X-ray fluorescence in some rare earth and high Z elements excited by 661.6 keV γ-rays

The K-shell X-ray fluorescence cross sections are determined experimentally for 10 elements such as Pb, Hg, Ir, W, Lu, Tm, Dy, Tb, Gd and Nd at excitation energy of 661.6 keV associated with γ-rays of ¹³⁷Cs radioisotope. The technique employed involves the measurement of total intensity of fluorescent K X-rays that follow the photoeffect absorption of a known flux of γ-rays using a well type Nal(Tl) detector. The obtained results are compared with the available theoretical values and other measured values.     

Indirect potentiometric titration of sulphamethoxazole in the presence of trimethoprim in co-trimazole tablets using copper based mercury film electrode

A simple and rapid indirect potentiometric titration of sulphamethoxazole in the presence of trimethoprim contained in co-trimazole tablets is described. The method is based on the formation of a complex of sulphamethoxazole with a known excess of silver ions and the titration of unreacted silver ion potentiometrically using an inexpensive lab-made copper based mercury film electrode (CBMFE). The titration conditions have been optimized for the determination of 1.0-10.0 mg of sulphamethoxazole in pure and dosage forms. The precision and accuracy of the method have been assessed by the application of lack of fit test and other statistical methods. Overall mean recovery and relative standard deviations obtained were 99.88% and 1.32% (n=7) respectively. No interference was caused by other excipients present in pharmaceutical dosage forms. The application of this method for sulphamethoxazole assay in the presence of trimethoprim in tablets was validated by the comparison of results obtained by the proposed method with that of the British Pharmacopoeia (BP) method using F- and t-statistical tests of significance.     

A Box–Behnken Extraction Design and Hepatoprotective Effect of Isolated Eupalitin-3-O-β-D-Galactopyranoside from Boerhavia diffusa Linn.

The objectives of this study were to optimize and quantify the maximum percentage yield of eupalitin-3-O-β-D-galactopyranosidefrom Boerhavia diffusa leaves using response surface methodology (RSM), as well as to demonstrate the hepatoprotective benefits of the bioactive compound. The Box–Behnken experimental design was utilized to optimize the eupalitin-3-O-β-D-galactopyranoside extraction procedure, which also looked at the extraction duration, temperature, and solvent concentration as independent variables. Boerhaviadiffusa leaves were extracted, and n-hexane, chloroform, ethyl acetate, and water were used to fractionate the dried extracts. The dried ethyl acetate fraction was thoroughly mixed in hot methanol and stored overnight in the refrigerator. The cold methanol was filtered, the solid was separated, and hot methanol was used many times to re-crystallize the solid to obtain pure eupalitin-3-O-β-D-galactopyranoside (0.1578% w/w). The proposed HPTLC method for the validation and quantification of eupalitin-3-O-β-D-galactopyranosidewassuccessfully validated and developed. The linearity (R₂ = 0.994), detection limit (30 ng), and quantification limit (100 ng) of the method, as well as its range (100–5000 ng), inter and intraday precision (0.67% and 0.991% RSD), specificity, and accuracy (99.78% RSD), were all validated as satisfactory. The separation of the eupalitin-3-O-β-D-galactopyranoside band was achieved on an HPTLC plate using toluene:acetone:water (5:15:1 v/v) as a developing system. The Box–Behnken statistical design was used to determine the best optimization method, which was found to be extraction time (90 min), temperature (45 °C), and solvent ratio (80% methanol in water v/v) for eupalitin-3-O-β-D-galactopyranoside. Standard silymarin ranged from 80.2% at 100 µg/mL to 86.94% at 500 µg/mL in terms of significant high hepatoprotection (cell induced with carbon tetrachloride 0.1%), whereas isolated eupalitin-3-O-β-D-galactopyranoside ranged from 62.62% at 500 µg/mL to 70.23% at 1000 µg/mL. More recently, it is a source of structurally unique flavonoid compounds that may offer opportunities for developing novel semi-synthetic molecules.     

Adsorption of catechol on a wet silica surface: density functional theory study

Marine mussel proteins adhere permanently to diverse wet surfaces via their catechol (1, 2-dihydroxybenzene) functionality. To elucidate the molecular mechanism underlying this water-resistant adhesion, we performed density functional theory calculations for the competitive adsorption of catechol and water on a wet silica surface. Results show the energetic spontaneity of the reaction; catechol displaces water molecules and adheres directly to the surface. This result was subsequently corroborated by our molecular dynamics simulation.     

Pellet freezing of in vitro produced bovine embryos using dry ice

In vitro produced bovine embryos were frozen by pellet freezing or vitrification method. In the pellet freezing method, the embryos were cooled on the dry ice and then frozen as pellets. At warming, the pellets were immersed directly into 0.5 M sucrose. The survival rates of blastocysts frozen by the pellet freezing method were higher (P<0.01) in 40% ethylene glycol (EG) than those in the lower concentrations (20 and 30% EG). Higher survival rates of blastocysts frozen by the pellet freezing method were obtained but the development rates did not differ, as compared with those by the vitrification method. There were no significant differences between the pellet freezing and vitrification method in the frequencies of post-thaw survival of hatched blastocysts. These results demonstrate that the pellet freezing method using dry ice can be used successfully for the cryopreservation of blastocysts.     

Triphase catalysis. II. Alkylation of phenylacetone with 1-bromobutane catalyzed by aqueous NaOH and polystyrene-supported benzyltriethyl ammonium chloride

Insoluble microporous polystyrene-bound benzyltriethyl ammonium chloride has been used as a catalyst in the alkylation of phenylacetone with 1-bromobutane, and the kinetics of this reaction was investigated under phase-transfer catalytic conditions. The observed reaction rates depend on many experimental parameters, viz., stirring speed, substrate amount, basicity of aqueous NaOH, amount of 1-bromobutane, temperature, order of addition of the reactants and particle size, percent active site, and percent crosslinking of the polymer. The rates are nearly 12 times higher at lower concentrations of base than at higher concentrations and do not vary appreciably with a variation in stirring speed from 200 to 700 rpm. The rate of alkylation increases with a decrease in the particle size of the catalyst and crosslinking of the polymer. Based on the results obtained, a suitable mechanism in which a combination of intraparticle diffusion and intrinsic reactivity limit the reaction rates has been proposed. © 1993 John Wiley & Sons, Inc.