrode. A wide linear dynamic range of 0.04–7 µM with a low detection limit of 12 nM was obtained. The results exhibit an acceptable performance of the proposed electrode for determination of RIS in the pharmaceutical and clinical preparations.     

Voltammetric Determination of Methimazole Using a Carbon Paste Electrode Modified with a Schiff Base Complex of Cobalt

The electrochemical behavior of methimazole, as an antithyroid agent, is investigated on the surface of a carbon‐paste electrode modified with a newly synthesized Schiff base complex of cobalt. The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of methimazole, leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction. The mechanism of the electrocatalytic process on the surface of the modified electrode is analyzed by obtaining the cyclic voltammograms in various potential sweep rates and pHs of the buffer solutions. The differential pulse voltammetry is applied as a very sensitive analytical method for the determination of sub‐micromolar amounts of methimazole. A linear dynamic range of 1×10^?6 to 1×10^?4 M with a detection limit of 5×10^?7 M is resulted for methimazole. The modified electrode is successfully applied for the accurate determination of methimazole in pharmaceutical and clinical preparations. The linear range in calibration curves remains constant in addition to tablet preparations of methimazole and also in spiking to the synthetic human serum samples. In comparison to calibration curves in background buffer solution, the slope of the curves showed a variation less than 3% in determinations in background solutions of tablet and human synthetic serum samples. These results showed high efficiency of the Voltammetric procedure for accurate determination of methimazole in drug and clinical preparations. The modified electrode can be prepared very easy and renewed in its surface by simple polishing. The reproducibility of the electrode response, based on ten measurements during two month, was 3.2% for the slope of the calibration curve.     

Electrochemical Synthesis of Polypyrrole in the Presence of Congo Red; Application to Selective Voltammetric Determination of Dopamine in the Presence of Ascorbic Acid

The electrosynthesis of polypyrrole (PPy) film has been achieved on glassy carbon electrode (GCE) in aqueous medium of Congo red (CR) by means of cyclic voltammetry (CV). The modified electrode exhibits high electrocatalytic activity toward dopamine (DA) oxidation, with drastic enhancement of the reversibility and peak currents. This modified electrode, due to electrostatic interactions, is capable to mask the response of ascorbic acid (AA) completely and provide an effective method for the detection of minor amounts of dopamine in the presence of high concentrations of AA. The electrochemical response of the film modified electrode is strongly dependent to the switching potential applied in the CV procedure of the electro‐polymerization. The results show that by increasing the switching potential more than 0.75 V, the peak of AA is gradually disappeared. This peak in potential of 0.85 V is reached to capacitive background current. With respect to the destruction of the conjugated structure of ppy and lowering the conductivity of the film at the surface of modified electrode, higher switching potentials cannot be suitable for electropolymerization procedure. The effects of various experimental parameters such as, number of polymerization cycles, switching potential, pH and potential sweep rate on the voltammetric response of dopamine were also investigated. The modified electrode shows a linear response to DA in the range of 0.5 to 100 μM with a detection limit of 0.1 μM. The prepared modified electrode does not show any considerable response toward sulfhydryl compounds, such as, cysteine, penicillamine and glutathione, revealing a good selectivity for voltammetric response to DA. The effective electrocatalytic property, ability for masking the voltammetric responses of the other biological reducing agents together with high reproducibility and stability make the modified electrode suitable for selective and sensitive voltammetric detection of sub‐micromolar amounts of DA in clinical and pharmaceutical preparations.     

Modification of carbon paste with congo red supported on multi-walled carbon nanotube for voltammetric determination of uric acid in the presence of ascorbic acid

A chemically modified carbon-paste electrode (CPE) is prepared by incorporating congo red (CR) immobilized on multi-walled carbon nanotube (MWCNT). The results show that CR is effectively immobilized on the surface of MWCNT under the ultrasonic agitation in aqueous solution and further incorporating the nafion. The prepared electrode, due to the electrostatic repulsions between the CR and ascorbate anion, is capable to mask the response of the ascorbic acid (AA) completely and provide an effective method for the detection of minor amounts of uric acid (UA) in the presence of high concentrations of AA. On the other hand, an increase in the microscopic area of the electrode by addition of MWCNT together with the electrocatalytic activity caused to a significant enhancement in the voltammetric response to UA. Optimization of the amounts of composite modifier in the matrix of CPE is performed by cyclic and differential pulse voltammetric measurements. The modified electrode shows a linear response to UA in the range of 1.0 × 10⁻⁷–1.0 × 10⁻⁴ M with a detection limit of 1.0 × 10⁻⁸ M. The electrode exhibits excellent accuracies for the determination of UA in the presence of high concentrations of AA (a recovery of 97.6%). The response of the electrode toward sulfhydryl compounds such as cysteine, penicillamine, and glutathione is not considerable. This reveals a good selectivity for the voltammetric response toward UA. The effective electrocatalytic property, ability for masking the voltammetric responses of the other biologically reducing agents, ease of preparation, and surface regeneration by simple polishing together with high reproducibility and stability of the responses make the modified electrode suitable for the selective and sensitive voltammetric detection of sub-micromolar amounts of UA in clinical and pharmaceutical preparations.     

Electrochemical determinations of 6-mercaptopurine on the surface of a carbon nanotube-paste electrode modified with a cobalt salophen complex

A mixture of multi-walled carbon nanotube/graphite paste electrode modified with a salophen complex of cobalt was prepared and was applied for the study of the electrochemical behavior of 6-mercaptopurine (MP) using cyclic and differential pulse voltammetry (DPV). An excellent electrocatalytic activity toward the oxidation of MP was achieved, which led to a considerable lowering in the anodic overpotential and remarkable increase in the response sensitivity in comparison with unmodified electrode. Utilizing DPV method, a linear dynamic range of 1–100 μM with detection limit of 0.1 μM was obtained in phosphate buffer of pH 3.0. The electrochemical detection system was very stable, and the reproducibility of the electrode response, based on the six measurements during 1 month, was less than 3.0% for the slope of the calibration curves of MP. The electrochemical method as a simple, sensitive, and selective method was developed for the determination of MP in pharmaceutical dosage form and human plasma without any treatments.     

Multi-walled carbon nanotube paste electrode for selective voltammetric detection of isoniazid

A multi-walled carbon nanotube paste electrode (MWCPE) is prepared as an electrochemical sensor with high sensitivity and selectivity in responding to isoniazid. The electrochemical oxidation of isoniazid is investigated in buffered solution by cyclic and differential pulse voltammetry. The electrode is shown to be very effective for the detection of isoniazid in the presence of other biological reductant compounds. The electrochemical oxidation of cysteine, due to the high overvoltage, is completely stopped at the surface of MWCPE. The electrode exhibits a very good resolution between the voltammetric peak of isoniazid and the peaks of ascorbic acid (AA) and dopamine (DA). A resolution of more than 450 mV between the anodic peak potentials makes the MWCPE suitable for simultaneous detection of isoniazid in the presence of AA or DA in clinical and pharmaceutical preparations. Differential pulse voltammetry (DPV) is applied as a sensitive method for the determination of isoniazid. The linear range in these determinations is 1 × 10⁻⁶–1 × 10⁻³ M for isoniazid and the detection limit is 5 × 10⁻⁷ M. The electrode was applied to the simultaneous determinations in isoniazid and AA mixtures and also, isoniazid and DA mixture over a wide concentration range. The slope variation for the calibration curves of isoniazid (RSD) was less than 4.5% (based on ten measurements over a period of three months).     

Modification of the Electrode Surface by Ag Nanoparticles Decorated Nano Diamond‐graphite for Voltammetric Determination of Ceftizoxime

A modified glassy carbon electrode with a film of nano diamond? graphite nano mixture decorated with Ag nanoparticles (AgNPs? NDG/GCE) was constructed and used for sensitive voltammetric determination of ceftizoxime (CFX). Morphology of AgNPs? NDG/GCE has been examined by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Experimental variables such as deposited amount of the modifier suspension, pH of the supporting electrolyte and accumulation potential and time were optimized by monitoring of CV and LSV responses of CFX. The results illustrate that AgNPs? NDG/GCE exhibits an excellent electrocatalytic effect in the electro‐oxidation of CFX that leads to a considerable improvement in the corresponding anodic peak current. This also allows the development of a highly sensitive voltammetric sensor for the determination of CFX in pharmaceutical and clinical samples. Under the optimum conditions, the modified electrode showed a linear response to the concentration of CFX in the range of 0.02–7 µM with detection limit of 6 nM. The prepared modified electrode has some remarkable electrochemical properties such as simple preparation, high sensitivity, excellent repeatability and reproducibility and long‐term stability.