Synthèse partielle et propriétés oncostatiques des pseudo-tubulosines,analogues de l'émétine et de la tubulosine

Partial Synthesis and Oncostatic Properties of Pseudotubulosines, Analogues of Emetine and Tubulosine Pseudotubulosines, structural analogues of emetine and tubulosine, have been synthesized by either Pictet-Spengler or Bischler-Napieralski condensation from dihydrocorynantheal or corynantheidal. Spectral data, cytotoxic and oncostatic properties of these new alkaloids are described.     

Microanalysis of polymers using a windowless energy-dispersive X-ray detector

The surface compositions of various polymeric films, grown electrochemically on platinum foils, have been investigated by energy-dispersive x-ray analysis in conjunction with scanning electron microscopy (SEM/EDS). Comparison of the relative area ratios of peaks for the C and N K_emission lines show that the EDS may be used to study the surface composition of polymers. The evidence presented strongly suggests that there is limited structural degradation and the elemental composition is not changed under the electron beam at relatively low accelerating voltages. This technique statistically samples the repeat units of the polymer. For samples grown in both aqueous and nonaqueous solutions. SEM/EDS provides evidence for extensive contamination with oxygen.     

Anomalous NMR behavior of meso compounds with remote stereogenic centers on addition of chiral shift reagent or chiral solvating agent

A problem has arisen in using chiral shift reagents (CSR) and chiral solvating agents (CSA) to determine meso and racemic forms of diastereoisomers in which the stereogenic centers of the molecules are separated by achiral spacers. It is found that NMR signals of both meso and racemic forms of diastereoisomers may exhibit doubling on addition of CSR/CSA, which means that unequivocal assignments cannot be made without characterizing the effects for separate meso and racemic forms; this is particularly important for additions of CSR/CSA at relatively low concentrations, which always result in the splitting of some NMR signals of diastereoisomers. The phenomenon is demonstrated in the (31)P NMR spectra of meso and racemic forms of three spermine-bridged gem-disubstituted cyclotriphosphazatrienes, 1a-c, and compared with analogous achiral molecules, the per-substituted spermine-bridged cyclotriphosphazatrienes 2a-d. As expected, only one set of (31)P NMR signals was observed for the achiral compounds 2a-d, even on addition of CSA. Two sets of (31)P NMR ABX multiplets corresponding to meso and racemic diastereoisomers were observed for compounds 1a-c; on addition of CSA, the signals of at least one of the multiplets for each compound separated into more than the expected groups of three lines with an intensity distribution of 2:1:1. To understand this phenomenon, the meso and racemic forms of 1a and 1b and the meso form of 1c have been separated and characterized by X-ray crystallography. On addition of CSA to the racemic forms of 1a and 1b, the (31)P NMR spectrum shows the expected doubling of signals, but, unexpectedly, the same is observed for each of the meso forms of 1a-c. Analogous results using both CSA and CSR have been obtained for the meso and racemic forms of the diastereoisomeric piperazine-bridged macrocyclic-phosphazene compound, 3, whereas no effect was observed for the two meso forms of the doubly bridged macrocyclic-phosphazene compound 4. The phenomenon of doubling of the (31)P NMR signals of the meso form of singly bridged cyclotriphosphazatrienes, 1a-c and 3, is explained by consideration of the equilibrium in solution of independent complexation of a chiral ligand with molecules that have two chiral cyclophosphazene moieties separated by an achiral spacer group. The results show that the stereogenicity of such diastereoisomeric molecules in solution cannot be characterized unequivocally by NMR measurements on addition of either CSR or CSA.     

Flow and heat transfer with prescribed skin friction in a rotating fluid

This paper investigates the rotating flow and heat transfer of a viscous fluid induced by a stretching surface. The nonlinear problem subject to a given skin friction at the boundary is solved. Analytic solution is obtained using homotopy analysis method. The velocity, temperature, and stretching velocity is calculated for different values of the rotation parameter (λ). The obtained results are compared with the well known results of rotating flow induced by a stretching surface by using four sets of boundary conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Simultaneous effects of induced magnetic field and heat and mass transfer on the peristaltic motion of second‐order fluid in a channel

In this article, we investigate the influence of heat and mass transfer on the peristaltic flow of magnetohydrodynamic second‐order fluid in a channel when the induced magnetic field effects are present. Problem formulation in a wave frame of reference is presented. The governing nonlinear analysis is carried out under the assumption of small wave number. Explicit expressions of the pressure gradient, the stream function, the magnetic force function, the axial induced magnetic field, the current density distribution, the temperature, and the concentration distribution are derived. The effects of embedded parameters are also examined. Copyright © 2011 John Wiley & Sons, Ltd.     

Melting heat transfer in the stagnation‐point flow of an upper‐convected Maxwell (UCM) fluid past a stretching sheet

The steady laminar boundary layer flow and heat transfer past a stretching sheet arre considered. Upper‐convected Maxwell (UCM) fluid is treated as a rheological model. The resulting nonlinear differential system is solved by homotopy analysis method (HAM). The influence of melting parameter (M), Prandtl number (Pr), Deborah number (β) and stretching ratio (A = a/c) on the velocity and temperature profiles is thoroughly examined. It is noticed that fields are effected appreciably with the variation of parameters. Furthermore, it is seen that the local Nusselt number is a decreasing function of melting parameter. Copyright © 2011 John Wiley & Sons, Ltd.     

Analytical and numerical solution for viscous dissipation effect on the heat transfer in a deformable channel

In this paper, shooting method and homotopy perturbation technique are applied for the flow analysis of temporal energy transport in a deformation channel with isothermal walls. An incompressible viscous fluid fills the space inside the channel. Analytical and numerical solutions are developed for the momentum and energy equations. The viscous dissipation effects are taken into account. Graphs for pertinent flow parameters are sketched and discussed. Comparison between the analytical and numerical solutions indicates an excellent agreement. It is noticed that behaviors of Prandtl and Eckert numbers on the temperature are qualitatively similar. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and Spectroscopic Studies of N,N’-dialkyl Derivatives of Antisymmetrical 2H,5H-Dihydropyrrolo[3,4-c]pyrrole-1,4-diones

2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione derivatives (DPP) are chemically stable, fluorescent molecules, known as High Performance Pigments. Preparation of the soluble derivatives of DPPs provides great advantage in designing the optic sensor for new and existing applications and overcoming aggregation problems in solid matrices. For this purpose, the synthesis of antisymmetric DPPs and the formation of new organic dyes through N,N’-dialkylation and their spectroscopic studies have been carried out both in solutions and in solid phase.     

Offline estimation of 2D crystal lattice parameters by processing the electron diffraction image

Electron diffraction provides useful information about the internal composition of materials and has been in the use of material scientists for more than fifty years. In order to extract useful information from offline diffraction images, they are manually analyzed by using some photometric technique. Manual analysis is however a cumbersome, laborious and difficult task. To reduce the labors of material scientists one can employ image processing techniques to perform automated analysis, due to the well established popularity and clear evidence of widely used image processing techniques. In this work an image processing technique is being proposed for the extraction of 2D unit cell information from diffraction images on one hand and finding the 2D point group contained by the lattices on the other. The technique employs a morphological shrinking operation to find the center of each spot in the underlying preprocessed diffraction image. This is followed by the extraction of eight points with reference to the spot produced by the transmitted electron beam. The resultant nine points, i.e. the extracted eight plus the reference spot generated by the transmitted electron beam, are then subjected to symmetry operations, rotation symmetry and mirror symmetry, in polar coordinate system, to classify the point group of the lattice produced by the electron diffraction. One of the difficult task, even in manual analysis, is to ascertain the exact spot where the transmitted electron beam hit the sample at the time of realization of the image. This has been accurately and intuitively done by employing the notion that the transmitted spot must have greater number of pixels, with the highest gray value, among the diffracted spots. The proposed strategy has been applied to a sample set of various images and the results shows that the technique is efficient in determining the unit cell in 2D and classify the point group with good accuracy.     

Mixed convection unsteady stagnation point flow over a stretching sheet with heat transfer in the presence of variable free stream

An analysis is performed for the unsteady mixed convection flow of an incompressible viscous fluid about a stagnation point on a stretching sheet in the presence of a variable free stream. The equations of motion and energy are transformed into the ordinary differential equations by using similarity transformations. Homotopy analysis method is used for the solution of the governing problem. The results have been discussed by plots. The present values of the function are shown very close to the previous limiting solutions. Copyright © 2011 John Wiley & Sons, Ltd.