Anti-plane elastodynamic analysis of planes with multiple defects

The solution of a screw dislocation under time-harmonic condition is obtained in an infinite isotropic plane by means of the Fourier transform method. The stress components reveal the familiar Cauchy singularity at the location of dislocation. The solution is employed to derive integral equations for a plane weakened by cracks and cavities. Cavities are considered as closed curved cracks without singularity. Several examples are solved and the stress intensity factor of cracks and hoop stress on cavities are obtained.     

Biosurfactant production under extreme environmental conditions by an efficient microbial consortium, ERCPPI-2

The biosurfactant production potential of a new microbial consortium of Enterobacter cloacae and Pseudomonas sp. (ERCPPI-2) which was isolated from heavy crude oil-contaminated soil in the south of Iran, has been investigated under extreme environmental conditions. The isolated consortium produces a biosurfactant mixture with excessive oil spreading and emulsification properties. This consortium was able to grow and produce biosurfactant at temperatures up to 70 °C, pressures up to 6000 psia, salinities up to 15% (w/v), and in the pH range 4-10. Besides, the optimum biosurfactant production conditions were found to be 40 °C and 7.0 for the temperature and pH value, respectively. These conditions gave the best biosurfactant production of 1.74 g/1 when the cells were grown on a minimal salt medium containing 1.0% (w/v) olive oil, 1.0% (w/v) sodium nitrate supplemented with 1.39% (w/v) K(2)HPO(4) at 40 °C and 150 rpm after 48 h of incubation. The ERCPPI-2 could reduce surface and interfacial tensions to 31.7 and 0.65 mN/m from the original values of 58.3 and 16.9 mN/m, respectively. The isolated consortium produced biosurfactant using heavy crude oil as the sole source of carbon and emulsified the available heavy crude oil up to E(24)=83.4%. The results of the core holder flooding tests at simulated reservoir conditions demonstrated that the oil recovery efficiency due to the injection of the cell-free biosurfactant solution was 27.2%, and the bacterium injection reduced the final residual oil saturations to below 3% at optimum conditions.     

Anti-plane elastodynamic analysis of orthotropic planes weakened by several cracks

Stress analysis is carried out in an orthotropic plane containing a Volterra-type dislocation, the distributed dislocation technique is employed to obtain integral equations for an orthotropic plane weakened by cracks under time-harmonic anti-plane traction. The integral equations are of Cauchy singular type at the location of dislocation which are solved numerically. Several examples are solved and the stress intensity factors for multiple cracks with different configuration are obtained.     

Experimental and Theoretical Assessment of Brittle Fracture in Engineering Components Containing a Sharp V-Notch

A criterion was proposed to predict brittle fracture in engineering components containing sharp V-shaped notches and subjected to mixed mode I/II loading. The criterion, called SV-MTS, was developed based on the maximum tangential stress (MTS) criterion proposed originally for analyzing crack problems. The curves which are obtained from the SV-MTS criterion could be used conveniently to predict the fracture resistance and also the notch bifurcation angle in sharp V-notched components under pure mode II and also mixed mode loading. To evaluate the validity of the proposed criterion, a set of fracture tests were conducted on a new test specimen, called sharp V-notched Brazilian disc (SV-BD), under mixed mode loading conditions. It is shown that the experimental results obtained from PMMA specimens are in very good agreement with the curves of SV-MTS criterion.     

Fabrication and characterization of low-cost freeze-gelated chitosan/collagen/hydroxyapatite hydrogel nanocomposite scaffold

In the present research, chitosan/collagen and chitosan/collagen/nano-hydroxyapatite (nHAP) hydrogel nanocomposites were prepared using naturally extracted chitosan from Persian Gulf shrimp wastes and rat tail-tendon collagen. Freeze-gelation method was used to prepare highly porous scaffolds. The morphology, chemical structure, water retainability, and thermal properties were characterized using SEM, FTIR, water content experiment, simultaneous thermal analysis (STA), respectively. Atomic force microscopy (AFM) nanoindentation and unconfined compression test were used to assess different feature of the mechanical properties of the hydrogels. The obtained results were so promising that the prepared nanocomposites can be considered as a potential candidate for cartilage tissue engineering.     

A Heuristic Insight on End-Point Calculation and a New Phase Interference Parameter in Two-Phase Relative Permeability Curves for Horizontal Fracture Flow

Relative permeability curves of two-phase flow in a fracture have been a subject of study in recent years. The importance of these curves have been widely observed in multidisciplines, such as water subsurface resources, geothermal energy and underground hydrocarbon resources, especially fractured oil and gas reservoirs. Extensive experimental studies have been cited alongside the numerical studies in this area. However, simple analytical and practical solutions are still attractive. In the current study, wettability effects and phase interference explicitly were tried to be implemented in a simple analytical formula. The wettability effects are represented by residual saturations which resulted in direct calculation of relative permeability end points. In addition, the phase interference part affected the shape of the curves that allowed to quantify the degree of phase interference from no phase interference, assigned as zero, to ultimate phase interference, assigned as infinity. The results were compared and validated with the available experimental data in the literature. The proposed formulation is applicable for both smooth and rough fracture assemblies.     

Analysis of fracture initiation angle in some cracked ceramics using the generalized maximum tangential stress criterion

Brittle fracture in ceramics sometimes occurs under combined opening-sliding (or mixed mode I/II) crack deformation. In this paper, a generalized maximum tangential stress criterion is employed for predicting the fracture initiation angle under mixed mode I/II loading in some brittle ceramics including alumina, zirconia, soda lime glass and three silicon based ceramics. The experimental results reported for the fracture angles in these ceramics have been obtained from fracture tests on the centrally cracked circular disc (often called the Brazilian disc). Very good agreement is shown to exist between the experimental results and the theoretical predictions. According to the fracture model, the mixed mode fracture angle is strongly dependent on the elastic T-stress in the tested ceramics. The negative T-stress that exists in the Brazilian disc specimen can be the main influencing parameter for decreasing the fracture initiation angle in the investigated ceramics.     

Fracture Assessment of Inclined Double Keyhole Notches in Isostatic Graphite

In the present contribution, the static strength of isostatic graphite using keyhole notch specimens under mixed mode loading is investigated. An experimental program was performed and in total, 18 new experimental data are provided. In addition, different loading mode ratios are considered by varying the inclination angle of the notch with respect to the direction of the applied load. The criterion based on the averaged value of the strain energy density over a control volume at the notch edge is applied to assess the static strength of specimens. A sound agreement is found between experimental data and the results obtained from strain energy density criterion.     

Mode III Notch Fracture Toughness Assessment for Various Notch Features

In the present paper, two stress-based failure criteria are proposed to predict the notch fracture toughness for three different notch features under pure mode III loading. These criteria are developed based on the two well-known failure concepts of the point-stress and the mean-stress previously used for predicting brittle fracture in notched members under various loading conditions. The validity of the criteria is verified through the comparison of their theoretical predictions with a bulk of test data reported in the open literature on mode III fracture of graphite notched round bars. Very good agreement is shown to exist between the experimental and theoretical results. Moreover, the comparison revealed that the mean-stress criterion is more accurate than the point-stress criterion in predicting mode III brittle fracture of V-notches and semicircular notches.