Initial Corrosion Characteristics of Enamel Coated Carbon Steel in Hot Tap Water

Russian Journal of Electrochemistry - The corrosion behavior of enamel coating on carbon steel was investigated in the tap water at 80°C (i.e., the simulated electric hot water tank...     

高效固体酸SBA-15-Zr(OTf)3催化胺或醇开环环氧化合物

通过简单的一锅两步法制备了三氟金属(铝,钛,锆)接枝介孔SBA-15 (AlTf/S,TiTf/S,ZrTf/S)固体酸材料,并通过XRD,N2吸附,TGA,FTIR,原位吡啶FTIR和元素分析对这些材料进行了详细的表征.其中,ZrTf/S能够高效催化环氧化物温和条件下被胺或醇开环生成对应β-氨基醇或β-烷氧基醇,并且催化剂能循环利用.ZrTf/S相较于AlTf/S和TiTf/S酸性最强,因而催化活性也最高.     

Co-N/m-C高效催化空气下醇直接氧化成酯

酯类在有机合成中作为基础材料广泛地应用于精细化学品, 农用化学品, 药物等的生产中. 传统生产酯的方法需要用到羧酸, 酸酐, 酰卤或酮类, 并经过多步反应完成. 往往会造成原材料的浪费, 并伴随副产物的产生. 因此用醇代替酸或其衍生物与另一种醇反应直接氧化酯化合成相应的酯具有很大的经济意义. 目前已有基于贵金属(如钌, 钯和金)的将醇类直接氧化为酯类的催化剂的研究, 但是贵金属的价格及其有限的资源限制了其在实际生产中的应用. 从经济发展和环境保护的角度出发, 开发基于非贵金属的用于醇氧化酯化的催化剂有重要意义.近年来, 碳材料由于成本低? 稳定性高? 电化学性能优异的特点而广泛应用于材料? 化学催化和电化学催化等领域. 此外, 杂原子和金属的引入可以在一定程度上调节材料的组成, 电子结构和表面物理化学性质而进一步构建新的活性位点, 增强碳材料的催化性能. 另外, 由于多孔碳材料具有较大的比表面积和多样的孔结构, 作为催化剂载体比普通碳材料更优越, 使得底物更容易接触活性部位, 同时提高氧的传输能力. 然而, 活性钴物种因在热解过程中容易发生团聚而使原子催化效率降低. 因此设计和制备高分散且高效的催化剂对于实现醇氧化为酯有重要意义.钴基氮掺杂碳材料是一种有潜力的能将醇直接氧化到酯的经济, 高效, 环保的催化剂. 本文提出了一种方便, 快捷, 高效的醇直接氧化成酯的方法, 即利用直接热解大分子前驱体制备钴改性N掺杂介孔碳材料(Co-N/m-C), 用于醇直接氧化成酯反应中, 其中以900 oC下焙烧所制的催化剂活性最高. 该催化剂对于苯甲醇直接有氧氧化成苯甲酸甲酯反应的TOF值高达107.6 h?1, 远高于目前所报道的过渡金属基纳米催化剂的, 这得益于超分散钴物种与材料中吡啶氮之间的强配位作用及大的介孔比表面积. 对于不同结构的醇, 包括苄基醇, 烯丙基醇和杂环醇, 也能高收率地得到相应酯, 说明该催化剂具有普适性. 另外, Co-N/m-C-900催化剂经循环使用六次后没有显著的活性损失, 表明了该催化剂具有一定的稳定性.     

Two-dimensional DFB laser fabricated on dye-doped hybrid zirconia film by soft lithography

A two-dimensional(2D) distributed feedback(DFB) structure is fabricated on dye-doped sol-gel derived hybrid zirconia films by soft lithography.The Q-switched Nd:YAG laser(λ = 532 nm) is used to pump these structures.The lasing emissions of the gain medium doped with Rhodamine 6G(Rh6G) in two perpendicular directions are shown,and the threshold pump energy is measured.     

Analysis of Volatile Compounds in Radix Bupleuri Injection by GC–MS–MS

Static headspace sampling, headspace solid-phase microextraction, and direct immersion solid-phase microextraction coupled with gas chromatography–tandem mass spectrometry have been developed for determination of the volatile components in Radix bupleuri injection. A total of 78 compounds were identified from Radix bupleuri injection. Direct immersion solid-phase microextraction gave a better extraction efficiency for polar compounds, including organic acids and alcohols, than headspace solid-phase microextraction or static headspace sampling. Product ion isotope pattern analysis was applied to determine the elemental composition of the precursor ion, which could make the qualitative analysis more accurate and reliable.     

Lipid profiling of cyanobacteria Synechococcus sp. PCC 7002 using two‐dimensional liquid chromatography with quadrupole time‐of‐flight mass spectrometry

Glycerolipid is a main component of membranes in oxygenic photosynthetic organisms. Up to now, the majority of publication in this area has focused on the physiological functions of glycerolipids and lipoprotein complexes in photosynthesis, but the study on the separation and identification of glycerolipids in thylakoid membrane in cyanobacteria is relatively rare. Here we report a new method to separate and identify five photosynthetic glycerolipid classes, including monoglucosyl diacylglycerol, monogalactosyl diacylglycerol, digalactosyl diacylglycerol, sulfoquinovosyl diacylglycerol, and phosphatidylglycerol, in cyanobacteria Synechococcus sp. PCC 7002 by two‐dimensional (normal‐ and reversed‐phase) liquid chromatography online coupled to quadrupole time‐of‐flight mass spectrometry. Over twice as many lipid species were detected by our method compared to the previously reported methods. Ten new odd‐chain fatty acid glycerolipids were discovered for the first time. Moreover, complete separation of isomers of monogalactosyl diacylglycerol and monoglucosyl diacylglycerol was achieved. According to the tandem mass spectrometry results, we found that the head group of monoglucosyl diacylglycerols was not as stable as that of monogalactosyl diacylglycerols, which might explain why the organism chose monogalactosyl diacylglycerols and digalactosyl diacylglycerols instead of monoglucosyl diacylglycerols as the main content of the photosynthetic membranes in the history of evolution. This work will benefit further research on the physiological function of glycerolipids.     

Synthesis, structures, cellular uptake and apoptosis-inducing properties of highly cytotoxic ruthenium-Norharman complexes

Three novel Ru(II) complexes of the general formula [Ru(N-N)(2)(Norharman)(2)](SO(3)CF(3))(2), where N-N = 2,2'-bipyridine (bpy, 1), 1,10-phenanthroline (phen, 2), 4,7-diphenyl-1,10-phenanthroline (DIP, 3) and Norharman (9H-pyrido[3,4-b]indole) is a naturally occurring β-carboline alkaloid, have been synthesized and characterized. The molecular structures of 1 and 2 have been determined by X-ray diffraction analysis. The cellular uptake efficiencies, in vitro cytotoxicities and apoptosis-inducing properties of these complexes have been extensively explored. Notably, 1-3 exhibit potent antiproliferative activities against a panel of human cancer cell lines with IC(50) values lower than those of cisplatin. Further studies show that 1-3 can cause cell cycle arrest in the G0/G1 phase and induce apoptosis through mitochondrial dysfunction and reactive oxygen species (ROS) generation. In vitro DNA binding studies have also been conducted to provide information about the possible mechanism of action.     

A Single -Longitudinal-Mode Nd:Ce:YAG <Emphasis Type="Italic">Q</Emphasis>-Switched Laser Based on a Three-Plan Resonant Reflector

We present an efficient and compact passively Q-switched flash-lamp-pumped Nd:Ce:YAG singlelongitudinal-mode (SLM) laser system. With Cr⁴⁺:YAG as a saturable absorber, we design a three-plan resonant reflector for generating smooth SLM Q-switched pulses. We provide a theoretical calculation and optimization of the resonant reflector for improving the longitudinal-mode selection ability. We obtain a stable SLM output with a single-pulse energy of 10 mJ and a pulse width of 10.7 ns at 10 Hz. The near-diffraction-limited beam-quality parameter M² is less than 1.5. The system can operate with a repetition rate from 1 to 10 Hz. We achieve the stable laser operation with less than 3% fluctuation of the pulse energy within 10,000 shots.