Dielectronic recombination of lithium-like Ar15+

Dielectronic recombination (DR) of Ar¹⁵⁺(1s ²2s) ions was studied in a single-pass merged-beams experiment at the UNILAC (universal linear accelerator) of GSI. Absolute recombination rates and cross sections were measured for electron-ion center-of-mass energies from 0 to 580 eV. A number of Rydberg states formed by DR with 2s → 2p (Δn=0) and 2s → 3? (Δn=1) core excitations and even individual terms in the 1s ²3?3?′ configuration could be resolved. Theoretical calculations of DR cross sections are in good overall agreement with the data. In the calculations for Δn=0 transitions, effects of electric fields have to be included to reproduce the magnitude of the measured DR rates at the limit of the 2 _{p 1/2}? and 2 _{p 3/2}? Rydberg series. Discrepancies between theory and experiment are observed at the series limits of the (1s ²3?n?′) Rydberg series.     

The surface charge of regenerated cellulose fibres

In this paper the influence of charged species on the sheet strength of viscose fibres was investigated. Four samples of chemical modified viscose fibres, as well as a reference fibre were studied. The swelling of these viscose fibres and the breaking length of hand sheets have been determined. Comparing the results, the influence of both, swelling and surface charge on the bonding force, is evident. The allocation of the charges, induced by cationic starch and Carboxmethylcellulose, has been analyzed by Titration, attenuated total reflection spectroscopy (ATR) and X-ray photoelectron spectroscopy (XPS). Titration was used to make a first estimation of the charge distribution within the fibre. Using ATR and XPS, more detailed information about the surface charge has been achieved. All measurement methods showed a significant amount of charge on the fibre surface.     

Water intake of cellulose materials monitored by positron annihilation lifetime spectroscopy

Cellulose - In this study, for the first time, the experimental technique of positron annihilation lifetime spectroscopy (PALS) has been applied to monitor in situ the microstructural changes of...     

A theoretical study of Zn adsorption and desorption on a Pd(111) substrate

The adsorption and structure of Zn on a Pd(111) surface has been investigated using density functional theory (DFT). It could be shown that Zn prefers adsorption sites with a maximum amount of Pd neighbours on the Pd(111) surface. Zn does form a stable PdZn surface alloy on Pd(111) which shows a (2 × 1) structure. The surface energy of this surface alloy decreases with increasing numbers of PdZn layers. Furthermore the adsorption of Zn on the PdZn surface alloy was investigated. The electronic structure of the Zn layers approaches the bulk Zn state only after a thickness of 4 additional Zn layers. A clear charge transfer between Pd and Zn has been found and the electronic structure of the Zn suggests an anisotropic binding of the Zn, with higher binding energy within a Zn layer and lower binding energy between two Zn layers. This is also reflected in the different desorption energies of different Zn layers found in experiments.     

Imaging of the formerly bonded area of individual fibre to fibre joints with SEM and AFM

Besides the determination of the force and the energy needed to break individual fibre to fibre joints, the investigation of the formerly bonded area (FBA) is of essential importance to learn more about the failure mechanisms of fibre–fibre bonds in general. In this study the surfaces of paper fibres and the FBA of fibre–fibre joints after the determination of the breaking force as well as the bonding energy were analysed by means of low voltage scanning electron microscopy and atomic force microscopy. A comparison between the contact zone of fibres broken at different loading rates as well as under cyclic loading showed that there seems to be no significant difference in the appearance of the FBA in these cases. Only minor delamination of the cell wall could be found in the bonding zone, which indicates no mechanical interlocking of fibrils in the bonding zone. Furthermore, it is shown that some glues used for specimen preparation of fibre–fibre bond strength measurement are forming a glue film on the fiber surface and migrate into the bonding region.     

Analysis of precipitated lignin on kraft pulp fibers using atomic force microscopy

A method is presented which enables analysis of lignin precipitated on the surface of kraft pulp fibers. As experimental input, high-resolution atomic force microscopy phase images of the fiber surfaces have been recorded in tapping mode. A digital image analysis procedure—based on the watershed algorithm—is applied to distinguish between cellulose fibrils and the precipitated lignin. In this way, size distributions for the diameter of lignin precipitates on pulp fiber surfaces can be obtained. In an initial application of the method, three softwood kraft pulps were analyzed: a black liquor cook with a very high content of precipitated lignin, a bleached pulp where nearly no precipitated lignin is visible and an unbleached industrial pulp. The proposed method is suggested as an appropriate tool to investigate the kinetics of lignin precipitation and the structure of lignin precipitates in pulping and bleaching.     

Recombination of Au25+ with free electrons at low energies

The origin of the widely observed enhancement of rates for electron-ion recombination at very low energies is still unknown. We investigated the recombination of Au²⁵⁺ with free electrons in a merged-beams experiment at the UNILAC accelerator of the GSI in Darmstadt. At E _rel= 0 eV we found an enormous enhancement factor of 365 compared to the theory of radiative recombination. An increase of the electron density by a factor of 10 had not much influence on the measured rate coefficient. This revised version was published online in July 2006 with corrections to the Cover Date.     

The surface properties of tetradecyltrimethylammonium bromide observed by capillary electrophoresis

The electroosmotic flow (EOF) is measured as a function of tetradecyltrimethylammonium bromide (TTAB) concentration and is shown to have distinct zones that are pH dependent. The data is correlated with previously proposed surface structures ranging from unimolecular adsorption to hemimicelles and micelles of TTAB adsorbed on the hydrated fused silica. A plot of the TTAB concentration at zero EOF versus pH shows that the zero point of charge (zpc) is pH dependent and that a linear extrapolation of the data intercepts close to the pH value for the zpc of a fused-silica surface. This shows that different surface properties at different pH values at any given TTAB concentration are generally dealt with. Therefore, these pH-dependent structures of the fused-silica surface have to be taken into account while studying these phenomena.