Modification of the GV-MSA model in obtaining the activity and osmotic coefficients of aqueous electrolyte solutions

In this work a modified form of the Ghotbi–Vera Mean Spherical Approximation model (MGV-MSA) has been used to correlate the mean ionic activity coefficients (MIAC) for a number of symmetric and asymmetric aqueous electrolyte solutions at 25 °C. In the proposed model the hard sphere as well as the electrostatic contributions to the MIAC and the osmotic coefficient of the previously GV-MSA model has been modified. The results of the proposed model for the MIAC of the electrolyte solutions studied in this work are used to directly calculate the values of the osmotic coefficients without introducing any new adjustable parameter. In the MGV-MSA model the cation diameter as well as the relative permittivity of water depends on the electrolyte concentration. Having considered such dependency for both cation and relative permittivity for water in an electrolyte solution the modification of the GV-MSA has been made. It should be stated that in the MGV-MSA model the anion diameter in the solution similar to that in the GV-MSA model remains constant and independent of the electrolyte concentration. The results obtained from the proposed model have been favorably compared with those of the GV-MSA model. The results showed that the MGV-MSA model can more accurately correlate the MIAC of the single electrolyte solutions than those of the GV-MSA model. The same comparison has been observed in case of the osmotic coefficients for the electrolyte solutions studied in this work. It should be noted that in order to do an unequivocal comparison between the results obtained from the models used in this work the same minimization procedure and the same experimental data for the MIAC and the osmotic coefficients have been used. Also it should be mentioned that in the MGV-MSA model the conversion from the McMillan–Mayer (MM) framework to that of the Lewis–Randall (LR) has been performed. It has been concluded that such transformation can affect the results in particular at higher electrolyte concentrations.     

Enantioselective total syntheses of manzamine a and related alkaloids

As a prelude to undertaking the total syntheses of the complex manzamine alkaloids, a series of model studies were conducted to establish the scope and limitations of intramolecular [4 + 2] cycloadditions of N-acylated vinylogous ureas with the trienic substrates 17a,b, 28a,b, and 34. These experiments clearly demonstrated that the geometry of the internal double bond and the presence of an electron-withdrawing group on the diene moiety were essential for the facile and stereoselective formation of the desired cycloadducts. The enantioselective syntheses of the manzamine alkaloids ircinol A (75), ircinal A (5), and manzamine A (1) were then completed by employing a convergent strategy that featured a novel domino Stille/Diels-Alder reaction to construct the tricyclic ABC ring core embodied in these alkaloids. Thus, the readily accessible chiral dihydropyrrole 58 was first converted in a single chemical operation into the key tricyclic intermediate 60. Two ring-closing metathesis reactions were then used to form the 13- and 8-membered rings leading to Z-72 and 74, the latter of which was quickly elaborated into ircinal A (5) via ircinol A (75). The synthetic 5 thus obtained was converted into manzamine A (1) following literature precedent. This concise synthesis of ircinal A required a total of 24 operations from commercially available starting materials with the longest linear sequence being 21 steps.     

Rate and Computational Studies for Pd-NHC-Catalyzed Amination with Primary Alkylamines and Secondary Anilines: Rationalizing Selectivity for Monoarylation versus Diarylation with NHC Ligands

The relative rates of arylation of primary alkylamines with different Pd-NHC catalysts have been measured, as have the relative rates of arylation of the secondary aniline product in an attempt to understand the key ligand design features necessary to have high selectivity for the monoarylated amine product. As the substituents on the N-aryl ring of the NHC increase in size, selectivity for monoarylation increases and this is further enhanced by chlorinating the back of the NHC ring. Computations have been performed on the catalytic cycle of this transformation in order to understand the selectivity obtained with the different catalysts.     

Synthesis,X‐ray Studies,and Catalytic Efficacy of a Novel Iron Complex Containing an N,O‐Type Bidentate Thiazoline Ligand

The reactions of FeCl₃ · 6H₂O and 2‐(2′‐hydroxyphenyl)‐2‐thiazoline as a bidentate O‐N donor thiazoline ligand (thoz) afford a five‐coordinate Fe^III complex [Fe(thoz)₂Cl] with a distorted square pyramidal configuration. Complex [Fe(thoz)₂Cl] was isolated as air‐stable crystalline solids and fully characterized, including by single‐crystal X‐ray structure analysis. Complex [Fe(thoz)₂Cl] shows very efficient reactivity in the oxidation of sulfides to their corresponding sulfoxides using urea hydrogen peroxide (UHP) as the oxidant at room temperature in air.     

Protective Effects of Thymoquinone,an Active Compound of Nigella sativa,on Rats with Benzo(a)pyrene-Induced Lung Injury through Regulation of Oxidative Stress and Inflammation

Benzopyrene [B(a)P] is a well-recognized environmental carcinogen, which promotes oxidative stress, inflammation, and other metabolic complications. In the current study, the therapeutic effects of thymoquinone (TQ) against B(a)P-induced lung injury in experimental rats were examined. B(a)P used at 50 mg/kg b.w. induced lung injury that was investigated via the evaluation of lipid profile, inflammatory markers, nitric oxide (NO), and malondialdehyde (MDA) levels. B(a)P also led to a decrease in superoxide dismutase (SOD) (34.3 vs. 58.5 U/mg protein), glutathione peroxidase (GPx) (42.4 vs. 72.8 U/mg protein), catalase (CAT) (21.2 vs. 30.5 U/mg protein), and total antioxidant capacity compared to normal animals. Treatment with TQ, used at 50 mg/kg b.w., led to a significant reduction in triglycerides (TG) (196.2 vs. 233.7 mg/dL), total cholesterol (TC) (107.2 vs. 129.3 mg/dL), and inflammatory markers and increased the antioxidant enzyme level in comparison with the group that was administered B(a)P only (p < 0.05). B(a)P administration led to the thickening of lung epithelium, increased inflammatory cell infiltration, damaged lung tissue architecture, and led to accumulation of collagen fibres as studied through haematoxylin and eosin (H&E), Sirius red, and Masson’s trichrome staining. Moreover, the recognition of apoptotic nuclei and expression pattern of NF-κB were evaluated through the TUNEL assay and immunohistochemistry, respectively. The histopathological changes were found to be considerably low in the TQ-treated animal group. The TUNEL-positive cells increased significantly in the B(a)P-induced group, whereas the TQ-treated group showed a decreased apoptosis rate. Significantly high cytoplasmic expression of NF-κB in the B(a)P-induced group was seen, and this expression was prominently reduced in the TQ-treated group. Our results suggest that TQ can be used in the protection against benzopyrene-caused lung injury.     

Single‐Molecule Sensing of Environmental pH—an STM Break Junction and NEGF‐DFT Approach

Sensors play a significant role in the detection of toxic species and explosives, and in the remote control of chemical processes. In this work, we report a single‐molecule‐based pH switch/sensor that exploits the sensitivity of dye molecules to environmental pH to build metal–molecule–metal (m‐M‐m) devices using the scanning tunneling microscopy (STM) break junction technique. Dyes undergo pH‐induced electronic modulation due to reversible structural transformation between a conjugated and a nonconjugated form, resulting in a change in the HOMO–LUMO gap. The dye‐mediated m‐M‐m devices react to environmental pH with a high on/off ratio (≈100:1) of device conductivity. Density functional theory (DFT) calculations, carried out under the non‐equilibrium Green’s function (NEGF) framework, model charge transport through these molecules in the two possible forms and confirm that the HOMO–LUMO gap of dyes is nearly twice as large in the nonconjugated form as in the conjugated form.     

Orientation‐Controlled Single‐Molecule Junctions

The conductivity of a single aromatic ring, perpendicular to its plane, is determined using a new strategy under ambient conditions and at room temperature by a combination of molecular assembly, scanning tunneling microscopy (STM) imaging, and STM break junction (STM‐BJ) techniques. The construction of such molecular junctions exploits the formation of highly ordered structures of flat‐oriented mesitylene molecules on Au(111) to enable direct tip/π contacts, a result that is not possible by conventional methods. The measured conductance of Au/π/Au junction is about 0.1 G_o , two orders of magnitude higher than the conductance of phenyl rings connected to the electrodes by standard anchoring groups. Our experiments suggest that long‐range ordered structures, which hold the aromatic ring in place and parallel to the surface, are essential to increase probability of the formation of orientation‐controlled molecular junctions.     

3D Printing in analytical sample preparation

In the last 5 years, additive manufacturing (three‐dimensional printing) has emerged as a highly valuable technology to advance the field of analytical sample preparation. Three‐dimensional printing enabled the cost‐effective and rapid fabrication of devices for sample preparation, especially in flow‐based mode, opening new possibilities for the development of automated analytical methods. Recent advances involve membrane‐based three‐dimensional printed separation devices fabricated by print‐pause‐print and multi‐material three‐dimensional printing, or improved three‐dimensional printed holders for solid‐phase extraction containing sorbent bead packings, extraction disks, fibers, and magnetic particles. Other recent developments rely on the direct three‐dimensional printing of extraction sorbents, the functionalization of commercial three‐dimensional printable resins, or the coating of three‐dimensional printed devices with functional micro/nanomaterials. In addition, improved devices for liquid–liquid extraction such as extraction chambers, or phase separators are opening new possibilities for analytical method development combined with high‐performance liquid chromatography. The present review outlines the current state‐of‐the‐art of three‐dimensional printing in analytical sample preparation.