Metal‐Free Triplet Phosphors with High Emission Efficiency and High Tunability

Design of highly efficient phosphorescent emitters based on metal‐ and heavy atom‐free boron compounds has been demonstrated by taking advantage of the singlet fission process. The combination of a suitable molecular scaffold and appropriate electronic nature of the substituents has been utilized to tailor the phosphorescence emission properties in solution, neat solid, and in doped PMMA thin films.     

The conducting polymer electrolyte based on polypyrrole-polyvinyl alcohol and its application in low-cost quasi-solid-state dye-sensitized solar cells

The effect of polypyrrole (PPy) on the polyvinyl alcohol (PVA)-potassium iodide (KI)-iodine (I₂) polymer electrolytes has been investigated and optimized to use in a dye-sensitized solar cell (DSSC). The different weight ratios of PVA: PPy (93: 2, 91: 4, 89: 6, 87: 8, and 85: 10 wt%) polymer electrolytes (PE) were prepared by solution casting. Structural, complex formation and surface roughness of the prepared electrolytes was confirmed by X-ray diffraction, FTIR, and atomic force microscopy (AFM) respectively. Conductivity plots of all polymer films showed increasing trend with temperature and concentration of PPy. The activation energy of the optimized system found to be 0.871 kJ mol^?1. UV-visible spectrum was adopted to characterize the absorption spectra of the material revealed that increase in the absorbance with increasing PPy content and shifting the absorbance maximum towards lower energy. The indirect band gap decreased from 3.78 to 2.14 eV and direct band gap decreased from 3.88 to 2.71 eV. The EIS analyses revealed the lower charge transfer resistance of 3.029 Ω cm² at the interface between CE and PE. The excellent performance was observed in the fabricated DSSCs using PVA (85%)/PPy (10%)/KI (5%)/I₂ polymer electrolyte with a short-circuit current density of 11.071 mA cm^?2, open-circuit voltage of 0.644 V, fill factor of 0.575, and photovoltaic conversion efficiency of 4.09% under the light intensity of 100 mW cm^?2. Hence, the PPy content in polymer electrolyte influences the remarkable performance of low-cost DSSC.     

Physicochemical properties of new cellulosic Artisdita hystrix leaf fiber

The characterization of new natural fiber is increasing due to its excellent properties. This drives investigators to create high performance composites. The present investigation was designed to study the physicochemical properties of fibers obtained from the leaf of the Artistida hystrix. The Artistida hystrix fibers (AHFs) had crystallinity index (44.85%), cellulose (59.54 wt%), hemicellulose (11.35 wt%), lignin (8.42 wt%), and density (540 kg m^?3). The tensile strength of AHFs was 440 ± 13.4 MPa with an average strain rate of 1.57 ± 0.04%. The calculated microfibril angle of AHFs was 12.64 ± 0.45°, which influenced the mechanical properties.     

Physicochemical properties of new cellulosic fibers from the bark of Acacia arabica

With the growing environmental consciousness toward carbon emissions, natural fibers are the best alternative and act as a substitute for synthetic fibers due to their potential properties. New cellulosic fibers were identified from Acacia arabica bark. This study aimed at understanding the characteristics of Acacia arabica fibers (AAFs) extracted from the bark of the A. arabica, and its physicochemical properties were examined by thermal stability analyses, X-ray diffraction, chemical constitutions, and Fourier transform infrared spectroscopy analysis. Cellulose content (68.1 wt%), density (1028 kg m^?3), and crystallinity index (51.72%) properties were identified.     

Physico-chemical properties of new cellulosic fibers from the bark of Acacia planifrons

Identification of new natural fibers is growing due to their superior properties and the impetus for researchers to develop high-performance composites. This investigation was aimed at understanding the physico-chemical properties of Acacia planifrons fibers (APFs). The crystalline structure of APFs was analyzed by X-ray diffraction, and the crystallinity index (65.38%) was calculated. The chemical functional group of APFs was confirmed by Fourier transform-infrared spectroscopy, the thermal stability measured by thermogravimetric analysis, and surface characterization established by atomic force microscopy. Taken together, all the properties of APFs can play a vital role in establishing APFs as new reinforcement in polymer composites.     

Chlorination of 2-phenoxypropanoic acid with NCP in aqueous acetic acid: using a novel ortho-para relationship and the para/meta ratio of substituent effects for mechanism elucidation

Rate constants were measured for the oxidative chlorodehydrogenation of (R,S)-2-phenoxypropanoic acid and nine ortho-, ten para- and five meta-substituted derivatives using (R,S)-1-chloro-3-methyl-2,6-diphenylpiperidin-4-one (NCP) as chlorinating agent. The kinetics was run in 50% (v/v) aqueous acetic acid acidified with perchloric acid under pseudo-first-order conditions with respect to NCP at temperature intervals of 5 K between 298 and 318 K, except at the highest temperature for the meta derivatives. The dependence of rate constants on temperature was analyzed in terms of the isokinetic relationship (IKR). For the 20 reactions studied at five different temperatures, the isokinetic temperature was estimated to be 382 K, which suggests the preferential involvement of water molecules in the rate-determining step. The dependence of rate constants on meta and para substitution was analyzed using the tetralinear extension of the Hammett equation. The parameter lambda for the para/meta ratio of polar substituent effects was estimated to be 0.926, and its electrostatic modeling suggests the formation of an activated complex bearing an electric charge near the oxygen atom belonging to the phenoxy group. A new approach is introduced for examining the effect of ortho substituents on reaction rates. Using IKR-determined values of activation enthalpies for a set of nine pairs of substrates with a given substituent, a linear correlation is found between activation enthalpies of ortho and para derivatives. The correlation is interpreted in terms of the selectivity of the reactant toward para- or ortho-monosubstituted substrates, the slope of which being related to the ortho effect. This slope is thought to be approximated by the ratio of polar substituent effects from ortho and para positions in benzene derivatives. Using the electrostatic theory of through-space interactions and a dipole length of 0.153 nm, this ratio was calculated at various positions of a charged reaction center along the benzene C1-C4 axis, being about 2.5 near the ring and decreasing steeply with increasing distance until reaching a minimum value of -0.565 at 1.3 nm beyond the aromatic ring. Activation enthalpies and entropies were estimated for substrates bearing the isoselective substituent in either ortho and para positions, being demonstrated that they are much different from the values for the parent substrate. The electrophilic attack on the phenolic oxygen atom by the protonated chlorinating agent is proposed as the rate-determining step, this step being followed by the fast rearrangement of the intermediate thus formed, leading to products containing chlorine in the aromatic ring.     

Substituent and solvent effects on electronic absorption spectra of some N-(substitutedphenyl)benzene sulphonamides

The effects of substituents and solvents have been studied through the absorption spectra of nearly 23 ortho- and para-N-(substitutedphenyl)benzene sulphonamides in the range of 200-400 nm. The effects of substituents on the absorption spectra of compounds under present investigation are interpreted by correlation of absorption frequencies with simple and extended Hammett equations. Effect of solvent polarity and hydrogen bonding on the absorption spectra are interpreted by means of Kamlet equation and the results are discussed.     

Convenient synthesis and NMR spectral studies of variously substituted <Emphasis Type="Italic">N</Emphasis>-methylpiperidin-4-one-<Emphasis Type="Italic">O</Emphasis>-benzyloximes

Abstract  A series of variously substituted N-methylpiperidin-4-one-O-benzyloximes were synthesized by three different methods. Among them, the direct conversion of 2,6-diarylpiperidin-4-ones into the corresponding oxime ethers (method A) was proved to be better than the other two methods in the sense of good yield, convenience, easy work-up and quick reaction time. All the synthesized compounds are characterized by IR, Mass and NMR (¹H NMR, ¹³C NMR, ¹H-¹H COSY, ¹H-¹³C COSY and HMBC) spectral studies. The conformational preference of the synthesized oxime ethers with/without alkyl and aryl substituents at C-3/C-5 and C-2/C-6 is discussed using the spectral data. The observed chemical shifts and coupling constants suggest that the synthesized oxime ethers adopt chair conformation with equatorial orientation of all the substituents, whereas 1-methyl-3-isopropyl-2,6-diphenylpiperidin-4-one-O-benzyloxime also exists in boat conformation. Based on the NMR data, the effects of oximination on ring carbons and their associated protons and alkyl substituents are discussed. In addition, the effect of NMe group on the 2,6-diarylpiperidin-4-one-O-benzyloximes was also studied. Graphical abstract        

The effect of γ-ray-irradiated conducting polymer electrolyte and its application of dye-sensitized solar cells to building window glass system

Journal of Solid State Electrochemistry - In the present study, γ-ray-irradiated and un-irradiated PVA/PPy/KI/I2 conducting polymer electrolytes have been prepared for dye-sensitized solar...     

β‐Iminoenamine‐BF2 Complexes: Aggregation‐Induced Emission and Pronounced Effects of Aliphatic Rings on Radiationless Deactivation

The synthesis, photophysical, and electrochemical attributes of a novel class of boron difluorides containing an aromatic‐fused alicyclic/hetero‐alicyclic ring built on a β‐iminoenamine chromophoric backbone are reported. The compounds displayed large Stokes shifts (86–121 nm), and were emissive in the solid state. The quantum yields obtained in solution at room temperature were unusually lower by an order of magnitude compared to those in the solid state. Some of the tested compounds displayed aggregation‐induced emission (AIE). Single crystal XRD analyses revealed a lack of interplanar π–π interactions, which are presumed to be absent owing to non‐planarity of the alicyclic component in the molecule. For most of the studied compounds, time‐dependent DFT (TD‐DFT) calculations invariably reveal intramolecular charge transfer (π–π*) characteristics with the frontier orbitals concentrated on the boron–nitrogen heterocycle. The participation of boron and fluorine atoms was found to be negligible.