Evaluation of the Kushida Method of short-term earthquake prediction

Kushida and Kushida found that FM radio waves from stations at distances over-the-horizon are received before earthquakes. Based on this finding, since the mid-1990’s, the Kushidas have been practicing “Earthquake Precursor Detection Experiment”. The performance of the Kushida method during 2000–2003 has been evaluated by checking their predictions against the actual seismicity. During the period, there were 92 Kushida predictions mentioning the possibility of M ≥ 5.5 event, whereas there were 49 M ≥ 5.5 earthquakes in the Japanese region. If the criteria for successful prediction are set as: the errors in date is less than one day, epicentral position is roughly within specified area, and error in M is less than 0.5, the success rate was 20% and the alarm rate was 12%. If we relax the criteria to: the errors in dates within 10 days, epicenter within additional 100 km of specified area and the magnitude error less than 1.0, the success rate was 40% and the alarm rate was 27%. These rates may look insufficient for a practical prediction method. Considering, however, the fact that no other short-term prediction has ever been made in Japan so far it is a significant achievement. Moreover, it was found that in almost all failed predictions, meaningful signals were detected although the interpretations were incorrect. This indicates that the method is promising provided further investigation is carried out. The same evaluation at the M ≥ 6.0 level showed that the general performance was similar to the M ≥ 5.5 level, except that both success rate and alarm rate were lower at the M ≥ 6.0 level. If this unexpected finding is real, it might be inherent to the methodology using scattering of short-wave length radio waves as suggested by M. Hayakawa and may contain important information in understanding the earthquake physics and LAI-coupling. The results of the present study indicate strongly that the earthquake prediction research using anomalous transmission of VHF FM radio waves should be enhanced in parallel with complementary research in other frequency ranges.     

Amperometric biosensor based on reductive H2O2 detection using pentacyanoferrate-bound polymer for creatinine determination

Pentacyanoferrate-bound poly(1-vinylimidazole) (PVI[Fe(CN)₅]) was selected as a mediator for amperometric creatinine determination based on the reductive H₂O₂ detection. Creatinine amidohydrolase (CNH), creatine amidohydrolase (CRH), sarcosine oxidase (SOD), peroxidase (POD), and PVI[Fe(CN)₅] were crosslinked with poly(ethylene glycol) diglycidyl ether (PEGDGE) on a glassy carbon (GC) electrode for a creatinine biosensor fabrication. Reduction current was monitored at −0.1 V in the presence of creatinine and O₂. It is revealed that PVI[Fe(CN)₅] is suitable as a mediator for a bioelectrocatalytic reaction of POD, since PVI[Fe(CN)₅] neither reacts with reactants nor works as an electron acceptor of SOD. The amounts of PVI[Fe(CN)₅], PEGDGE, and enzymes were optimized toward creatinine detection. Nafion as a protecting film successfully prevented the enzyme layer from interferences. The detection limit and linear range in creatinine determination were 12 μM and 12–500 μM (R² = 0.993), respectively, and the sensitivity was 11 mA cm⁻² M⁻¹, which is applicable for urine creatinine tests. The results of the creatinine determination for four urine samples measured with this proposed method were compared with Jaffe method, and a good correlation was obtained between the results.     

Temperature dependence of methanol and ethanol vapor sorption in polyhedral oligomeric silsesquioxane (POSS) containing methacrylate membranes

This study aimed to determine the solubility and temperature dependence of methanol and ethanol vapor caused by the difference in the substituents of polyhedral oligomeric silsesquioxane (POSS)-containing polymethacrylate membranes and the spacer length between the backbone and POSS backbone. Vapor sorption of methanol and ethanol was measured at 25°C, 35°C, and 45°C for three kinds of POSS-containing polymer membranes, namely, poly(methacryl isobutyl POSS), poly(methacrylate isobutyl POSS), and poly(methacryl phenyl POSS). The primary structures of the three POSS-containing polymer chains were columnar. The solubility of alcohol vapor on the POSS-containing polymer membranes followed the mechanism of solid adsorption and not the general dissolution diffusion. The sorption amount at all three temperatures was related to the surface area of the cylindrical primary structure and the solid adsorption property of the alcohol molecule of the POSS substituent. The sorption amount increased because of the large surface area and adsorption property of alcohol molecules. Although a typical glassy polymer shows exothermic mixing and a rubbery polymer displays endothermic mixing, the sample with the POSS substituent of isobutyl group exhibited an unusual behavior of endothermic mixing despite being a glassy polymer.     

Geometrical Evolution and Formation of the Photoproduct in the Cycloreversion Reaction of a Diarylethene Derivative Probed by Vibrational Spectroscopy

The geometrical evolution of the reactant and formation of the photoproduct in the cycloreversion reaction of a diarylethene derivative were probed using time-resolved absorption spectroscopies in the visible to near-infrared and mid-infrared regions. The time-domain vibrational data in the visible region show that the initially formed Franck-Condon state is geometrically relaxed into the minimum in the excited state potential energy surface, concomitantly with the low-frequency coherent vibrations. Theoretical calculations indicate that the nuclear displacement in this coherent vibration is nearly parallel to that in the geometrical relaxation. Time-resolved mid-infrared spectroscopy directly detected the formation of the open-ring isomer with the same time constant as the decrease of the closed-ring isomer in the excited state minimum. This observation reveals that no detectable intermediate, in which the population is accumulated, is present between the excited closed-ring isomer and the open-ring isomer in the ground state.     

Dithienylethenes with a novel photochromic performance

Dithienylethenes with low decoloration quantum yields and thermal reversibility at high temperature above 100 degrees C were prepared. Introduction of bulky alkoxy substituents at 2- and 2'-positions of the thiophene rings strongly suppressed the cycloreversion quantum yields. The quantum yields were lower than 10(-3), and the photogenerated color remained stable enough under room light. On the other hand, the bulky alkoxy substituent decreased the thermal stability of the colored closed-ring isomers at high temperature. The color of the dithienylethene with cyclohexyloxy substituents faded out in less than 1 min at 160 degrees C.     

III–V quantum devices and circuits based on nanoscale Schottky gate control of hexagonal quantum wire networks

The concept, the present status, key issues and future prospects of a novel hexagonal binary decision diagram (BDD) quantum circuit approach for III–V quantum large-scale integrated circuits (QLSIs) are presented and discussed. In this approach, the BDD logic circuits are implemented on III–V semiconductor-based hexagonal nanowire networks controlled by nanoscale Schottky gates. The hexagonal BDD QLSIs can operate at delay-power products near the quantum limit in the quantum regime as well as in the many-electron classical regime. To demonstrate the feasibility of the present approach, GaAs Schottky wrap gate (WPG)-based single-electron BDD node devices and their integrated circuits were fabricated and their proper operations were confirmed. Selectively grown InGaAs sub-10 nm quantum wires and their hexagonal networks have been investigated to form high-density hexagonal BDD QLSIs operating in the quantum regime at room temperature.     

Synthesis of block and end‐functionalized polyesters by triflimide‐catalyzed ring‐opening polymerization of ε‐caprolactone, 1,5‐dioxepan‐2‐one,and rac‐lactide

The ring‐opening polymerization (ROP) of cyclic esters, such as ε‐caprolactone, 1,5‐dioxepan‐2‐one, and racemic lactide using the combination of 3‐phenyl‐1‐propanol as the initiator and triflimide (HNTf₂) as the catalyst at room temperature with the [monomer]₀/[initiator]₀ ratio of 50/1 was investigated. The polymerizations homogeneously proceeded to afford poly(ε‐caprolactone) (PCL), poly(1,5‐dioxepan‐2‐one) (PDXO), and polylactide (PLA) with controlled molecular weights and narrow polydispersity indices. The molecular weight determined from an ¹H NMR analysis (PCL, M_n,NMR = 5380; PDXO, M_n,NMR = 5820; PLA, M_n,NMR = 6490) showed good agreement with the calculated values. The ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analyses strongly indicated that the obtained compounds were the desired polyesters. The kinetic measurements confirmed the controlled/living nature for the HNTf₂‐catalyzed ROP of cyclic esters. A series of functional alcohols, such as propargyl alcohol, 6‐azido‐1‐hexanol, N‐(2‐hydroxyethyl)maleimide, 5‐hexen‐1‐ol, and 2‐hydroxyethyl methacrylate, successfully produced end‐functionalized polyesters. In addition, poly(ethylene glycol)‐block‐polyester, poly(δ‐valerolactone)‐block‐poly(ε‐caprolactone), and poly(ε‐caprolactone)‐block‐polylactide were synthesized using the HNTf₂‐catalyzed ROP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2455–2463     

Triangulations on Closed Surfaces Covered by Vertices of Given Degree

A triangulation of a closed surface is said to be d-covered if all of its edges are covered by vertices of degree d. We shall give constructive characterizations of 5- and 6-covered triangulations. Received: July 17, 1998?Final version received: January 12, 2000     

Solvent effect of fluorescence on/off switching of diarylethene linked to excited-state intramolecular proton transfer fluorophore

Efficient fluorescence on/off switching of a dyad consisting of a photochromic diarylethene and a fluorescence dye based on excited state intramolecular proton transfer (ESIPT) was designed and demonstrated. Diarylethenes linked to (2-(2-methoxy-5-methylphenyl)benzothiazol-6-yl)- and (2-(2-hydroxy-5-methylphenyl)benzothiazol-6-yl)-9,9-dioctylfluorene moieties (1a and 2a, respectively) exhibited fluorescence on/off switching upon alternating irradiation with ultraviolet and visible light in various solvents. The fluorescence on/off contrast of 2a was found to be higher than that of 1a in n-hexane because the overlap integral between the absorption spectrum of the diarylethene closed-ring form and the fluorescence spectrum of 2a is larger than that of 1a. Diarylethene 2a exhibited green fluorescence with large Stokes shift in n-hexane, which is ascribed to the ESIPT process from the enol form to the keto form. In contrast, the fluorescence of 2a in N,N-dimethylsulfoxide (DMSO) was mainly observed as blue fluorescence from enol form, while diarylethene 1a exhibited blue fluorescence in n-hexane and DMSO. The fluorescence on/off contrast of 2a in n-hexane was higher than that in DMSO because of the difference in the spectral overlaps in n-hexane and DMSO.     

Influence of halogen substituents on the catalytic oxidation of 2,4,6-halogenated phenols by Fe(III)-tetrakis(p-hydroxyphenyl) porphyrins and potassium monopersulfate

The influence of halogen substituents on the catalytic oxidation of 2,4,6-trihalogenated phenols (TrXPs) by iron(III)-porphyrin/KHSO? catalytic systems was investigated. Iron(III)-5,10,15,20-tetrakis(p-hydroxyphenyl)porphyrin (FeTHP) and its supported variants were employed, where the supported catalysts were synthesized by introducing FeTHP into hydroquinone-derived humic acids via formaldehyde poly-condensation. F (TrFP), Cl (TrCP), Br (TrBP) and I (TrIP) were examined as halogen substituents for TrXPs. Although the supported catalysts significantly enhanced the degradation and dehalogenation of TrFP and TrCP, the oxidation of TrBP and TrIP was not enhanced, compared to the FeTHP catalytic system. These results indicate that the degree of oxidation of TrXPs is strongly dependent on the types of halogen substituent. The order of dehalogenation levels for halogen substituents in TrXPs was F > Cl > Br > I, consistent with their order of electronegativity. The electronegativity of a halogen substituent affects the nucleophilicity of the carbon to which it is attached. The levels of oxidation products in the reaction mixtures were analyzed by GC/MS after extraction with n-hexane. The most abundant dimer product from TrFP via 2,6-difluoroquinone is consistent with a scenario where TrXP, with a more electronegative halogen substituent, is readily oxidized, while less electronegative halogen substituents are oxidized less readily by iron(III)-porphyrin/KHSO? catalytic systems.