Combined protein A imprinting and cryogelation for production of spherical affinity material

Cryogels have been demonstrated to be efficient when applied for protein isolation. Owing to their macroporous structure, cryogels can also be used for treating particle‐containing material, e.g. cell homogenates. Another challenging development in protein purification technology is the use of molecularly imprinted polymers (MIPs). These MIPs are robust and can be used repeatedly. The paper presents a new technology that combine the formation of cryogel beads concomitantly with making imprints of a protein. Protein A was chosen as the print molecule which was also be the target in the purification step. The present paper describes a new method to produce protein‐imprinted cryogel beads. The protein‐imprinted material was characterized and the separation properties were evaluated with regard to both the target protein and whole cells with target protein exposed on the cell surface. The maximum protein A adsorption was 18.1 mg/g of wet cryogel beads. The selectivity coefficient of protein A‐imprinted cryogel beads for protein A was 5.44 and 12.56 times greater than for the Fc fragment of IgG and protein G, respectively.     

Experimental and Quantum Chemical Studies of 5-Fluoroisatin-3-(N-Cyclohexylthiosemicarbazone) and Its Metal Complexes

Abstract

Zn(II) and Ni(II) complexes of 5-fluoroisatin-3-[-(N-cyclohexylthiosemicarbazone)] (H₂FIC) have been prepared and characterized structurally by means of elemental analyses, FTIR, electronic, and ¹H NMR spectra. The theoretical wavenumbers, IR intensities, and molecular parameters have been calculated by the ab-initio Hartree–Fock (HF) method with the LanL2DZ basis set. The theoretical wavenumbers show a good agreement with experimental data. The bond lengths, bond angles, the highest occupied molecular orbital energy (E_HOMO), the lowest unoccupied molecular orbital energy (E_LUMO), the energy gap between E_HOMO and E_LUMO (ΔE_HOMO-LUMO), dipole moment, and charges on the atoms of H₂FIC as monomer form were studied by the density functional theory/Becke-3-Lee-Yang-Parr (DFT/B3LYP) and ab-initio HF methods using 6-31G(d,p) basis set. The trimeric possible structure of H₂FIC was also investigated using HF method. The observed IR wavenumbers of the H₂FIC were analyzed in the light of the computed vibrational spectra of its monomer and trimer forms.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Two new zinc(II) and mercury(II) complexes based on N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide): synthesis,crystal structures and antibacterial activities

Reaction of N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide), C₂₀H₁₈F₂N₄O₂, ( L^F ), with zinc chloride and mercury(II) chloride produced different types and shapes of neutral coordination complexes, namely, dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ²N,O]zinc(II), [ZnCl₂(C₂₀H₁₈F₂N₄O₂)], ( 1 ), and dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ⁴O,N,N′,O′]mercury(II), [HgCl₂(C₂₀H₁₈F₂N₄O₂)], ( 2 ). The organic ligand and its metal complexes are characterized using various techniques: IR, UV–Vis and nuclear magnetic resonance (NMR) spectroscopies, in addition to powder X‐ray diffraction (PXRD), single‐crystal X‐ray crystallography and microelemental analysis. Depending upon the data from these analyses and measurements, a typical tetrahedral geometry was confirmed for zinc complex ( 1 ), in which the Zn^II atom is located outside the bis(benzhydrazone) core. The Hg^II atom in ( 2 ) is found within the core and has a common octahedral structure. The in vitro antibacterial activities of the prepared compounds were evaluated against two different bacterial strains, i.e. gram positive Bacillus subtilis and gram negative Pseudomonas aeruginosa bacteria. The prepared compounds exhibited differentiated growth‐inhibitory activities against these two bacterial strains based on the difference in their lipophilic nature and structural features.     

The Crystal and Molecular Structure of an Antidepressant Drug (Isocarboxazid)

The crystal arid molecular structure of 5-methyl-3-isoxazole carboxylic acid 2-benzylhydrazine (isocarboxazid, C₁₂H₁₃N₃O₂), an antidepressant drug, has been determined by X-ray diffraction method and IR analysis. The compound crystallizes in the monoclinic space group P2₁/c, with a = 6.376(1), b = 14.131(1), c = 13.256(1) Å, β = 99.75(1)°. The structure has been solved by using SIR program and refined to R = 0.048. The benzene and isoxazoles rings are not coplanar and have a dihedral angle of 167.7(5)° between their respective planes. Some of the bond lengths and angles found in the molecule are distorted due to π-electron delocalization and strain. The infrared spectrum of isocarboxazid has been also reported and assignments have been suggested for some characteristic bands. These assignments were confirmed by X-ray analysis.     

A kinetic investigation of removal of chromium from aqueous solutions with a strong cation exchange resin

A kinetic investigation was performed with an ion exchange resin for chromium. A strong cation exchange resin (Amberlite IR 120) was used for removal of chromium. The effects of concentration, resin amount, and stirring speed on kinetics were investigated. The metal concentration range studied was between 5 to 160 mg/dm³ (the amount of solution was 4 dm³), the resin amount range was between 5 to 20 mg, and the stirring speed range was between 1000 to 3500 rpm. Equilibrium experiments were performed for calculation of separation factor. Kinetic studies were done using a Kressman-Kitchener stirrer reactor system and the results were compared with existing kinetic models. Two models, Nernst-Plank film diffusion control model (fdc) and solid phase diffusion control model (pdc), respectively were identified, and the dependence of the rate on parameters such as solution concentration, resin amount, stirring speed, etc. was examined for each of them. The interpretation of these data shows that the system is probably controlled by both film and particle diffusion. Correspondence: Sevgi Kocaoba, Department of Chemistry, Faculty of Art and Science, Yildiz Technical University, Davutpasa Cad. No: 127, 34210 Davutpasa-Istanbul, Turkey.     

Highly sensitive spectrophotometric methods for the determination, validation and thermogravimetric analysis of antiulcer drugs, nizatidine and ranitidine in pure and pharmaceutical preparations

Two sensitive, simple and rapid UV and second order derivative spectrophotometric methods were developed for the determination of nizatidine and ranitidine hydrochloride in pure form and pharmaceutical preparations. For the first method, UV spectrophotometic method, nizatidine was determined at 325 nm and ranitidine at 325.5 nm with detection limits of 0.07 and 0.04 μg/mL, respectively. For the second method, the distances between two extremum values (peak-to-peak amplitudes), 328/356.5 nm for nizatidine and 326/357 nm for ranitidine were measured in the second order derivative-spectra. The detection limits were found to be 0.02 μg/mL for nizatidine and 0.016 μg/mL for ranitidine, respectively. The thermal analysis of the two drugs was studied by Thermogravimetric Analysis-Differential Scanning Calorimetry (TGA-DSC) techniques. Enthalpy changes were obtained 121.9 and 124.15 J/g for nizatidine and ranitidine, respectively. The proposed method was successfully applied to the analysis of pharmaceutical preparations. The results were in good agreement with those obtained using the reference method; no significant difference were found in the accuracy and precision as revealed by the accepted values of t- and F-tests.     

Spectrofluorimetric Determination and Validation of Biotin in Pure and Dosage Form via Derivatization with 4-Fluoro-7-nitrobenzofurazan

A simple and highly sensitive spectrofluorimetric method was developed for the determination of biotin in pure and dosage form. The method is based on the derivatization of biotin with 4‐fluoro‐7‐nitrobenzofurazan in borate buffer of pH 9.0 to yield a yellow, fluorescent product. The various chemical conditions that affected the reaction were studied. The method was validated for specificity, linearity, precision, accuracy, recovery and robustness. At optimized experimental conditions, a linear relationship between the fluorescence intensity of the concentration of biotin is observed in the range 45–450 ng/mL. Limit of detection and quantification were 0.038 and 0.114 ng/mL, respectively. The percentage mean recovery was 99.96. The proposed procedure was successfully applied to the determination of biotin in its dosage form with mean recovery of 101.23±1.22 for biotin tablets. The results obtained were in good agreement with those obtained by the reference method.     

Determination of Ciprofloxacin in Human Plasma and Urine by Precolumn Derivatization High Performance Liquid Chromatography with Fluorescence Detection

A sensitive, simple and selective high‐performance liquid chromatographic (HPLC) method was developed for the determination of ciprofloxacin in biological fluids. The method is based on the reaction between the drug and 4‐chloro‐7‐nitrobenzofurazan (NBD‐Cl) in borate buffer of pH 9.0 to yield a highly fluorescent derivative that is measured at 535 nm after excitation at 464 nm. The calibration curves were linear over the concentration ranges of 25–3000 and 50–3000 ng·mL^?1 for plasma and urine, respectively. The mean recovery of ciprofloxacin from plasma and urine was 98.37% and 98.40%, respectively. The method was found to be sensitive, precise, accurate, and reproducible. All of the validation parameters were within the acceptance range.     

Fourier Transform Infrared and Raman Spectra of 4-Vinylpyridine and its Transition Metal(II) Tetracyanonickelate Complexes

Abstract

Infrared and Raman spectra (4000-200 cm^?1) were recorded for 4-vinylpyridine and vibrational assignments made for fundamental modes on the basis of frequency shifts of the coordinated ligand, of the group vibrational concept and comparison with the assignments for related molecules. the infrared spectra of M(4-vinylpyridine)₂Ni(CN)₄ (M=Mn, Cd, Fe, Co, Ni or Cu) are reported.     

2-Morpholinoethyl-substituted <Emphasis Type="Italic">N</Emphasis>-heterocyclic carbene (NHC) precursors and their silver(I)NHC complexes: synthesis,crystal structure and in vitro anticancer properties

In this study, a series of unsymmetrically 2-morpholinoethyl-substituted benzimidazolium salts and their Ag(I)NHC complexes were synthesized. The 1,3-dialkylbenzimidazolium salts (1a–d) were synthesized in dimethylformamide at 80 °C temperature from the N-(2-morpholinoethyl)benzimidazole and alkyl halides. The Ag(I)NHC complexes (2a–d) were synthesized in dichloromethane at room temperature from the benzimidazolium salts and Ag₂O. All compounds were characterized by spectroscopic techniques (NMR and FT-IR) and elemental analyses. Also, the salt 1c and complex 2c were characterized by single-crystal X-ray crystallography. Anticancer activities of 2-morpholinoethyl-substituted benzimidazolium salts and Ag(I)NHC complexes were investigated against the MCF-7 breast cancer cell line, and the IC₃₀ and IC₅₀ values of these compounds were found to be in the range of 241–490 and 6–14 µM, respectively.