Graphisches Verfahren zur Bestimmung der Eigenfrequenzen bei mehrgliedrigen Schwingungsanordnungen

Ohne Zusammenfassung     

Olefin terpolymerizations. II. 4-vinylcyclohexene and cyclooctadiene

4-Vinylcyclohexene (VCH) and cyclooctadiene (COD) were investigated as termonomers in EPDM (ethylene/propylene/diene) synthesis by using rac-ethylenebis (1-η⁵-indenyl) zir-conium dichloride ( 1 ) as a catalyst precursor. Homopolymerizations of VCH, vinylcycloh-exane and cyclohexene were compared. The parameter K_πκ_p, which is the apparent rate constant for Ziegler-Natta polymerization, is about the same for VCH and vinylcyclohexanebut is 10 times smaller for cyclohexene. Therefore, the linear olefinic double bond is more active than the cyclic internal double bond. VCH reduces ethylene polymerization rate but not propylene polymerization rate in copolymerizations. In terpolymerizations, VCH tends to suppress ethylene incorporation especially at elevated polymerization temperature and Lowers the polymer MW by about two-fold. COD has very low activity as a termonomer. © 1995 John Wiley & Sons, Inc.     

Asymmetric zirconocene precursors for catalysis of propylene polymerization

Racemic isopropylidene (1-η⁵-cyclopentadienyl)(1-η⁵-indenyl) dichlorozirconium and the 3-methylindenyl derivative have been synthesized and characterized. These precursors activated with methylaluminoxane produce poly(propylene) with hemiisotactic microstructures. © 1994 John Wiley & Sons, Inc.     

Characterization of CNS disorders and evaluation of therapy using structural and functional MRI

Modern drug development requires technologies that allow rapid translation from the preclinical to the clinical stage. It is obvious that non-invasive imaging modalities such as magnetic resonance imaging (MRI) will play a central role in this regard. This article reviews the use of structural and functional MRI readouts for characterization of central nervous system (CNS) disorders and evaluation of the efficacy of potential CNS drugs. Examples comprise dementia of Alzheimer's type, cerebral ischemia, and neuroinflammation covering both clinical and preclinical aspects. In these examples MRI has been used to obtain relevant structural information on brain atrophy, on the location and extent of ischemic brain areas, and on the number and distribution of demyelinated plaques. These structural data are complemented by readouts assessing the functional consequences associated with the pathomorphological changes. In the last decade, MRI has evolved into a standard tool for the development of CNS drugs. With regard to target-specific/molecular imaging applications MRI is limited by its inherently low sensitivity; complementary imaging modalities utilizing optical and radionuclear reporter systems will thus be required.     

Heptane-soluble homogeneous zirconocene catalyst: Synthesis of a single diastereomer,polymerization catalysis,and effect of silica supports

Bis(1-indenyl)-di[1′S, 2′R, 5′S)-methoxy]silane ( 1 ) was converted into a mixture of corresponding ansa-diastereomeric zirconocenes. Further purification afforded a single dia-stereomer, di[(1′S, 2′R, 5′S)-methoxy] silylene-bis[η⁵-1(R, R)-(+)-indenyl] dichlorozirconium ( 2 ), which is optically active and hydrocarbon soluble. Extremely rapid ethylene, propylene, and ethylene-hexene polymerizations were observed both in toluene and n-heptane solutions; for instance, at 50°C, activity for ethylene polymerization reaches ～ 1.5×10¹⁰ (g of PE/((mol of Zr) · [C₂H₄] · h). The “bare” zirconocenium ion generated from 2/TIBA/Ph₃CB(C₆F₅)₄ exhibits unusual polymerization behaviors; the polymerization activity increases monotonically with temperature of polymerization (T_p) up to a conventional polymerization condition (50–70°C), and the ¹³C NMR study shows that the isotactic poly-propylene obtained has fairly high [mmmm] methyl pentad distributions at high T_p (?25°C with [mmmm] ～ 0.93–0.75) and a perfect stereoregularity at low T_p (?0°C with [mmmm] > 0.99). The catalyst precursors 2 and Et(Ind)₂ZrCl₂ ( 3 ) supported on silica by different approaches produced poly(olefins) of different molecular weights and stereoregularities, and a methylaluminokane and Ph₃CB(C₆F₅)₄ free silica-supported zirconocene system was found to be activated by triisobutylaluminum. © 1995 John Wiley & Sons, Inc.     

Austauscher mit cyclischen Polyethern als Ankergruppen—II: Anwendungen

Exchangers with cyclic polyethers as anchor groups have a large range of applications such as separations of cations with a common anion, of anions with a common cation, and of neutral organic compounds, and the determination of water by elution chromatography. Some crown ether monomers, especially 4- and 4,4′-alkyl-substituted benzo-derivatives are suitable for extractions and their adducts with heteropoly acids are used as liquid ion-exchangers. The exchangers are also applied in thin-layer chromatography and thin-layer electrophoresis. Furthermore the exchangers are successfully used in preparative chemistry, e.g., in salt conversions in order to isolate salts which are difficult to prepare by other means, in isolation and purification of organic compounds, and for anion activation in organic reactions.     

Photolysis of (η5-C5H5)2V(CH3)2: II . Photo-induced formation of ethane

Photolysis of (η⁵-C₅H₅)₂V(CH₃)₂ results in the formation of methane and ethane. The percentage of ethane detected in the evolved gas can vary from a trace to 70%. The percentage of ethane formed is dependent on the solvent, the concentration of (η⁵-C₅H₅)₂V(CH₃)₂, time and temperature. The results of oxidation and reduction reactions involving (η⁵-C₅H₅)₂V(CH₃)₂ are also presented.     

Time-resolved fluorescence of the bacteriophage T4 capsid protein gp23

The time-resolved fluorescence properties of the bacteriophage T4 capsid protein gp23 are investigated. The structural characteristics of this protein are largely unknown and can be probed by recording time-resolved and decay-associated fluorescence spectra and intensity decay curves using a 200 ps-gated intensified CCD-camera. Spectral and decay data are recorded simultaneously, which makes data acquisition fast compared to time-correlated single-photon counting. A red-shift of the emission maximum within the first nanosecond of decay is observed, which can be explained by the different decay-associated spectra of fluorescence lifetimes of the protein in combination with dipolar relaxation. In addition, iodide quenching experiments are performed, to study the degree of exposure of the various tryptophan residues. A model for the origin of the observed lifetimes of 0.032 +/- 0.003, 0.39 +/- 0.06, 2.1 +/- 0.1 and 6.8 +/- 0.8 ns is presented: the 32 ps lifetime can be assigned to the emission of a buried tryptophan residue, the 0.4 and 2.1 ns lifetimes to two partly buried residues, and the 6.8 ns lifetime to a single tryptophan outside the bulk of the folded gp23.     

The cationic polymerization and copolymerization of isopropenylmetallocene monomers

Three types of isopropenylmetallocene monomers were synthesized and subjected to polymerization and copolymerization by cationic initiators; (1) isopropenylferrocene (IF); (2) (η⁵-isopropenylcyclopentadienyl)dicarbonylnitrosylmolybdenum (IDM); and (3) 1,1′-diisopropenylcyclopentadienylstannocene (DIS), and related derivatives of each. IF was synthesized by a three-step procedure involving the acetylation of ferrocene, conversion of the latter to 2-ferrocenyl-2-propanol, and dehydration of the carbinol. IF was homopolymerized under various cationic initiation conditions, but only low molecular weight homopolymers were obtained. Copolymerization of IF with styrene and with p-methoxy-α-methylstyrene also gave only low molecular weight products. The formation of only low molecular weight polymers in all polymerization reactions is believed to result from the effect of the unusually high stability of ferrocenyl carbenium ions on its propagation reaction. The observed polymerization behavior of α-trifluoromethylvinylferrocene is in accord with this conclusion. IDM and DIS did not form polymeric products under cationic conditions, although copolymers could be obtained for each of these monomers and styrene with a free radical polymerization initiator (AIBN).