Selective crystallization of calcium salts by poly(acrylate)-grafted chitosan

The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.     

Charge transfer in FeO: a combined molecular-dynamics and ab initio study

Molecular-dynamics simulations and ab initio electronic structure calculations were carried out to determine the rate of charge transfer in stoichiometric wustite (FeO). The charge transfer of interest occurs by II/III valence interchange between nearest-neighbor Fe atoms, with the Fe(III) constituting a "hole" electronic defect. There are two possible nearest-neighbor charge transfers in the FeO lattice, which occur between edge-sharing or corner-sharing FeO(6) octahedra. Molecular-dynamics simulations predict charge-transfer rates of 3.7 x 10(11) and 1.9 x 10(9) s(-1) for the edge and corner transfers, respectively, in good agreement with those calculated using an ab initio cluster approach (1.6 x 10(11) and 8.0 x 10(8) s(-1), respectively). The calculated rates are also similar to those along the basal and c-axis directions in hematite (alpha-Fe(2)O(3)) determined previously. Therefore, as is the case for hematite, wustite is predicted to show anisotropic electrical conductivity. Our findings indicate that a rigid-ion model does not give acceptable results, thus showing the need to account for the change in polarizability of the system upon charge transfer. Our model achieves this by using a simple mechanical shell model. By calculating the electronic coupling matrix elements for many transition state configurations obtained from the molecular-dynamics simulations, we found evidence that the position of the bridging oxygen atoms can greatly affect the amount of electronic coupling between the donor and acceptor states. Finally, we address the effect of oxygen vacancies on the charge transfer. It was found that an oxygen vacancy not only creates a driving force for holes to transport away from the vacancy (or equivalently for electrons to diffuse toward the vacancy) but also lowers the free-energy barriers for charge transfer. In addition, the reorganization energy significantly differed from the nondefective case in a small radius around the defect.     

Dissociation and solubility variation versus pO2- of scheelite CaWO4 in molten NaCl−KCl (At 1000 K)

The conditional solubility of scheelite CaWO₄ in molten NaCl?KCl (1:1) has been studied either in oxobasic or oxoacidic media. In the former case it is increased by formation of sparingly soluble CaO according to:Ca²⁺ + O²CaO(s), pK_s^CaO = 10800/T ? 5.8 (molality scale) In the later case, WO₄^2- behaves as an oxobase according to the following equilibria:WO₄^2?WO₃ (s) + O^2? pK₀ = 10.0 at 1000 K3 WO₄^2?W3O₁₀^2? pK₃ = 12.7 at 1000KThe latter equilibrium favours an increase in the W^VI solubility when pO^2- is increased, for instance by injection of HCl. The whole set of results has been summarized by a conditional solubility diagram of scheelite versus pO^2-.     

Free energy of adsorption of water and calcium on the [10 1 4] calcite surface

Molecular dynamics simulations of the calcite-water interface have shown that the free energy of adsorption of water is relatively small compared to the previously calculated enthalpy of adsorption implying a large entropy change and that the free energy profile of a calcium adsorbing on the surface correlates with the solvent density; these calculations allow us to begin to address the rates of adsorption and desorption which are essential for studying growth and dissolution.     

Conditional solubility versus pO2− of cerium(III) oxide in molten equimolar NaCl+KCl at 727°C

Reactions between cerium trichloride and oxide ions were studied in NaCl+KCl (1/1) at 1000°K, by potentiometry with a calcia-stabilized zirconia membrane electrode. Titration curves clearly demonstrated the existence of soluble cerium oxychloride (CeO⁺) and precipitated cerium oxide (Ce₂O₃), with respective dissociation constants 10^?11 and 10^?30 (molality scale). The corresponding conditional solubility diagram {log S (Ce^III)=f(pO^2?)} is presented and discussed.     

Provably stable and time‐accurate extensions of Runge–Kutta schemes for CFD computations on moving grids

Extending fixed‐grid time integration schemes for unsteady CFD applications to moving grids, while formally preserving their numerical stability and time accuracy properties, is a nontrivial task. A general computational framework for constructing stability‐preserving ALE extensions of Eulerian multistep time integration schemes can be found in the literature. A complementary framework for designing accuracy‐preserving ALE extensions of such schemes is also available. However, the application of neither of these two computational frameworks to a multistage method such as a Runge–Kutta (RK) scheme is straightforward. Yet, the RK methods are an important family of explicit and implicit schemes for the approximation of solutions of ordinary differential equations in general and a popular one in CFD applications. This paper presents a methodology for filling this gap. It also applies it to the design of ALE extensions of fixed‐grid explicit and implicit second‐order time‐accurate RK (RK2) methods. To this end, it presents the discrete geometric conservation law associated with ALE RK2 schemes and a method for enforcing it. It also proves, in the context of the nonlinear scalar conservation law, that satisfying this discrete geometric conservation law is a necessary and sufficient condition for a proposed ALE extension of an RK2 scheme to preserve on moving grids the nonlinear stability properties of its fixed‐grid counterpart. All theoretical findings reported in this paper are illustrated with the ALE solution of inviscid and viscous unsteady, nonlinear flow problems associated with vibrations of the AGARD Wing 445.6. Copyright © 2011 John Wiley & Sons, Ltd.     

Novel water-soluble anticancer agents derived from 4-arylcoumarins

Novel 4-arylcoumarin derivatives were obtained. They are water-soluble analogs of the well-known anticancer drug combretastatin A-4. The key step of the synthesis involves the Suzuki-Miyaura cross-coupling. The water-soluble salts obtained exhibit considerable cytotoxic activity against the HBL-100 and HaCaT cell lines.     

New Cyclotriphosphazenes with P-CAr Bonds

Abstract

We describe some new cyclotriphosphazenes in which the phosphorus substituents are either free rotating aromatic or heteroaromatic groups, or rigid spirobiaryl units.