Site-specific phenylation of pyridine catalyzed by phosphido-bridged ruthenium dimer complexes: a prototype for C-H arylation of electron-deficient heteroarenes

Direct and selective catalytic arylation of alpha-C-H bond in pyridine with iodobenzene was achieved in up to 70% yield. Phosphido-bridged bisruthenium complexes 6a and 6b arising from Ru3(CO)12 and PPh3 were identified as active catalysts. The formation of complexes 6a and 6b was investigated, a sequence of C-H and C-P bond cleavage, cluster fragmentation, and disproportionation was established, and the intermediate ruthenium complexes lying on this pathway were isolated and fully characterized.     

Selective C-arylation of free (NH)-heteroarenes via catalytic C-H bond functionalization

A new system for palladium-catalyzed arylation of a broad spectrum of free (NH)-heteroarenes has been developed (indole, pyrrole, pyrazole, 2-phenylimidazole, imidazole, benzimidazole, and purine). Remarkable selectivity has been achieved in the presence of MgO base, providing single C-arylation products, while no N-arylation and no bis-arylation products have been detected. In the case of free imidazole, exclusive C-4 arylation may be switched to exclusive 2-arylation by the addition of CuI to the Pd/Ph3P/MgO system. When free aryl-(NH)-azoles are desired, direct arylation eliminates three steps in comparison to standard methods, including N-protection, stoichiometric metalation or halogenation, and N-deprotection.     

Selective and catalytic arylation of N-phenylpyrrolidine: sp3 C-H bond functionalization in the absence of a directing group

We herein describe our studies on arylation of N-phenylpyrrolidine, which led to the development of a new transformation for the direct and selective arylation of sp3 C-H bonds in the absence of a directing group. In this method, Ru(H)2(CO)(PCy3)3 4 was used as the catalyst, and preliminary mechanistic studies suggested that Ru(Ph)(I)(CO)(PCy3)2 5 is the key intermediate of the catalytic cycle. A large kinetic isotope effect (kH/kD = 5.4) was observed, which supports the proposal that C-H bond metalation is the slow step. Preliminary examination of the substrate scope showed that in addition to N-phenylpyrrolidine, N-methyl- and N-benzylpyrrolidine, as well as N-benzoylpyrrolidine, were arylated under the reaction conditions.     

Online Solid-Phase Extraction of Cd(II), Cu(II), and Co(II) Using Covalently Attached Bis(salicylaldimine) to Silica Gel for Determination in Food and Water by Flame Atomic Absorption Spectrometry

In this study, a novel sorbent material bearing a bis(aldimine) group was designed and successfully synthesized by covalently bonding a 2-[N,N′-bis(salicylaldimine)]aminoethyl amine ligand to the silica gel surface that was characterized by carbon, hydrogen, and nitrogen elemental analysis, thermogravimetric analysis, and the Fourier transform infrared spectroscopy technique. The sorbent was used for the online solid-phase extraction (SPE) of Cd(II), Cu(II), and Co(II) ions for their determination at trace concentration levels by flame atomic absorption spectrometry. The effective factors for the online SPE such as the pH and the flow rate of the sample solution, and type, volume, and flow rate of eluent were investigated. The concentration levels of Cd(II), Cu(II), and Co(II) were measured in certified reference materials including Virginia tobacco leaves (CTA-VTL-2) and water-trace elements (NWTM-15.2) to validate this method. The metal levels in environmental water were determined by this method, and the values were checked by spiking and recovery experiments and independent analysis by inductively coupled plasma-mass spectrometry. The adsorption capacities of the sorbent were found to be 41.2, 31.6, and 25.6?mg/g for Cd(II), Cu(II), and Co(II), respectively. This method was also successfully used for the determination of Cd(II), Cu(II), and Co(II) concentrations in rice and molasses.     

Dependency of thermal and electrical conductivity on temperature and composition of Sn in Pb–Sn alloys

The variations of thermal conductivity with temperature for Pb–Sn alloys were measured using a radial heat flow apparatus. The variations of electrical conductivity with the temperature for same alloys were determined from the Wiedemann–Franz law by using the measured values of thermal conductivity. According to present experimental results, the thermal and electrical conductivity of Pb–Sn alloys linearly decrease with increasing temperature but exponentially increase with increasing the composition of Sn. The enthalpy of fusion and the change of specific heat for Pb–Sn alloys were also determined by means of differential scanning calorimeter (DSC) from heating trace during the transformation from eutectic liquid to eutectic solid.     

Rhodium- and palladium-catalyzed 1,5-substitution reactions of 2-en-4-yne acetates and carbonates with organoboronic acids

Two methods involving the rhodium-catalyzed reaction of 2-en-4-yne acetates and the palladium-catalyzed reaction of 2-en-4-yne carbonates with organoboronic acids were investigated; both afforded exclusively the (E)-configured vinylallenes. The coordinative interaction of the rhodium with the acetate group promoted the δ-elimination of Rh(I)-OAc from the alkenylrhodium intermediate II in both syn and anti modes, with the syn-elimination being the major path. DFT calculations revealed that a conformer of this intermediate (II), which can lead to the (E)-configured vinylallene product via the syn-elimination mode, is energetically the most favorable conformer. The rhodium-catalyzed procedure is not applicable to reactions involving (E)-configured enyne acetates, because the geometry of the alkenylrhodium intermediate that is derived from the corresponding (E)-enyne acetate would not allow such coordinative interaction to occur. The palladium-catalyzed method, which proceeds through formation of the σ-vinylallenylpalladium intermediate, B, is suitable for both the (E)- and (Z)-configured enyne carbonates and appears to have a wider scope for both organoboronic acids and enyne substrates. The palladium-catalyzed reaction of an enantiomerically enriched enyne carbonate proceeded with racemization.     

Thermal conductivity and interfacial energy of solid Bi in the Bi–Ag eutectic system

Journal of Thermal Analysis and Calorimetry - The equilibrated grain boundary groove shapes for solid Bi (Bi–2.87 at.%Ag) in equilibrium with Bi–Ag eutectic liquid have been...     

Temperature dependency of thermal conductivity of solid phases for fatty acids

Thermal conductivity variations with temperature of solid phases for lauric acid (LA), myristic acid (MA), pivalic acid (PA), and stearic acid (SA) have been measured with radial heat-flow method. Temperature dependencies of the thermal conductivity for same organic materials have been obtained by linear regression analysis. From graphs of thermal conductivity versus temperature, the thermal conductivity of solid phase at their melting temperature and temperature coefficients of thermal conductivity for LA, MA, PA, and SA have been found to be 0.37, 0.39, 0.23, and 0.35 W K^?1 m^?1 and 0.00935, 0.00446, 0.01095, and 0.00295 K^?1, respectively. The ratios of thermal conductivity of liquid phase to thermal conductivity of solid phase for LA, MA, PA, and SA have also been measured to be 0.52, 0.48, 0.25, and 0.59, respectively, with a Bridgman-type directional solidification apparatus.     

Diversity synthesis via C-H bond functionalization: concept-guided development of new C-arylation methods for imidazoles

Herein, we have formulated the concept of systematic derivatization of a structural motif via C-H bond functionalization. This concept may not only serve as a blueprint for new strategies in diversity synthesis but also provide systematic guidance for the identification of unsolved and important synthetic challenges. To illustrate this point, 2-phenylimidazole was selected as the core motif for this study, a choice inspired by numerous azole-based synthetics, including pharmaceuticals (compound SB 202190), and also fluorescent and chemiluminescent probes. We were able to show that systematic and comprehensive arylation of the 2-phenylimidazole core was feasible, and in the context of this study new arylation methods were developed. The direct 4-arylation of free 2-phenylimidazole was achieved with iodoarenes as the aryl donors in the presence of palladium catalyst (Pd/Ph(3)P) and magnesium oxide as the base. A complete switch from C-4 to C-2' arylation was accomplished using a ruthenium catalyst [CpRu(Ph(3)P)(2)Cl] and Cs(2)CO(3). The corresponding transformations for (N,2)-diphenylimidazole (C-5 and C-2' arylation) were accomplished via the palladium-based method [Pd(OAc)(2)/Ph(3)P/Cs(2)CO(3)] and a rhodium-catalyzed procedure [Rh(acac)(CO)(2)/Cs(2)CO(3)], respectively. All of the arylation methods described herein demonstrated broad synthetic scope, high efficiency, and exclusive selectivity. Furthermore, these new methods proved to be orthogonal to one another and applicable to sequential arylation schemes. With these methods in hand, arrays of arylated imidazoles may now be accessed in a direct manner from 2-phenylimidazole. This strategy stands in sharp contrast to a traditional approach, wherein a distinct and multistep synthesis would be required for each analogue.     

Towards a holographic model of color-flavor locking phase

Journal of High Energy Physics - We examine the prospects for testing SO(10) Yukawa-unified supersymmetric models during the first year of LHC running at $ \sqrt s = 7\,{\text{TeV}} $ , assuming...