Nanocomposite TiO2-f-MWCNTs as durable support for Pt in polymer electrolyte fuel cells

Journal of Solid State Electrochemistry - Durability is a major issue and has been the growing focus of research for the successful commercialization of polymer electrolyte fuel cells (PEFCs)....     

Pristine and graphitized-MWCNTs as durable cathode-catalyst supports for PEFCs

Long-term deterioration in the performance of PEFCs is attributed largely to reduction in active area of the platinum catalyst at cathode, usually caused by carbon-support corrosion. Multi-walled carbon-nanotubes (MWCNTs) as cathode-catalyst support are found to enhance long-term stability of platinum catalyst (Pt) in relation to non-graphitic carbon. In addition, highly graphitic MWCNTs (G-MWCNTs) are found to be electrochemically more stable than pristine MWCNTs. This is because graphitic-carbon-supported-Pt (Pt/MWCNTs) cathodes exhibit higher resistance to carbon corrosion in-relation to non-graphitic-carbon-supported-Pt (Pt/C) cathodes in PEFCs during accelerated stress-test (AST) as evidenced by chronoamperometry and carbon dioxide studies. The corresponding change in electrochemical surface area (ESA), cell performance, and charge-transfer resistance are monitored through cyclic voltammetry, cell polarization, and impedance measurements, respectively. The extent of crystallinity, namely amorphous or graphitic nature of the three supports, is examined by Raman spectroscopy. X-ray diffraction and transmission electron microscopy studies both prior and after AST suggest lesser deformation in catalyst layer and catalyst particles for Pt/G-MWCNTs and Pt/MWCNTs cathodes in relation to Pt/C cathodes, reflecting that graphitic carbon-support resists carbon corrosion and helps mitigating aggregation of Pt particles. It is also found that with increasing degree of graphitization, the electrochemical stability for MWCNTs increases due to the lesser surface defects.     

Influence of disorder on superconductivity in non-magnetic rare-earth nickel borocarbides

The effect of substitutional disorder on the superconducting properties of YNi₂B₂C was studied by partially replacing yttrium and nickel by Lu and Pt, respectively. For the two series of (Y, Lu)Ni₂B₂C and Y(Ni, Pt)₂B₂C compounds, the upper critical field H _c2(T) and the specific heat c _p(T, H) in the superconducting mixed state have been investigated. Disorder is found to reduce several relevant quantities such as T _c, the upper critical field H _c2(0) at T=0 and a characteristic positive curvature of H _c2(T) observed for these compounds near T _c. The H _c2(T) data point to the clean limit for (Y, Lu) substitutions and to a transition to the quasi-dirty limit for (Ni, Pt) substitutions. The electronic specific heat contribution γ(H) exhibits significant deviations from the usual linear γ(H) law. These deviations reduce with growing substitutional disorder but remain even in the quasidirty limit which is reached in the Y(Ni_1−x , Pt _x )₂B₂C samples for x=0.1.     

Durable electrocatalytic-activity of Pt-Au/C cathode in PEMFCs

Longevity remains as one of the central issues in the successful commercialization of polymer electrolyte membrane fuel cells (PEMFCs) and primarily hinges on the durability of the cathode. Incorporation of gold (Au) to platinum (Pt) is known to ameliorate both the electrocatalytic activity and stability of cathode in relation to pristine Pt-cathodes that are currently being used in PEMFCs. In this study, an accelerated stress test (AST) is conducted to simulate prolonged fuel-cell operating conditions by potential cycling the carbon-supported Pt-Au (Pt-Au/C) cathode. The loss in performance of PEMFC with Pt-Au/C cathode is found to be ～10% after 7000 accelerated potential-cycles as against ～60% for Pt/C cathode under similar conditions. These data are in conformity with the electrochemical surface-area values. PEMFC with Pt-Au/C cathode can withstand >10,000 potential cycles with very little effect on its performance. X-ray diffraction and transmission electron microscopy studies on the catalyst before and after AST suggest that incorporating Au with Pt helps mitigate aggregation of Pt particles during prolonged fuel-cell operations while X-ray photoelectron spectroscopy reflects that the metallic nature of Pt is retained in the Pt-Au catalyst during AST in comparison to Pt/C that shows a major portion of Pt to be present as oxidic platinum. Field-emission scanning electron microscopy conducted on the membrane electrode assembly before and after AST suggests that incorporating Au with Pt helps mitigating deformations in the catalyst layer.     

Non-resonant microwave absorption studies of superconducting MgB2 and MgB2 + MgO

Non-resonant microwave absorption (NRMA) studies of superconducting MgB₂ and a sample containing ∼10% by weight of MgO in MgB₂ are reported. The NRMA results indicate near absence of intergranular weak links in the pure MgB₂ sample. A linear temperature dependence of the lower critical field H _c1 is observed indicating a non-s wave superconductivity. However, the phase reversal of the NRMA signal which could suggest d wave symmetry is also not observed. In the MgB₂ + MgO sample, much larger low field dependent absorption is observed indicating the presence of intergranular weak links. The hysteretic behavior of NRMA is compared and contrasted in the two samples. In the pure MgB₂ sample, a large hysteresis is observed between the forward and the reverse scans of the magnetic field indicating strong pinning of flux lines. This hysteresis saturates a few degrees below T _c while in the MgB₂ + MgO sample, a much slower increase of hysteresis with decreasing temperature is observed, a signature of weaker pinning.