Design of Novel Coplanar Counter Circuit in Quantum Dot Cellular Automata Technology

One of the emerging technology that can be used for replacing CMOS technology is Quantum-dot Cellular Automata (QCA) technology. Counter circuits are widely used circuits in the design of digital circuits. This paper presents and evaluates circuits for 2-, 3-, 4-, and 5-bit coplanar counter in the QCA technology. The designed QCA coplanar counter circuits are based on the modified D-Flip-Flop (D-FF) circuit that is designed in this paper. The designed QCA circuits are implemented and verified by using QCADesigner tool version 2.0.3. The results show that the designed circuits for 2-, 3-, 4-, and 5-bit coplanar counter contain 44 (0.03 μm²), 93 (0.07 μm²), 160 (0.13 μm²), and 245 (0.2 μm²) quantum cells (area). The comparison results indicate that the designed circuits have advantages compared to other QCA circuits in terms of cost, area, and cell count.

     

Esterification of Carboxylic Acids and Diacids by Trialkyl Borate under Solvent- and Catalyst-Free Conditions

Esterification or transesterification reactions are usually carried out in the presence of homogeneous or heterogeneous catalysts. However, recently a new method was reported for the esterification of carboxylic acids by tributyl borate under solvent- and catalyst-free conditions. In order to show the synthetic ability of trialkyl borate esters in the esterification reactions, here, the esterification of other carboxylic acids and diacids by tributyl-, triisoamyl-, and tribenzyl borate under the same conditions were reported. Some of the prepared ester and diester products have found wide applications as plasticizers and synthetic ester base lubricants. The esterification reactions have been cleanly carried out in the absence of any solvent under catalyst-free conditions. The maximum rate belongs to isoamyl trichloroacetate （VIb） which reached about 76% within about 6.5 h. On the basis of obtained findings, it seems that electron withdrawing groups on carboxylic acid facilitate the esterification reaction.     

Zinc and copper oxide nanoparticles decrease synaptosomal glutamate uptake: an in vitro study

Nanoparticles (NPs) are considered as an important environmental risk factor for cognitive impairments and neurodegenerative disorders. Recent evidences have reported a glutamatergic system response against air-borne NPs. Zinc and copper oxides (ZnO and CuO) NPs are the most common metal oxide NPs in industries. The effects of these NPs on hippocampal voltage-dependent ion channels and spatial cognition have been previously studied. However, there is a lack of evidence regarding the effects of ZnO and CuO NPs on glutamatergic synapse neurotransmission in central nervous system. In the present study, the effects of ZnO and CuO NPs on glutamate (Glu) release and uptake have been investigated in isolated nerve terminals (synaptosomes). Our findings have shown that, even in high doses of ZnO and CuO NPs, no significant effect on Glu release is observed. However, a decrease has been observed in uptake of Glu. Hence, ZnO and CuO NPs can be considered as hazardous agents inducing neurodegenerative disorders through Glu excitotoxicity.     

Theoretical study of the thermodynamic parameters of (CaO)n nanoclusters with n = 2–16 in the gas and solution phases: proton affinity,molecular basicity,and pKb values

Structural Chemistry - Thermodynamic quantities such as proton affinity (PA) and molecular basicity (GB) for (CaO)n nanoclusters with n?=?2–16 have been calculated using three...     

Efficient Fe/CuFeO2/rGO nanocomposite catalyst for electro‐Fenton degradation of organic pollutant: Preparation,characterization and optimization

The nanocomposite of zero‐valent iron and delafossite CuFeO₂ supported on reduced graphene oxide was synthesized for the first time to evaluate its performance as the heterogeneous catalyst toward electro‐Fenton (EF) removal of catechol. X‐ray diffraction, Fourier transform‐infrared, scanning electron microscopy and Brunauer–Emmett–Teller (BET) were used to characterize the nanocomposite. It was found that the rhombohedral structure of CuFeO₂ remained stable during the nanocomposite preparation. The BET surface area of the nanocomposite increased about 102 times in comparison with bare CuFeO₂. The influence of the operating parameters was investigated. The optimum operating conditions were pH 3, Fe/CuFeO₂/rGO: 1 g/l; catechol: 7.5 × 10^?4 mol/l; and I: 150 mA, which led to 99% and 78.4% catechol and chemical oxygen demand removal in 120 min, respectively. The stability of the catalyst by leaching measurements was studied. Only 2% and 3.1% of iron and copper, respectively, was leached in the solution. The obtained results introduced Fe/CuFeO₂/rGO as a stable and appropriate catalyst for removal of organic compounds by the EF process. It was inferred from the scavenger utilization that hydroxyl radical plays a major role in catechol elimination and EF reaction followed by the Haber–Weiss mechanism at optimum conditions. The gas chromatography–mass spectrometry analysis was performed to detect the intermediate products, and an acceptable degradation pathway was proposed. The EF degradation of catechol follows a pseudo‐first‐order kinetics model with a rate constant of 3.69 × 10^?2 min^?1 for the optimum operating conditions. The reusability of Fe/CuFeO₂/rGO was investigated for six cycles, and the catalytic efficiency almost remained.     

Multi‐Walled Carbon Nanotubes (MWCNT)‐Ionic Liquid‐Modified Carbon Paste Electrode: Probing FurazolidoneDNA Interactions and DNA Determination

The interactions of furazolidone (Fu) with double‐stranded calf thymus DNA (dsDNA) on the multi‐walled carbon nanotubes‐ionic liquid‐modified carbon paste electrode (MWCNT‐IL‐CPE) have been studied by cyclic voltammetry. In the presence of DNA, the cathodic peak current of Fu decreased and the peak potential shifted to a positive potential, indicating the intercalative interaction of Fu with DNA. The binding constant of Fu with DNA and stoichiometric coefficient has been determined according to the Hill's model. This electrochemical method was further applied to the determination of DNA. Two linear calibration curves were obtained for DNA detection in the concentration ranges of 0.03–0.10 and 0.10–4.0 μg l^?1 with a detection limit of 0.027 μg l^?1. The method was successfully applied to analyze Fu in serum samples.