Application of microcrystalline cellulose as an efficient and cheap sorbent for the extraction of metoprolol from plasma and wastewater before HPLC–MS/MS determination

A dispersive solid-phase extraction method based on a new sorbent has been performed on plasma and wastewater samples to determine metoprolol by high-performance liquid chromatography–tandem mass spectrometry. In this study, the analyte was adsorbed from the samples onto microcrystalline cellulose as a green and efficient sorbent and then eluted for use in the determination step. In the mass spectrometer, the analyte was detected in the positive mode and selectivity of the analysis was increased by sequential mass analysis through multiple reaction monitoring. All of the effective parameters in the extraction of metoprolol from plasma and wastewater were optimized. Under optimal conditions the method was linear in the ranges of 1–1,000 and 0.1–1,000 ng/ml in plasma and wastewater samples, respectively. The detection limits of the method were 0.30 and 0.03 ng/ml in plasma and wastewater samples, respectively. The data showed that the method provides low detection limit, wide linear range, good precision and high extraction recovery. Finally several plasma and wastewater samples were successfully analyzed using the method. The use of a small amount of a green and inexpensive sorbent and a low volume of plasma without the need for further pretreatment steps are the main advantages of the method.     

A solution procedure for the discrete time, cost and quality tradeoff problem using electromagnetic scatter search

Decisions concerning a project’s expedition, traditionally involved considerations regarding time and cost tradeoff. It was recently suggested that the quality of a project should also be taken into considerations. In this paper, we propose a meta-heuristic solution procedure for the discrete time, cost and quality tradeoff problem. This problem involves the scheduling of project activities in order to minimize the total cost of the project while maximizing the quality of the project and also meeting a given deadline. We apply a so called electromagnetic scatter search to solve this problem. In this process, we initially generate a population of feasible solutions. In so doing, we use frequency memory to well sample the feasible region. A number of these solutions are then selected and improved locally. The improved solutions are then combined to generate new set of solutions. The combination process utilizes attraction–repulsion mechanisms borrowed from the electromagnetism theory. The whole process is stopped when no significant improvement in the set of solutions are observed. The validity of the proposed solution procedure is demonstrated, and its applicability is tested on a randomly generated large and complex problem having 19,900 activities.     

Headspace SPME–GC Method for Acetone Analysis and its Biomedical Application

A new method for extraction and analysis of acetone in human urine based on headspace solid phase microextraction using a mixture of activated carbon and zeolite as sorbents in a PVC matrix coated on a silver wire and its application to the determination of ketone bodies is described. Unlike commercial fibers, which are coated on fused silica, the coating adheres strongly to the silver wire and is thermally stable up to 250 °C. After optimization of coating composition and microextraction conditions the fiber was used for the analysis of acetone in human urine.     

Ion pairing, H-bonding, and π–π interactions in copper(II) complex-organo-networks derived from a proton-transfer compound of the 1,10-phenanthroline-2,9-dicarboxylic acid

The one-pot reaction between the novel proton transfer compound (pydaH₂)²⁺(phendc)²⁻, LH₂, and Cu(II) afforded the compounds (pydaH)₂[Cu(phendc)₂]·10H₂O, 1, and (pydaH)₂[Cu(phendc)(phendcH)]₂·5H₂O, 2, where pyda=2,6-diaminopyridine, and phendcH₂=1,10-phenanthroline-2,9-dicarboxylic acid. The single crystal X-ray diffraction analysis of 1 and 2 revealed that these are two novel self-assembled 3D Cu(II) complex-organo-networks, in which (pydaH)⁺ ions and [Cu(phendc)₂]²⁻ or complex units are held together by ion pairing, H-bonding, and π–π interactions. Magnetic measurements over the temperature range 1.8–310 K revealed no significant magnetic coupling between Cu(II) centers in 1 or 2.     

Calculation of the viscosity of binary liquids at various temperatures using Jouyban-Acree model

Applicability of the Jouyban-Acree model for calculating absolute viscosity of binary liquid mixtures with respect to temperature and mixture composition is proposed. The correlation ability of the model is evaluated by employing viscosity data of 143 various aqueous and non-aqueous liquid mixtures at various temperatures collected from the literature. The results show that the model is able to correlate the data with an overall percentage deviation (PD) of 1.9+/-2.5%. In order to test the prediction capability of the model, three experimental viscosities from the highest and lowest temperatures along with the viscosities of neat liquids at all temperatures have been employed to train the model, then the viscosity values at other mixture compositions and temperatures were predicted and the overall PD obtained is 2.6+/-4.0%.     

Active transient elasto-acoustic response damping of a thick-walled liquid-coupled piezolaminated cylindrical vessel

The linear 3D piezoelasticity theory in conjunction with the versatile transfer matrix approach and the wave equation for the internal acoustic domain are employed for active non-stationary vibroacoustic response control of an arbitrarily thick, tri-laminate, fluid-filled, simply supported, piezocomposite cylindrical tank, excited by arbitrary (non-axisymmetric) time-dependent on-surface mechanical loads. The smart structure is composed of a supporting core layer of functionally graded orthotropic material perfectly bonded to inner and outer spatially distributed radially polarized functionally graded piezoceramic sensor and uniform force actuator (FGPM) layers. Active vibration damping is implemented by transferring the accumulated voltage on the sensor layer to the piezoelectric actuator layer in context of proportional and derivative control laws. Durbin's numerical inverse Laplace transform scheme is utilized to calculate the time response histories of the relevant interface displacement/stress components, center-point acoustic pressure, and actuator voltage, for selected loading configurations (i.e., concentrated step, impulse, and moving external loads). Numerical simulations demonstrate the effectiveness of the adopted distributed sensing/actuation configuration together with the active damping control strategy in suppressing the vibroacoustic response of a three-layered (Ba₂NaNb₅O₁₅/Al/PZT4) water-filled piezoelastic cylindrical tank. Limiting cases are considered and the validity of results is established by comparison with the available data as well as with the aid of a commercial finite element package.     

Nanocrystalline TiO2-HClO4:A novel,efficient and recyclable catalyst for the chemoselective N-Boc protection of amines under solvent-free conditions

Nanocrystalline TiO₂-HClO₄,as newly reported catalyst,has been used as an efficient and reusable catalyst for the chemoselective N-Boc protection of amines.The clean,mild acidity condition, quantitative yields of products,short reaction time and low reaction temperature are attractive features of this reaction.In practice,this method is a combination of a satisfactory synthesis and more significantly easy product isolation and purification.     

Design,preparation and characterization of Cu/GA/Fe3O4@SiO2 nanoparticles as a catalyst for the synthesis of benzodiazepines and imidazoles

The synthesis and characterization of an efficient and reusable nanocatalyst, Cu/GA/Fe₃O₄@SiO₂, obtained by ultrasonic‐assisted grafting of guanidineacetic acid on modified Fe₃O₄@SiO₂ core–shell nanocomposite spheres and subsequent immobilization of Cu(II), are described. The catalyst was characterized by means of X‐ray diffraction, scanning and transmission electron microscopies, energy‐dispersive X‐ray spectroscopy, elemental analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, vibrating sample magnetometry and inductively coupled plasma optical emission spectrometry. The prepared nanocatalyst facilitated an efficient and straightforward friendly procedure for the synthesis of benzodiazepines and imidazoles in ethanol and under solvent‐free conditions, respectively. The nanocatalyst can be easily recovered using a magnet and reused several times without any significant loss of activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis,spectral, DFT calculations and antibacterial studies of Fe(III) complexes of new fluorescent Schiff bases derived from imidazo[4',5':3,4]benzo[1,2‐c]isoxazole

New fluorescent heterocyclic ligands were synthesized by the reaction of 8‐(4‐chlorophenyl)‐3‐alkyl‐3H‐imidazo[4',5':3,4]benzo [1,2‐c]isoxazol‐5‐amine with p‐hydroxybenzaldehyde and p‐chlorobenzaldehyde in good yields. The coordination ability of the ligands with Fe³⁺ ion was examined in an aqueous metanolic solution. Schiff base ligands and their metal complexes were characterized by elemental analyses, IR, UV–vis, mass, and NMR spectra. The optical properties of the compounds were investigated and the results showed that the fluorescence of all compounds is intense and their obtained emission quantum yields are around 0.15 – 0.53. Optimized geometries and assignment of the IR bands and NMR chemical shifts of the new complexes were also computed by using density functional theory (DFT) methods. The DFT‐calculated vibrational wavenumbers and NMR chemical shifts are in good agreement with the experimental values, confirming suitability of the optimized geometries for Fe(III) complexes. Also, the 3D‐distribution map for HOMO and LUMO of the compounds were obtained. The new compounds showed potent antibacterial activity and their antibacterial activity (MIC) against Gram‐positive and Gram‐negative bacterial species were also determined. Results of antibacterial test revealed that coordination of ligands to Fe(III) leads to improvement in the antibacterial activity.     

Use of nanoporous Na+-montmorillonite sulfonic acid (SANM) as an eco-benign, efficient and reusable solid acid catalyst for the one-pot synthesis of 14-aryl-14-H-dibenzo[a,j]xanthenes and 1,8-dioxo-dodecahydroxanthene derivatives

Nanoporous Na⁺-montmorillonite sulfonic acid was found to be an efficient and green catalyst for the synthesis of various 14-aryl-14H-dibenzo[a,j]xanthenes and 1,8-dioxo-dodecahydroxanthene derivatives by the reaction of aldehydes with 2-naphthol and 1,3-cyclohexanedione, respectively. This novel synthetic method has the advantages of high yields, short reaction times and recyclability of the catalyst, simplicity and easy workup compared to the conventional methods reported in the literature.