Synthesis and characterization of high Tg carbazole-based amorphous hole-transporting materials for organic light-emitting devices

Novel hole-transporting materials based on carbazole dendrimers, namely G1CBC and G2CBC were synthesized and characterized. They are thermally stable with high glass transition temperatures (T_g) up to 245 °C and exhibit chemically-stable redox processes. Double-layer green OLEDs using these materials as the hole-transporting layer (HTL) with the device configuration of ITO/HTL/Alq3/LiF:Al emit brightly (λ_em 522-534 nm) from the Alq3 layer with a maximum luminance and low turn-on voltage of 15,890 cd/m² and 3.0 V, respectively. Their ability as HTLs in terms of device performance is comparable to the common hole-transporter N,N′-diphenyl-N,N′-bis(1-naphthyl)-(1,1′-biphenyl)-4,4′-diamine (NPB), however their thermal properties were far greater than both NPB and N,N′-bis(3-methylphenyl)-N,N′-bis(phenyl)benzidine (TPD).     

Rheology,morphology and tensile properties of thermotropic liquid crystalline polymer/polypropylene in‐situ composites

Blends of various grades of polypropylene (PP) with a thermotropic liquid crystalline polymer (TLCP), namely a copolymer of p‐benzoic acid and ethylene terephthalate (60/40 mole ratio) were prepared as extruded films. A thermoplastic elastomer styrene (ethylene‐butylene) styrene (SEBS) was used as a compatibilizer. Melt viscosities of all specimens were measured using a plate‐and‐plate rheometer with oscillating mode in the shear rate region of 1 ‐ 200 rad/s. Addition of SEBS compatibilizer resulted in an increase of the blend viscosity. Observation of the blend morphology revealed an improvement of TLCP dispersion. The TLCP fiber aspect ratio (length to diameter) in the extruded film also increased after addition of SEBS. As a result, the film modulus in extrusion direction was enhanced. The tensile strength of the film specimen was also increased due to an improvement of interfacial adhesion.     

Thermal stability of styrene–(ethylene butylene)–styrene-based elastomer composites modified by liquid crystalline polymer, clay, and carbon nanotube

The thermal decomposition behaviors of styrene?C(ethylene butylene)?Cstyrene (SEBS) thermoplastic elastomer filled with liquid crystalline polymer (LCP), organomontmorillonite (OMMT), and carbon nanotube (CNT) as a heat stabilizing filler, were comparatively investigated using nonisothermal- and isothermal-thermogravimetric analyses in air. The isoconversional method was employed to evaluate the kinetic parameters (E _a, lnA, and n) under dynamic heating. For neat samples, OMMT and CNT exhibited their respective lowest and highest thermal stabilities as revealed from the lowest and the highest T _onset values, respectively. The decomposition rates of the composites containing OMMT at the temperature >250?°C were higher than those containing CNT and LCP, respectively, whereas the elastomer matrix degraded with the highest rate. The obtained TG profiles and calculated kinetic parameters indicated that the incorporation of LCP, OMMT, and CNT into elastomer matrix improved the thermal stability. Especially, the CNT- and OMMT-containing composites significantly improved the thermal stability compared with the neat matrix polymer. Simultaneously recorded DSC thermograms revealed that the degradation processes for the neat polymers and their composites were exothermic in air. From the simultaneously recorded DSC data, the enthalpy of thermal decomposition for each composite system was found to be lower than that of the neat matrix and mostly decreasing with increasing filler loading. The isothermal decomposition stabilities of the neat SEBS and its composites containing the different fillers were in agreement with those of the nonisothermal investigation.     

Synthesis, optical, electrochemical, and thermal properties of conjugated α-fluorenyl oligothiophenes

A series of new α-fluorenyl oligothiophenes up to the pentamer have been synthesized using Suzuki cross-coupling and bromination reactions. The optical, electrochemical, and thermal properties of these materials can be tuned by varying the number of thiophene rings. The longer oligomers (n ? 4) were stable, crystalline, and unreactive to electrochemical oxidative dimerization.     

Synthesis and characterization of N-carbazole end-capped oligofluorene-thiophenes

A series of novel N-carbazole end-capped oligofluorene-thiophenes with one, two, three, and four thiophene rings were synthesized using either palladium catalyzed cross-coupling reaction or nickel-catalyzed reductive dimerization. All the oligomers have been characterized by ¹H, ¹³C NMR, FTIR, UV-vis, PL spectroscopy and mass spectrometry. It has been demonstrated that the optical, thermal, and electrochemical properties of these materials can be tuned by varying the conjugation length of the oligothiophene segment. The terminal carbazole and fluorene moieties of the resulting materials are beneficial for their morphology, conjugation length, and solubility. These bright fluorescent, thermally and electrochemically stable compounds have potential applications as light-emitting and hole-transporting layers in organic light-emitting devices.     

Synthesis, optical, electrochemical, and thermal properties of α,α′-bis(9,9-bis-n-hexylfluorenyl)-substituted oligothiophenes

A series of new α,α′-bis(9,9-bis-n-hexylfluorenyl)-substituted oligothiophenes with 2-, 4-, and 6-thiophene rings have been synthesized via a nickel-catalyzed reductive dimerization and their optical, electrochemical, and thermal properties investigated. The fluorene substituents have shown electronic interactions with the oligothiophene chains, enhanced the solubility of these materials and stabilized the radical cation and dication by blocking the reactive α-positions of the thiophene moieties. The absorption, fluorescence, electrochemical, and thermal properties of these materials can be tuned by varying the conjugation length of the oligothiophene segment.     

Synthesis and characterization of N-carbazole end-capped oligofluorenes

A series of N-carbazole end-capped oligofluorenes (CF_n, n = 1-3) were synthesized. The 9-position of the carbazole moiety was attached to the terminal ends of the oligofluorene cores using an Ullmann coupling reaction. These molecules exhibit red shifts in absorption and photoluminescence spectra with respect to the number of fluorene units and excellent electrochemical reversibility. They were found to be potential blue light-emitting or hole-transporting materials for organic light-emitting diodes (OLEDs).