Roles of SiH4 and SiF4 in growth and structural changes of poly-Si films

The structural properties of polycrystalline silicon films, prepared by plasma enhanced chemical vapor deposition system, with different flow rates of SiH₄/SiF₄ mixtures at 300 °C were investigated. This study indicates that the low hydrogen coverage on the growing surface, under optimum fluorine radicals, will be leaded to an improvement of crystallized area as compared with case of high hydrogen coverage surface. Moreover, the studies of the role of SiH₄ and SiF₄ radicals show that the SiH₄ radicals are important in the nucleation and growth of grains. However, SiF₄ radicals are effective in the structural change of grain boundaries regions and by this way, in the present system, establish the growth of grains under the dominant 〈1 1 0〉 direction. The stress investigation indicates that addition of high flow rate of SiF₄ in amorphous film, results in the nearly stress free films. Finally, we found that the changes in g-value reflect the changes in the intrinsic compressive and tensile stress in the both polycrystalline and amorphous silicon films.     

Regioselective synthesis and properties of novel [60]fullerene bisadducts containing a dibenzocrown ether moiety

The reactions of [60]fullerene with bis-o-quinodimethane precursors 3, 4, and 5 containing a dibenzo-18-crown-6, 24-crown-8 and 30-crown-10 moiety, respectively, were investigated. Both 3 and 4 provided trans-4 bisadducts 6a and 7a, respectively, as major product, though the selectivity in the latter was lower than that in the former. As minor product, 6b (cis-2) was produced from 3, while 7c (e) as well as 7b (cis-2) were produced from 4. Precursor 5 exclusively afforded e bisadduct 8 without any other regioisomers. These bisadducts showed different ionophoric properties from one another; for instance, 6a and 7b exhibited a high complexing ability toward the K+ ion, while 6b hardly showed complexation with any alkali metal ions. The selectivity coefficients (K(Na,K)(pot)) of 6a and 7b toward K+ over Na+ ion, determined with an ion-selective electrode, were much higher than that of dibenzo-18-crown-6.     

Bromination by means of sodium monobromoisocyanurate (SMBI)

A variety of aromatic compounds with both activating and deactivating substituents were brominated with sodium monobromoisocyanurate (SMBI) 1, diethyl ether, diethyl ether-methanesulfonic acid, trifluoroacetic acid, or sulfuric acid were employed as solvents. Thus nitrobenzene was conveniently brominated in sulfuric acid, benzene was readily monobrominated in diethyl ether-methanesulfonic acid, and phenol was selectively brominated at the ortho position under mild conditions in refluxing diethyl ether. With substituents that are easily protonated, trifluoroacetic acid may be employed as solvent in the reaction with 1, in contrast NBS was ineffective in trifluoroacetic acid. This renders 1 a superior reagent relative to NBS. In addition to aromatics, alkenes, ketones and esters were also brominated with 1. Diethyl malonate was brominated with 1 and then subjected to a Bingel reaction with NaH to afford the desired methanofullerene in reasonable yield.     

Hybrid EuIII Coordination Luminophore Standing on Two Legs on Silica Nanoparticles for Enhanced Luminescence

In this study, we have demonstrated a two-legged, upright molecular design method for monochromatic and bright red luminescent Ln^III-silica nanomaterials. A novel Eu^III-silica hybrid nanoparticle was developed by using a doubly binding TPPO−Si(OEt)₃ (TPPO: triphenyl phosphine oxide) linker. The TPPO−Si(OEt)₃ was confirmed by ¹H, ³¹P, ²⁹Si NMR spectroscopy and single-crystal X-ray analysis. Luminescent Eu(hfa)₃ and Eu(tfc)₃ moieties (hfa: hexafluoroacetylacetonate, tfc: 3-(trifluoromethylhydroxymethylene)camphorate) were fixed onto TPPO−Si(OEt)₃-modified silica nanoparticles, producing Eu(hfa)₃(TPPO−Si)₂-SiO₂ and Eu(tfc)₃(TPPO−Si)₂-SiO₂, respectively. Eu(hfa)₃(TPPO−Si)₂−SiO₂ exhibited the higher intrinsic luminescence quantum yield (93 %) and longer emission lifetime (0.98 ms), which is much larger than those of previously reported Eu^III-based hybrid materials. Eu(tfc)₃(TPPO−Si)₂−SiO₂ showed an extra-large intrinsic emission quantum yield (54 %), although the emission quantum yield for the precursor Eu(tfc)₃(TPPO−Si(OEt)₃)₂ was found to be 39 %. These results confirmed that the TPPO−Si(OEt)₃ linker is a promising candidate for development of Eu^III-based luminescent materials.     

Where is the Oxygen? Structural Analysis of α‐Humulene Oxidation Products by the Crystalline Sponge Method

Crystal structures of α‐humulene, a cyclic sesquiterpene, and its oxidized subproducts, were analyzed by the crystalline sponge method. Regio‐ and stereochemistry, including absolute configuration when a chiral oxidant was applied, and the stable conformations of all the scaffold‐related compounds were successfully determined for samples on a 5–50 μg scale.     

Stable Encapsulation of Acrylate Esters in Networked Molecular Capsules

Reactive acrylate esters were encapsulated in the cavity of networked molecular capsules in a single‐crystal‐to‐single‐crystal fashion. Owing to the encapsulation effect, acrylates inside the capsules do not undergo polymerization upon irradiation with UV light or heating, while the guest molecules can be quantitatively extracted by treatment with toluene.     

Synthesis and properties of boron(III)-coordinated subbacteriochlorins

Subbacteriochlorins, which were prepared via hydrogenation of subporphyrins with Raney nickel, are modestly aromatic due to 14π-diazaannulenic circuit and exhibit characteristic blue-shifted Soret-like bands, intensified fluorescence spectra, and high oxidation potentials.