Microanalysis of nitro compounds. II

Summary A colorimetric method for the determination of phenolic compounds containing the nitro function is described. It is based on the production of a yellow color when nitrophenols are treated with iminobispropylamine in monochlorobenzene solution. There is no interference due to the presence of carbonyl and carboxyl groups in the molecule. Relationship between absorbance and concentration is linear in the range of 1 to 20g/ml for most nitrophenols. Isomeric compounds can be distinguished by the absorption spectra of their respective colored complexes.

---

Zusammenfassung Ein kolorimetrisches Verfahren zur Bestimmung phenolischer Nitroverbindungen wurde beschrieben. Es beruht auf der gelben Farbreaktion der Nitrophenole mit Imino-bis-propylamin in monochlorbenzolischer Lösung. Carbonyl-und Carboxylgruppen stören nicht. Absorption und Konzentration verhalten sieh bei den meisten Nitrophenolen zwischen 1 und 20g/ml linear. Isomere Verbindungen können an dem Absorptionsspektrum ihrer gefärbten Komplexverbindungen unterschieden werden.

---

Résumé On décrit une méthode colorimétrique pour le dosage des composés phénoliques contenant la fonction nitro. Elle est fondée sur la formation d'une coloration jaune quand les nitrophénols sont traités par l'imino-bispropylamine en solution dans le monochlorobenzene. Il n'y a pas d'interférence due à la présence de groupes carbonyles et carboxyles dans la molécule. La relation entre la densité optique et la concentration est linéaire dans le domaine de 1 à 20g/ml pour la plupart des nitrophénols. On peut distinguer les composés isomères par les spectres d'absorption de leurs complexes colorés respectifs.

---

---

For Part I of this series, see ref. 7.     

Overtone spectroscopy of some benzaldehyde derivatives

Overtone spectrum of o, m and p-nitrobenzaldehydes and p-chlorobenzaldehyde has been studied in 2000–12000 cm⁻¹ region. Vibrational frequencies and anharmonicity constants for aryl as well as alkyl CH stretch vibrations have been determined. We have also determined the internuclear distances for the aryl CH bond in the different molecules. The small variation observed in these distances is an indication of the substitution effect. It is observed that in the case of p-disubstituted benzens, the shift in aryl CH bond is proportional to sum of the Hammet σ of the substituents. However in the case of o-disubstituted benzenes it is only 80% of the para-substituted shift.     

Hyperfine coupling constants of the azafullerenes C19N, C59N, C69N, and C75N

The isomers of the nitrogen-substituted fullerenes (azafullerenes) C19N, C59N, C69N, and C75N are examined using all-electron Gaussian atomic orbital basis density functional theory, to determine the doublet radical geometries and hyperfine coupling constants. We find that the inaccuracy of previously calculated hyperfine coupling constants of C59N resulted from a poor treatment of the geometry optimization. We find that UB3LYP minimization of the radical geometry in the 6-31G basis, followed by single-point evaluation of the hyperfine constants in which an expanded basis is used on the atomic sites of interest, forms an efficient compromise between computational cost and accuracy with respect to experimental hyperfine constants. Using this approach, we assign the hyperfine signals observed in experiments on the C69N radical by calculating the hyperfine coupling constants for all five of the isomers and examine the electron spin density distribution. Finally, we present predicted hyperfine coupling constants for the isomers of C19N and C75N for use in the interpretation of future experiments.     

Extremes of nuclear structure

With the advent of medium and large gamma detector arrays, it is now possible to look at nuclear structure at high rotational forces. The role of pairing correlations and their eventual breakdown, along with the shell effects have showed us the interesting physics for nuclei at high spins — superdeformation, shape co-existence, yrast traps, alignments and their dramatic effects on nuclear structure and so on. Nuclear structure studies have recently become even more exciting, due to efforts and possibilities to reach nuclei far off from the stability valley. Coupling of gamma ray arrays with ‘filters’, like neutron wall, charged particle detector array, gamma ray total energy and multiplicity castles, conversion electron spectrometers etc gives a great handle to study nuclei produced online with ‘low’ cross-sections. Recently we studied, nuclei in mass region 80 using an array of 8 germanium detectors in conjunction with the recoil mass analyser, HIRA at the Nuclear Science Centre and, most unexpectedly came across the phenomenon of identical bands, with two quasi-particle difference. The discovery of magnetic rotation is another highlight. Our study of light In nucleus, 107In brought us face to face with the ‘dipole’ bands. I plan to discuss some of these aspects. There is also an immensely important development — that of the ‘radioactive ion beams’. The availability of RIB, will probably very dramatically influence our ‘conventional’ concept of nuclear structure. The exotic shapes of these exotic nuclei and some of their expected properties will also be touched upon.     

Preparation, structural analysis and dielectric properties of Bi x La1−x FeO3 perovskite

Rare earth element substituted bismuth ferrites (BiFeO₃) are of enormous importance as magnetoelectric materials. The polycrystalline samples of Bi _x La_1−x FeO₃ (x=0, 0.2, 0.4, 0.6, 0.8) were prepared by solid-state reaction using standard ceramic method. The single-phase formation of these compounds was confirmed by X-ray diffraction (XRD) studies. The samples with x=0, 0.2, 0.4, 0.6 are found to be orthorhombic while the sample with x=0.8 is triclinic. The dielectric constant (ε′) and dissipation factor (tan δ) were measured in the frequency range 100 Hz to 1 MHz at room temperature and as a function of temperature at certain fixed frequencies (1 kHz, 10 kHz, 100 kHz, 1 MHz). All the samples showed dielectric dispersion. The dielectric constant with temperature shows a broad peak; the peak temperature shifts with frequency which reflects the relaxor-type behavior. The peak above 600 K in the measured temperature range corresponds to antiferromagnetic ordering temperature (Néel temperature). The broadness of the peak changes with composition. The ac conductivity as well as ε′ are found to be maximum for the sample x=0.2 at room temperature.     

Analysis of human erythrocyte membrane vesicles produced by shearing

Shearing of ghosts in a French pressure cell produces three classes of microvesicles that differ from endocytic vacuoles, exocytic vacuoles, and inside-out vesicles. It was thought that an analysis of these vesicles might provide some clues about the assembly of proteins within the human erythrocyte membrane. The microvesicles were separated into three visible bands, labeled top, middle, and bottom, and assayed for activity of Mg++-ATPase, Na+,K+-ATPase, acetylcholinesterase, glyceraldehyde-phosphate dehydrogenase, and NADH oxidoreductase. Their proteins were also characterized by polyacrylamide gel electrophoresis with both Coomassie blue staining, to assess total protein content and distribution, and PAS-staining, to characterize sialoglycopeptides. In order to minimize problems inherent in ghost preparation, Dodge or hypotonic ghosts and glycol or isotonic ghosts were used in all studies. Middle membrane vesicles most resembled intact ghosts. Top vesicles had reduced levels of NADH oxidoreductase and more PAS-2 at the expense of PAS-1. The bottom vesicle class was very much enriched with PAS-1 at the expense of PAS-2, and PAS-3 was completely absent. In addition bottom vesicles had highest NADH oxidoreductase activity but lowest activity of all the other enzymes measured. These vesicle classes could not have been produced by tangential shearing through the membrane, nor could radial shearing through a membrane in which all proteins were free to move laterally have accounted for the three discrete vesicle classes or for their different patterns of enzymes and proteins. The analysis of the microvesicles produced by shearing is most consistent with radial shearing through membranes where there may be fixed domains superimposed on the basic fluid-mosaic structure.     

On the size-dependent behavior of nanocrystal-ligand bonds

Recent experiments have indicated that 3-mercapto-1-propanol ligands display a size-dependent binding energy of attachment to the surface of II-VI semiconductor nanocrystals. Using semiempirical calculations, we exhaustively calculate the energy of this bond at each surface site, for CdSe and CdSe/CdS core/shell nanocrystals ranging from 1.8 to 4.1 nm in diameter. Our results suggest that the experimentally observed changes in binding energy are due to the distribution of surface facets on the nanocrystals, and not related to the band gap, as proposed in the experimental paper.     

Prediction of calcite morphology from computational and experimental studies of mutations of a de novo-designed peptide

Many organisms use macromolecules, often proteins or peptides, to control the growth of inorganic crystals into complex materials. The ability to model peptide-mineral interactions accurately could allow for the design of novel peptides to produce materials with desired properties. Here, we tested a computational algorithm developed to predict the structure of peptides on mineral surfaces. Using this algorithm, we analyzed energetic and structural differences between a 16-residue peptide (bap4) designed to interact with a calcite growth plane and single- and double-point mutations of the charged residues. Currently, no experimental method is available to resolve the structures of proteins on solid surfaces, which precludes benchmarking for computational models. Therefore, to test the models, we chemically synthesized each peptide and analyzed its effects on calcite crystal growth. Whereas bap4 affected the crystal growth by producing heavily stepped corners and edges, point mutants had variable influences on morphology. Calculated residue-specific binding energies correlated with experimental observations; point mutations of residues predicted to be crucial to surface interactions produced morphologies most similar to unmodified calcite. These results suggest that peptide conformation plays a role in mineral interactions and that the computational model supplies valid energetic and structural data that can provide information about expected crystal morphology.