Constructing a new optical sensor for monitoring ammonia in water samples using bis(acetylacetoneethylendiamine)-tributylphosphin cobalt(III) tetraphenylborate complex-coated triacetylcellulose.

A new ammonia optical sensor was designed using bis(acetylacetoneethylendiamine)tributylphosphin cobalt(III) tetraphenylborate complex, coated on transparent triacetylcellulose film as membrane. The change in the absorbance of the optode at the maximum wavelength of 408 nm was related to ammonia concentration in aqueous samples. A buffer solution with a pH of 9 (sodium borate-HCl) was used. The optode was fully regenerated in pH 2. The linear dynamic range for determination of ammonia was 3.3 x 10(-4) to 6.9 x 10(-3) mol l(-1) with a detection limit of 5.0 x 10(-5) mol l(-1) and a response time range of 4 - 6 min. This membrane was successfully applied for determination of ammonia in drinking water.     

A rate-dependent algebraic stress model for turbulence

Based on the stress transport model, a rate-dependent algebraic expression for the Reynolds stress tensor is developed. It is shown that the new model includes the normal stress effects and exhibits viscoelastic behavior. Furthermore, it is compatible with recently developed improved models of turbulence. The model is also consistent with the limiting behavior of turbulence in the inertial sublayer and is capable of predicting secondary flows in noncircular ducts. The TEACH code is modified according to the requirements of the rate-dependent model and is used to predict turbulent flow fields in a channel and behind a backward-facing step. The predicted results are compared with the available experimental data and those obtained from the standard k-ε and algebraic stress models. It is shown that the predictions of the new model are in better agreements with the experimental data.     

High-dimensional quantum dynamical study of the dissociation of H2 on Pd110

We report the first six-dimensional quantum dynamical study of the dissociative adsorption of H(2) on a (110) surface. We have performed quantum coupled-channel calculations for the system H(2)/Pd(110) based on a potential energy surface (PES) that was derived from ab initio electronic structure calculations. In particular, we have focused on the effects of the corrugation and anisotropy of the PES on the H(2) dissociation probability. Our results agree well with the available experimental data for the sticking probability as a function of the initial kinetic energy and the angle of incidence. Because of the coupling between the anisotropy and corrugation of the potential energy surface our calculations predict an unusual rotational heating and a rather small rotational alignment in desorption.     

New computer program to calculate the symmetry of molecules

In this paper we, present some MATLAB and GAP programs and use them to find the automorphism group of the Euclidean graph of the C₈₀ fullerence with connectivity and geometry of I _h symmetry point group. It is proved that this group has order 120 and is isomorphic to I _h ≊Z₂×A₅, where Z₂ is, a cyclic group of order 2 and A₅ is the alternating group on five symbols.     

Bioaccumulation and biosorption of stable strontium and <Superscript>90</Superscript>Sr by <Emphasis Type="Italic">Oscillatoria homogenea</Emphasis> cyanobacterium

The ability of living filamentous cells of the cyanobacterium Oscillatoria homogenea to separate stable strontium and ⁹⁰Sr from aqueous solution is demonstrated in this study. On a basis of filamentous cell biovolume, the removal were 43.78 nM·ml·(mm³)⁻¹ and 3129.48 mBq·ml·(mm³)⁻¹ after 240 hour incubation. The optimum pH for strontium uptake is 9±0.3. The increasing biovolume of the blue-green alga elevates sorption. In the liquid culture containing 21.2 mm³·ml⁻¹ filamentous cells and 1000 nM·ml⁻¹ initial strontium concentration, the maximum strontium removal was 455.34 nM·ml·(mm³)⁻¹. At 1200 Lux illumination, the maximum removal value was 58.62 nM·ml·(mm³)⁻¹, and at the initial strontium concentration of 6590 nM·ml⁻¹, 235.40 nM·ml·(mm³)⁻¹ removal was observed. The experimental data fitted to Langmuir isotherm and the model parameters and correlation coefficient (R ²) were q _max = 7.143 μg·(mm³)⁻¹, b = 0.003 and 0.99, respectively.     

Predict the thermal conductivity of SiO2/water–ethylene glycol (50:50) hybrid nanofluid using artificial neural network

Journal of Thermal Analysis and Calorimetry - In the current work, after generating experimental data points for different volume fraction of nanoparticles ( $$\phi$$ ) and different temperatures,...     

Predictive QSAR modeling for the antioxidant activity of natural compounds derivatives based on Monte Carlo method

Molecular Diversity - In this research, QSAR modeling was carried out through SMILES of compounds and on the basis of the Monte Carlo method to predict the antioxidant activity of 79 derivatives of...     

Reducing Occupational Noise Propagated from Centrifugal Fan through Dissipative Silencers: A Field Study

Acoustic performance of dissipative silencer was evaluated to determine the effectiveness of perforated duct porosity and absorbent material density in reducing occupational noise exposure propagated from centrifugal fan. Design charts were applied to predict noise reduction and length of a dissipative silencer. Dissipative silencers with various punched duct porosity (14%, 30% and 40%) and sound absorbent density (80 Kg/m³, 120 Kg/m³, and 140 Kg/m³) were designed and fabricated. According to ISO9612 and ISO11820, noise level was measured before and after installing all nine test silencers at fixed workstations around the discharge side of a centrifugal fan in a manufacturing plant. On average, the noise level at the discharge side of a fan without silencer was measured to be 93.6 dBA, whereas it was significantly mitigated by 67.4 dBA to 70.1 dBA after installing all silencers. Dynamic insertion loss for a dissipative silencer with 100 cm length was predicted to be 27.9 dB, which was in agreement with experimental ones. Although, there was no significant differences between insertion loss of silencers, the one with 30% porosity and 120 Kg/m³ rock wool density had the highest insertion loss of 26.2 dBA. Dissipative silencers noticeably reduced centrifugal fan noise exposures. Increasing sound absorbent density and duct porosity up to a certain limit could probably be effective in noise reduction of dissipative silencers.     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.     

A novel inorganic–organic nanohybrid material SBA-15@triazine/H<Subscript>5</Subscript>PW<Subscript>10</Subscript>V<Subscript>2</Subscript>O<Subscript>40</Subscript> as efficient catalyst for the one-pot multicomponent synthesis of multisubstituted pyridines

A novel inorganic–organic nanohybrid material SBA-15@triazine/H₅PW₁₀V₂O₄₀ (SBA-15@ADMPT/H₅PW₁₀V₂O₄₀) was prepared and used as an efficient, eco-friendly, and highly recyclable catalyst for the one-pot multicomponent synthesis of multisubstituted pyridines from the reaction of aldehydes, cyclic ketones, malononitrile, and ammonium acetate with good to excellent yields (77–97%). The nanohybrid catalyst was prepared by the chemical anchoring of Keggin heteropolyacid H₅PW₁₀V₂O₄₀ onto the surface of SBA-15 mesoporous silica modified with 2-APTS -4,6-bis(3,5-dimethyl-1H-pyrazol-1-yl)-1,3,5-triazine (ADMPT) linker. Standard characterization data such as FT-IR, XRD, SEM, TEM, BET, EDX, and DTA-TGA spectroscopy confirmed that the heteropolyacid H₅PW₁₀V₂O₄₀ is well dispersed on the surface of the solid support and its structure is preserved after immobilization on the SBA-15 mesoporous silica modified with ADMPT. Furthermore, the nanocatalyst can be recovered easily and reused five times without considerable loss of catalytic activity. In general, these advantages highlight this protocol as an attractive and useful methodology, among the other methods reported in the literature, for the eco-friendly and rapid synthesis of biologically active multisubstituted pyridines.