Controlling a bunch of multiple filaments by means of a beam diameter

We demonstrate a three orders of magnitude increase and stability in the backscattered fluorescence signal from nitrogen molecules by terawatt femtosecond laser pulse induced air filaments using a new method. The method is based on squeezing the initial beam diameter using a telescope. The effect of laser shot-to-shot fluctuations was included in numerical simulations by a random distribution of the initial intensity in both squeezed and non-squeezed beams. Statistical processing of the simulation results shows that the average diameter of plasma channels as well as the total amount of free electrons generated in a bunch of multiple filaments in air is larger in the squeezed beam. Shot-to-shot stability of the simulated plasma density increases in the squeezed beam. The change of this plasma density with propagation distance is in good qualitative agreement with the change of the range-corrected nitrogen fluorescence signal with distance. PACS 42.65.Jx; 42.60.Jf; 42.68.Ay; 42.68.Wt     

Fabrication and Determination of Refractive Index Profile of the Planar Waveguides by Wedge Technique

Several planar waveguides have been fabricated. The waveguides have been polished for determination of their refractiveindex profiles (RIP) by wedge method. The RIP determined by inserting the sample in a Mach-Zehnder interferometer andapplying fringe analysis methods.     

Thermodynamic properties of transition metals in aqueous solution. 2. The enthalpies of mixing of aqueous solutions of CoCl2, CuCl2, and MnCl2 with NaCl at varying ionic strength at 25°C

Enthalpies of mixing (_m H) aqueous solutions of CoCl₂, CuCl₂, and MnCl₂ with NaCl solutions were measured at constant ionic strengths of 0.5, 1.0, and 3.0 molal at 25°C. The excess enthalpy equations of Pitzer were then fit to the resulting _m H data. The resulting parameters are the temperature derivatives of the activity coefficient mixing parameters in the Pitzer system. The heat of mixing data for CoCl₂ and CuCl₂ were in agreement with earlier isomolal results by other workers.     

Headspace solvent microextraction of trihalomethane compounds into a single drop

Headspace solvent microextraction (HSME) into a single drop is developed for the determination of six trihalomethanes, CH2Cl2, CHCl3, C4H9Cl, CCl4, C2HCl3, and C2Cl4, in aqueous solution. A drop of benzyl alcohol containing bromoform, as an internal standard, is used for extraction. The analytes are extracted by suspending a 3-microL drop directly from the needle of a microsyringe. The needle passes through the septum of a vessel, and the needle tip appears above the surface of the solution. After the prescribed extraction time, the drop is drawn back into the syringe. The syringe is then removed, and its content is injected directly into a gas chromatography column for analysis. The main parameters affecting the HSME process, such as stirring speed, microdrop volume, sample solution temperature, microsyringe needle temperature, sample volume, solution pH, extracting solvent, and ionic strength of the solution, are studied. Also, the linear range and precision of the method are examined.     

Potentiometric determination of ultratrace amounts of fluoride enriched by zirconia in a flow system

A satisfactory method was described for separation and preconcentration of ultratrace amounts of fluoride ions enriched by zirconia (ZrO₂) as an inorganic ion exchanger. Fluoride ions can be adsorbed rapidly and selectively on zirconia from an acidic solution (pH 4.8) then reversibly desorbed by increasing pH up to 13. A flow system consisting of a column packed with zirconia impregnated on cellulose fibers and an ion-selective electrode was used for the determination of fluoride. The RSD was found to be 1.6% and the detection limit defined by S/N = 3 was 3 × 10⁻⁹ mol L⁻¹. The interference effects of various ions, such as nitrate, sulfate, halides, alkaline, and alkaline earth ions, which may be found in the environmental water, were studied, and it was found that they were tolerated even at high concentrations. The method was applied to determine fluoride in drinking water, which contains ultratrace amounts of fluoride. The concentration of fluoride was found to be 42 μg L⁻¹, which is confirmed by spiking 2 μmol fluoride to the drinking water with a recovery of 99%. Published in Russian in Zhurnal Analiticheskoi Khimii, 2006, Vol. 61, No. 2, pp. 179–183. The text was submitted by the authors in English.     

The effect of the physical and chemical characteristics of activated carbons on the adsorption energy and affinity coefficient of Dubinin equation

The dependency of adsorption energy (E) and affinity coefficient (beta) of Dubinin equations (Dubinin-Radushkevich (DR) or Dubinin-Astakhov (DA)) on surface chemistry and porosity of activated carbons was investigated by analyzing adsorption of nitrogen, benzene, trichloroethylene (TCE), and water vapor by several surface-modified activated carbons and carbon fibers. For all studied nonpolar adsorbates, carbons with smaller average micropores showed higher adsorption energies independent of their surface chemistry. For water vapor, carbons with higher surface polarities showed higher adsorption energies due to specific adsorbate-adsorbent interactions. Adsorption energies increased with decreasing average micropore widths. betaN2,DR for different carbons were observed to vary in the 0.292-0.539 range. Carbons with higher degrees of mesoporosity had higher betaN2,DR values, while no dependency was observed between betaN2,DR and surface chemistry. A comparison of DR and DA cases indicates that: (1) the average value of betaN2,DA is considerably above the classical value of this parameter; and (2) the range of betaN2,DA values were smaller compared to betaN2,DR, despite a wide range of mesoporosity of carbons examined. Obtained beta(TCE,DR) values varied in the 0.952-1.243 range, with an average value of 1.085+/-0.083, independent of surface chemistry or porosity of activated carbons. A similar result was observed for beta(TCE,DA). betaH2O,DR values of different granular and fibrous activated carbons changed in the range of 0.081-0.271. They depended more on the carbon surface chemistry and less on the porosity. A similar result was obtained when DA equation was considered.     

Photodegradation of polypropylene thermal bonded non-woven fabric

Samples of thermal bonded polypropylene non-woven fabrics were exposed to light from two TUV 30W G30T8 Philips lamps (λ = 253.7 nm) in a covered open-air chamber at room temperature (25 °C and 55% relative humidity) for different periods of time. In order to determine the state of degradation, the samples were examined by optical microscopy, scanning electron microscopy, staining with an isopropanol solution of methylene blue and Sudan III, colourimetry, Fourier transform infrared (FTIR) spectroscopy and density measurements. Although the bonded areas formed under complex thermal and mechanical deformations during the fabric production, no localized staining was observed. The colour of the irradiated and stained fabrics changed uniformly due to the even production of polar groups in the process of irradiation. It was found that the change of redness and blueness of degraded and stained samples can be correlated linearly with the evolution of POOH groups as determined by FTIR spectroscopy. Products containing carbonyl (CO), hydroxyl and/or hydroperoxide (POOH) groups increase with time of degradation with a non-linear relation. It was also observed that the density and 997 cm⁻¹/972 cm⁻¹ FTIR absorbance ratio increases with degradation time. Density fluctuation and the build up of degradation products caused fibre cracks and embrittlement.     

Stripping voltammetry of thorium based on adsorptive accumulation

A sensitive stripping voltammetric procedure for quantifying thorium is described. The chelate of thorium with the azo dye Mordant Blue 9 is adsorbed on the hanging mercury drop electrode, and the reduction current of the accumulated chelate is measured during a negative-going potential scan. Cyclic voltammetry is used to characterize the interfacial and redox behaviors. The effects of pH, dye concentration and accumulation potential are discussed. The detection limit is 4 × 10^?10 M (4-min accumulation), a linear current-concentration relationship is observed up to 1.3 × 10^?7 M, and the relative standard deviation (at the 6 × 10^?8 M level) is 3.1%. Possible interferences by trace metals and organic surfactants are investigated. Simultaneous quantitation of thorium and nickel is illustrated.     

A study of peroxyoxalate-chemiluminescence of acriflavine

The chemiluminescence arising from the reaction of bis(2,4,6-trichlorophenyl)oxalate (TCPO) with hydrogen peroxide in the presence of acriflavine has been studied. The relationship between the chemiluminescence intensity and concentrations of TCPO, H2O2, acriflavine and the base sodium salicylate are reported. The kinetic parameters for the peroxyoxalate-chemiluminescence (PO-CL) of acriflavine were evaluated from the computer fitting of the corresponding chemiluminescence intensity-time plots.