Electrical conducting and magnetic properties of (ethylenedithiotetrathiafulvalenothioquinone-1,3-diselenolemethide)2.FeBr4 (GaBr4) crystals with two different interlayer arrangements of donor molecules

Two donor molecules newly synthesized, dimethylthio- and ethylenedithio-tetrathiafulvalenothioquinone-1,3-diselenolemethides (1 and 2), were used to prepare their charge-transfer (CT) salts with a magnetic FeBr(4)(-) counteranion. For 1, a low electrical conducting 1:1 salt (1.FeBr(4)) was obtained, in which molecules of 1 are tightly dimerized in a one-dimensional (1D) stacking column. On the other hand, 2 gave a 2:1 salt (2(2).FeBr(4)) as two different kinds of plate crystals (I and II). Both I and II possess similar stacking structures of molecules of 2 in each 1D column with a half-cut pipelike structure along the c axis. However, for I, the stacking columns are aligned in the same direction along the a and b axes, while for II they are in the same direction along the a axis, but in the reverse direction along the b axis, resulting in the difference in the relative arrangement of molecules of 2 and FeBr(4)(-) ions between the two crystals. The room-temperature electrical conductivities of the single crystals of I and II were 13.6 and 12.7 S cm(-)(1), respectively. The electrical conducting behavior in I was metallic above 170 K but changed to be semiconducting with a very small activation energy of 7.0 meV in the temperature range 4-170 K. In contrast, II showed the semiconducting behavior in the whole temperature range 77-285 K. The corresponding nonmagnetic GaBr(4)(-) salts with almost the same crystal structure as I and II showed definitively different electrical conducting properties in the metal to semiconductor transition temperature in I as well as in the magnitude of activation energy in the semiconducting region of I and II. The interaction between the d spins of FeBr(4)(-) ions was weak and antiferromagnetic in both I and II, but the magnitude of the spin interaction was unexpectedly larger compared with that in the FeBr(4)(-) salt of the corresponding sulfur derivative of 2 with closer contact between the neighboring FeBr(4)(-) ions. These electrical conducting and magnetic results suggest a significant interaction between the conducting pi electrons and the d spins of FeBr(4)(-) ions located near the columns or layers.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Polymer-supported bases. IX. Synthesis and catalytic activity of polymer-bound 4-(1-pyrrolidino)pyridine moieties

Polystyrene-bound 4-(1-pyrrolidino)pyridine moieties were prepared by the reaction of chloromethylated polystyrene resins with pyrrolidinopyridine derivatives containing hydroxyl groups. The supported amines were effective catalysts for acylations of tert-alcohols or enols, acylrearrangements, and diester synthesis from epoxides and anhydrides. Some of the low ring-substituted (8–15%) catalysts exhibited high activity comparable to that of 4-(N,N-dimethylamino)pyridine, though the activity was a little lower than that of 4-(1-pyrrolidino)pyridine. The recovered catalysts can be re-used, except for acyl rearrangements, without significant decrease in activity.     

Hydrogen-bonded networks in organic conductors: crystal structures and electronic properties of charge-transfer salts of tetracyanoquinodimethane with 4,4'-biimidazolium having multiprotonated States

[structure: see text] Novel hydrogen-bonded charge-transfer salts of TCNQ with mono- and diprotonated 4,4'-biimidazolium were synthesized in order to demonstrate the high potential of the 4,4'-biimidazole system in a molecular conductor from the viewpoint of crystal engineering and electronic modulation. Crystal structure analyses of neutral 4,4'-biimidazole and TCNQ salts revealed the formation of two types of hydrogen-bonding modes of the 4,4'-biimidazole moiety depending on the protonated states. Neutral 4,4'-biimidazole possessed a linear chain mode of hydrogen-bonding to construct two-dimensional network. In the TCNQ salt of monoprotonated 4,4'-biimidazolium, the 4,4'-biimidazole moiety formed a dimer by a complementary mode of hydrogen-bonding. In contrast, the salt of diprotonated 4,4'-biimidazolium showed a double linear chain mode of hydrogen-bonding to construct a three-dimensional network. The formation of two types of hydrogen-bonding modes made the difference in the stacking patterns of TCNQ columns and in their transport properties. The TCNQ salt of diprotonated 4,4'-biimidazolium exhibited high electrical conductivity (sigma(rt) = 1.1 x 10(-1) S cm(-1)).     

Determination of optimal formulation for extrusion granulation by compression test of wet kneaded mass

The purpose of this study is to propose the application of a compression test to the determination of an optimal formulation for extrusion granulation. The electric current during extrusion was measured and the characteristics of the wet kneaded mass in the compression test were analyzed under various operating conditions, with different types of extruders and several formulations of kneaded mass. It was found that addition of a binder (HPC-L) to pharmaceutical powders lowered the load of a high-compressing type extruder, since the binder reduced the friction among the wet mass during extrusion. Also, the support stress was found to be proportional to the compression pressure without a binder, although an inflection point appeared on the support stress curve when a binder was present. This inflection point suggested large water retention of the wet kneaded mass, at which the medium of pressure was changed from a discontinuous solid powder to a continuous liquid, and large water retention contributed to the low friction of the wet mass. The friction of the wet kneaded mass and the aptitude of the formulation for extrusion were understood by using the compression test. The compression test is a very useful procedure at the first stage of a formulation study.     

A New Approach to the Construction of BEDT-TTF Derivatives Condensed with Heterocycles via BF3-promoted Reactions of Organotin Thiolates

The synthesis of BEDT-TTF derivatives fused with heterocycles (3–7) has been accomplished via the BF₃-promoted reaction of organotin thiolates (8 and 9) with electrophiles (10 and 11). Electrical conductivities of radical cation salts derived from some of them were also investigated.     

Site-directed 13C solid-state NMR studies on membrane proteins: strategy and goals toward revealing conformation and dynamics as illustrated for bacteriorhodopsin labeled with [1-13C]amino acid residues

We have so far demonstrated that well-resolved and site-specifically assigned (13)C peaks as recorded by site-directed NMR study on (13)C-labeled membrane proteins can serve as a convenient probe to reveal their local conformation and dynamics. We attempted here to clarify the extent to which (13)C NMR spectra of (13)C-labeled fully hydrated bacteriorhodopsin (bR) as a typical membrane protein are visible or well resolved in the presence of inherent fluctuation motions with frequency of 10(2)-10(8) Hz, especially at the membrane surfaces. Accordingly, we estimated the relative proportion of (13)C NMR signals from the surface areas with and without peak suppression by the accelerated transverse relaxation effect by surface-bound Mn(2+) ions, which could be effective for residues within 8.7 angstroms of the membrane surface. It turned out that the experimental findings are consistent with the predicted amount of amino acid residues under consideration located within 8.7 angstroms of the surface for [1-(13)C]Val- and Ile-labeled bR and also [3-(13)C]Ala-bR. In contrast, (13)C NMR peaks from such surfaces area are almost completely or partially suppressed for [1-(13)C]Gly-, Ala-, Leu-, Phe- and Trp-labeled bR, as a result of plausible interference of the fluctuation frequency with frequency of magic angle spinning (10(4) Hz). We further assigned several (13)C NMR signals of [1-(13)C] Val-, Trp- and Ile-labeled bR on the basis of a variety of site-directed mutants with reference to those of the wild type. Further, we recorded the (13)C NMR of bR in lipid bilayers to search for the optimal conditions to be able to obtain signals with the highest peak intensities and spectral resolution. Backbone dynamics turn out to be essential for recording (13)C NMR spectra so as to escape from motional frequencies of the order of 10(4)-10(5) Hz, either in the direction of accelerated fluctuation or slowed motions in the direction of forming the 2D array.     

meso-Alkyl-substituted meso-meso linked diporphyrins and meso-alkyl-substituted meso-meso, beta-beta, beta-beta triply linked diporphyrins

[reaction: see text] AgPF6-promoted oxidation of 5,10,15-trialkyl zinc(II) porphyrins led to formation of meso-meso linked diporphyrins, which were further oxidized with Sc(OTf)3 and DDQ to give meso-meso, beta-beta, beta-beta triply linked diporphyrins that exhibited a stronger aggregation propensity than corresponding meso-aryl diporphyrins.     

Free boson realization of

We construct a realization of the quantum affine algebra of an arbitrary level k in terms of free boson fields. In the q1 limit this realization becomes the Wakimoto realization of. The screening currents and the vertex operators (primary fields) are also constructed; the former commutes with modulo total difference, and the latter creates the highest weight state from the vacuum state of the boson Fock space.fellow of Soryushi ShogakukaiAddress after June 1: Department of Physics, Faculty of Liberal Arts, Shinshu University, Matsumoto 390, Japan