Neural activity-induced modulation of BOLD poststimulus undershoot independent of the positive signal

Despite intense research on the blood oxygenation level-dependent (BOLD) signal underlying functional magnetic resonance imaging, our understanding of its physiological basis is far from complete. In this study, it was investigated whether the so-called poststimulus BOLD signal undershoot is solely a passive vascular effect or actively induced by neural responses. Prolonged static and flickering black-white checkerboard stimulation with isoluminant grey screen as baseline condition were employed on eight human subjects. Within the same region of interest, the positive BOLD time courses for static and flickering stimuli were identical over the entire stimulus duration. In contrast, the static stimuli exhibited no poststimulus BOLD signal undershoot, whereas the flickering stimuli caused a strong BOLD poststimulus undershoot. To ease the interpretation, we performed an additional study measuring both BOLD signal and cerebral blood flow (CBF) using arterial spin labeling. Also for CBF, a difference in the poststimulus period was found for the two stimuli. Thus, a passive blood volume effect as the only contributor to the poststimulus undershoot comes short in explaining the BOLD poststimulus undershoot phenomenon for this particular experiment. Rather, an additional active neuronal activation or deactivation can strongly modulate the BOLD poststimulus behavior. In summary, the poststimulus time course of BOLD signal could potentially be used to differentiate neuronal activity patterns that are otherwise indistinguishable using the positive evoked response.     

Static Headspace GC/MS Method for Determination of Methanol and Ethanol Contents,as the Degradation Markers of Solid Insulation Systems of Power Transformers

Methanol in insulating oil has been proposed as a new marker for condition assessment of the solid insulation system of power transformers. In the current work, as a first step of using the new marker, an analytical static headspace gas chromatography/mass spectrometry method has been developed, optimized, and validated to measure methanol and ethanol contents in the insulating mineral oil. The analyzing setup consists of a 6890 N gas chromatograph equipped with a 5973 network mass spectrometer (MS) in the absence of a costly headspace autosampler, and the chromatography separation was performed on a 60 m × 320 µm × 0.5 µm VF-WAXms GC column. Calibration curves have been provided using several concentrations of the alcohols, and also limit of detection (LOD), limit of quantification (LOQ), and relative standard deviation percentage (RSD%) have been determined.     

Modification of the GV-MSA model in obtaining the activity and osmotic coefficients of aqueous electrolyte solutions

In this work a modified form of the Ghotbi–Vera Mean Spherical Approximation model (MGV-MSA) has been used to correlate the mean ionic activity coefficients (MIAC) for a number of symmetric and asymmetric aqueous electrolyte solutions at 25 °C. In the proposed model the hard sphere as well as the electrostatic contributions to the MIAC and the osmotic coefficient of the previously GV-MSA model has been modified. The results of the proposed model for the MIAC of the electrolyte solutions studied in this work are used to directly calculate the values of the osmotic coefficients without introducing any new adjustable parameter. In the MGV-MSA model the cation diameter as well as the relative permittivity of water depends on the electrolyte concentration. Having considered such dependency for both cation and relative permittivity for water in an electrolyte solution the modification of the GV-MSA has been made. It should be stated that in the MGV-MSA model the anion diameter in the solution similar to that in the GV-MSA model remains constant and independent of the electrolyte concentration. The results obtained from the proposed model have been favorably compared with those of the GV-MSA model. The results showed that the MGV-MSA model can more accurately correlate the MIAC of the single electrolyte solutions than those of the GV-MSA model. The same comparison has been observed in case of the osmotic coefficients for the electrolyte solutions studied in this work. It should be noted that in order to do an unequivocal comparison between the results obtained from the models used in this work the same minimization procedure and the same experimental data for the MIAC and the osmotic coefficients have been used. Also it should be mentioned that in the MGV-MSA model the conversion from the McMillan–Mayer (MM) framework to that of the Lewis–Randall (LR) has been performed. It has been concluded that such transformation can affect the results in particular at higher electrolyte concentrations.     

Amine‐Directed Hydrogen‐Bonded Two‐Dimensional Supramolecular Structures

Utilizing pure amine hydrogen bonding is a novel approach for constructing two‐dimensional (2D) networks. Further, such systems are capable of undergoing structural modifications due to changes in pH. In this study, we designed a 2D network of triaminobenzene (TAB) molecules that by varying the pH from neutral to acidic, form either ordered or disordered structures on Au(111) surface as revealed in scanning tunneling microscopy images. In near‐neutral solution (pH ≈5.5), protonation of TAB generates charged species capable of forming H‐bonds between amine groups of neighboring molecules resulting in the formation of a 2D supramolecular structure on the electrified surface. At lower pH, due to the protonation of the amine groups, intermolecular hydrogen bonding is no longer possible and no ordered structure is observed on the surface. This opens the possibility to employ pH as a chemical trigger to induce a phase transition in the 2D molecular network of triaminobenzene molecules.     

Single‐Molecule Sensing of Environmental pH—an STM Break Junction and NEGF‐DFT Approach

Sensors play a significant role in the detection of toxic species and explosives, and in the remote control of chemical processes. In this work, we report a single‐molecule‐based pH switch/sensor that exploits the sensitivity of dye molecules to environmental pH to build metal–molecule–metal (m‐M‐m) devices using the scanning tunneling microscopy (STM) break junction technique. Dyes undergo pH‐induced electronic modulation due to reversible structural transformation between a conjugated and a nonconjugated form, resulting in a change in the HOMO–LUMO gap. The dye‐mediated m‐M‐m devices react to environmental pH with a high on/off ratio (≈100:1) of device conductivity. Density functional theory (DFT) calculations, carried out under the non‐equilibrium Green’s function (NEGF) framework, model charge transport through these molecules in the two possible forms and confirm that the HOMO–LUMO gap of dyes is nearly twice as large in the nonconjugated form as in the conjugated form.     

In vivo imaging of intrinsic optical signals in chicken retina with functional optical coherence tomography

Visually evoked intrinsic optical signals (IOSs) were measured in vivo for the first time to our knowledge from all retina layers of the chicken retina with a combined functional optical coherence tomography and electroretinography (ERG) system. IOS traces were recorded from a small volume in the retina with 3.5 μm axial resolution and 7 ms time resolution. Comparison of the IOS and ERG traces shows a correlation between the positive and negative IOS measured from different retinal layers and the timing of the a and b waves in the ERG recording.     

Synthesis,X‐ray Studies,and Catalytic Efficacy of a Novel Iron Complex Containing an N,O‐Type Bidentate Thiazoline Ligand

The reactions of FeCl₃ · 6H₂O and 2‐(2′‐hydroxyphenyl)‐2‐thiazoline as a bidentate O‐N donor thiazoline ligand (thoz) afford a five‐coordinate Fe^III complex [Fe(thoz)₂Cl] with a distorted square pyramidal configuration. Complex [Fe(thoz)₂Cl] was isolated as air‐stable crystalline solids and fully characterized, including by single‐crystal X‐ray structure analysis. Complex [Fe(thoz)₂Cl] shows very efficient reactivity in the oxidation of sulfides to their corresponding sulfoxides using urea hydrogen peroxide (UHP) as the oxidant at room temperature in air.     

Image subtraction approach to screening one-bead-one-compound combinatorial libraries with complex protein mixtures

To screen one-bead-one-compound (OBOC) combinatorial bead libraries,(1) one generally uses tagged purified protein as the screening probe. Compound beads that interact with the purified protein are then identified, for example, via an enzyme-linked colorimetric assay, and isolated for structure determination. In this report, we demonstrate a rapid and efficient method to screen OBOC combinatorial libraries utilizing two protein mixtures as screening probes, and by comparing optical images of the beads stained by one protein mixture but not the other, ligand beads unique to one of the two protein mixtures can be identified. The significance of this method is that it allows for rapid selection of ligands directed against proteins unique to one mixture while screening out positive beads resulting from proteins common to both mixtures as well as beads that are positive as a result of interactions with chemical and protein components found in the assay itself. The method is fast, efficient, and uses off-the-shelf equipment.     

Anisotropic Conductivity at the Single‐Molecule Scale

In most junctions built by wiring a single molecule between two electrodes, the electrons flow along only one axis: between the two anchoring groups. However, molecules can be anisotropic, and an orientation‐dependent conductance is expected. Here, we fabricated single‐molecule junctions by using the electrode potential to control the molecular orientation and access individual elements of the conductivity tensor. We measured the conductance in two directions, along the molecular plane as the benzene ring bridges two electrodes using anchoring groups (upright) and orthogonal to the molecular plane with the molecule lying flat on the substrate (planar). The perpendicular (planar) conductance is about 400 times higher than that along the molecular plane (upright). This offers a new method for designing a reversible room‐temperature single‐molecule electromechanical switch that controllably employs the electrode potential to orient the molecule in the junction in either “ON” or “OFF” conductance states.