Ag+ ion transport studies in a polyvinyl alcohol-based polymer electrolyte system

Thick films of pure polyvinyl alcohol and polyvinyl alcohol doped with silver nitrate with different compositions have been prepared by solution cast technique. The FT-IR spectrum confirms the complexation process. The conductivity of the pure polyvinyl alcohol is of the order of 10⁻⁷ Sm⁻¹ at 90 °C, and its value increases by two orders of magnitude when doped with 20 wt% of AgNO₃. The activation energy, calculated from the Arrhenius plot for all compositions of the poly vinyl alcohol doped with silver nitrate, is between 0.24 and 0.35 eV. The migration energy for the ion in polymer electrolyte has been calculated from the modulus spectrum, and is in good agreement with the activation energy calculated from the Arrhenius plot. The modulus spectra indicate the non-Debye nature of the material.     

A study on the radon concentration in water in Coonoor, India

The gas collection measurement method was employed to determine radon activity concentrations in the water of Coonoor. Open well water, dam water and stream water have been investigated for their radon concentrations. It is observed that the highest radon concentration is in the open well water and the lowest in stream water. From these measurements, the corresponding annual effective ingestion dose is determined.     

Eco-friendly biopolymer electrolyte,pectin with magnesium nitrate salt,for application in electrochemical devices

Journal of Solid State Electrochemistry - Current research on electrochemical device application focuses on the usage of biopolymers like chitosan, pectin, agar-agar, cellulose acetate, and...     

A study of a fast ionic conductor–Ag1−xCuxI

The Conductivity of AgI–CuI system has been studied. Two molar ratios of the system Ag_1–xCu_xI with x = 0.05 and 0.15 have been taken. The transition temperatures are observed with conductivity measurements.     

FT-IR and Raman Spectra of Ammonium Hydrogen Tartrate and Potassium Hydrogen Tartrate Crystals

FT-IR and Raman spectra of ammonium hydrogen tartrate [NH₄HC₄H₄O₆] and potassium hydrogen tartrate [KHC₄H₄O₆] have been measured. Vibrational assignments have been made for both the internal and external vibrations. Because of the free rotation of the NH₄⁺ ion, it forms only weak hydrogen bonds with the oxygen atom.     

Structural, thermal and electrical properties of PVA-LiCF3SO3 polymer electrolyte

The development of polymeric systems with high ionic conductivity is one of the main objectives in Li rechargeable battery. In the present study, the different composition of PVA-LiCF₃SO₃ polymer electrolyte has been prepared by solution cast technique using DMSO as solvent. The FTIR study confirms the polymer-salt complex formation. The amorphous nature of the polymer has been confirmed by XRD analysis. DSC measurements show decrease in T_g with increasing salt concentration. The temperature dependent conductivity obeys Arrhenius relationship. The maximum conductivity has been observed in the order of 7 × 10^− 4 S cm^− 1 for 25 mol% of LiCF₃SO₃. The activation energy has been found to be 0.16 eV. The two peaks have been observed in the dielectric loss spectrum which shows two types of relaxation α and β.     

Dielectric and conductivity relaxations in PVAc based polymer electrolytes

The polymer electrolytes composed of a blend of poly (vinyl acetate) (PVAc) and poly (methylmethacrylate) (PMMA) as a host polymer and LiClO₄ as a salt are prepared by a solution casting technique. The formation of blend polymer- salt complex has been confirmed by FT-IR spectral studies. The conductivity- temperature plots are found to follow an Arrhenius nature. Arrhenius plot shows the decrease in activation energy with the increase in salt concentration. The dielectric behaviour of the sample is analysed using dielectric permittivity (ε′), dielectric loss (ε″) and electric modulus (M″) of the samples. The impedance cole- cole plot shows the high frequency semi- circle is due to the bulk effect of the material and the depression in the semicircle shows the non-Debye nature of the material. The bulk conductivity is found to vary between 2.5×10⁻⁵ Scm⁻¹ to 1.7×10⁻³ Scm⁻¹ with the increase of salt concentration of blend polymer samples. The migration energy derived from the dissipation factor is almost equal to the activation energy calculated from conductivity. The modulus spectrum of the samples shows the non-Debye behaviour of the polymer electrolyte films. The low frequency dispersion of the dielectric constant implies the space charge effects arising from the electrodes. Paper presented at the 2nd International Conference on Ionic Devices, Anna University, Chennai, India, Nov. 28–30, 2003.     

Structural and electrical conductivity studies of Li x AlZr[PO4]3 (x = 1.8, 2.0, 2.2), solid electrolyte for lithium-rechargeable batteries

In the present study, Li _x AlZr[PO₄]₃ (x = 1.8, 2.0, 2.2) has been prepared by the Pechini-type polymerizable precursor method, and structural and electrical analyses have been performed. Formation of the compound has been confirmed from X-ray diffraction pattern. Vibrational analysis has been performed using Fourier transform infrared spectroscopy. Ion transport mechanism has been analyzed using the AC impedance technique. Electrical characterization reveals that the maximum conductivity (4.4 × 10^?5S cm^?1) has been observed for the sample Li_2.2AlZr[PO₄]₃ at 673K.     

Proton-conducting I-Carrageenan-based biopolymer electrolyte for fuel cell application

The essential part of electrochemical devices, such as fuel cells and batteries, is the polymer electrolyte with good mechanical, thermal, and chemical stability. The search for a new proton-conducting membrane with easy processability, non-toxic, and low-cost has been growing rapidly. The bio-based polymer electrolytes are now receiving much attention due to the green environment. Among the commercially available biopolymers, iota-Carrageenan (I-Carrageenan) is one of the biopolymer with good film-forming nature and with good mechanical stability. I-Carrageenan-based biopolymer membranes doped with ammonium bromide (NH₄Br) have been prepared using solution-casting technique, and distilled water is used as a solvent. The prepared I-Carrageenan-based biopolymer membranes have been characterized using FTIR, XRD, and AC impedance techniques. The complexation between the polymer and salt has been revealed by FTIR. The increase in the amorphous nature of the film due to the addition of salt has been confirmed by XRD. From AC impedance technique, the conductivity of pure I-Carrageenan has been found to be 1.46 × 10⁻⁵ S/cm. The addition of different wt% of NH₄Br increases the conductivity and reaches the highest value of 1.08 × 10⁻³ S/cm for 20% NH₄Br, and the conductivity decreases on further addition of NH₄Br due to the formation of ion aggregates.