α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> thin films by liquid phase deposition: low-cost option for supercapacitor

In the present study, iron oxide (α-Fe₂O₃) thin films with good adhesion on stainless steel substrates are deposited by liquid phase deposition (LPD) technique, which is additive and binder-free. Iron oxyhydroxide (FeOOH) thin films are formed by means of a ligand-exchange equilibrium reaction of metal-fluoro complex ions and an F^?ions consuming reaction by using boric acid (H₃BO₃) as a scavenging agent. These films are annealed at 500 °C to get α-Fe₂O₃ thin films. The transformation from hydrophobic to hydrophilic nature of the films is observed due to annealing. The films are characterized by different techniques. The α-Fe₂O₃ film is checked for electrochemical supercapacitive performance in Na₂SO₃ solutions of various concentrations. Specific capacitance is calculated from cyclic voltammetry at numerous scan rates (5–200) mV s^?1. The highest obtained value of specific capacitance is 582 F g^?1 at 5 mV s^?1 for 0.5 M Na₂SO₃ electrolyte. The maximum values of specific power and specific energy are 6.9 and 53.4 Wh kg^?1 from the charge-discharge curve at the current density 2 mA cm^?2 in 0.5 M Na₂SO₃ electrolyte.     

A weight-function approach for determining watershed initial conditions for combustion waves

In many generic combustion models, one finds that a combustionwave will develop with a specific wave speed. However, thereare possible initial temperature profiles which do not evolveinto such waves, but rather die out to the ambient temperature.There can exist, in some models, a clear distinction betweenthose initial conditions that do evolve into combustion wavesand those that do not; this is sometimes referred to as thewatershed initial condition. When fuel consumption is consideredto be negligible, analytical methods can be used to obtain theexact watershed. In this paper, we consider the problem of determiningpseudo-watersheds and ascertaining the relationship betweenthese pseudo-watersheds and the exact watersheds. In the processa novel weight-function approach for infinite spatial domainsis developed.     

Substrate assisted electrochemical deposition of patterned cobalt thin films

The patterned Co layers deposited on the scratched Cu surfaces were investigated with the use of the scanning electron microscopy. Patterned cobalt thin films were electrochemically deposited from the cobalt sulfate bath at room temperature. Pattering of cobalt was carried out by simple means of substrate scratching. Gentle scratching induces a direct pattering of cobalt from vertical to horizontal. The prepared pattered films were characterized for their structural, surface morphological and compositional properties by means of X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. X-ray diffraction studies reveal that the films are of cobalt. From the SEM images fabrication of patterns of cobalt is apparent. This work demonstrates a novel approach for obtaining patterned cobalt for many technological applications.     

Growth of Co clusters on thin films Al2O3NiAl(100)

We present a scanning tunnel microscopy study of Co clusters grown through vapor deposition on Al(2)O(3) thin films over NiAl(100) at different coverages and temperatures. Formation of Co clusters was observed at 90, 300, 450, and 570 K. At the three lower temperatures, we find narrow cluster size distributions and the mean sizes (with a diameter of 2.6 nm and a height of 0.7 nm) do not change significantly with the coverage and temperature, until the clusters start to coalesce. Even on 3-4-nm-wide crystalline Al(2)O(3) strips where the deposited Co atoms are confined, the same features sustain. Only at 570 K the normal growth mode where the cluster size increases with the deposition coverage is observed, although the data are less conclusive. A simple modeling of kinetic surface processes on a strip confirms the normal growth mode, but fails to show a favored size unless additional energetic constraints are applied on the cluster sizes. Increasing Co coverages to cluster coalescence, a larger preferable size (mean diameter of 3.5 nm and height of 1.4 nm) appears for growth at 450 K. These two sizes are corroborated by morphology evolution of high Co coverages deposited at 300 K and annealed to 750 K, in which the coalescence is eliminated and the two preferable geometries appear and coexist.     

Synthesis of cytotoxic cyanobactin,Wewakazole B

We report herein the synthesis of cytotoxic cyanobactin, Wewakazole B through an efficient solution-phase approach. The key steps of the synthesis are the macrocyclic lactamization of linear dodecapeptide and construction of two hexapeptides with three different substituted oxazole rings.     

Scanning tunneling microscopy study of growth of Pt nanoclusters on thin film Al2O3/NiAl(1 0 0)

The growth of Pt nanoclusters on thin film Al₂O₃ grown on NiAl(1 0 0) was studied by using scanning tunneling microscopy (STM). The samples were prepared by vapor depositing various amounts of Pt onto the Al₂O₃/NiAl(1 0 0) at different substrate temperatures in ultra high vacuum (UHV). The STM images show that sizeable Pt nanoclusters grow solely on crystalline Al₂O₃ surface. These Pt clusters appear to be randomly distributed and only a few form evident alignment patterns, contrasting with Co clusters that are highly aligned on the crystalline Al₂O₃. The size distributions of these Pt clusters are rather broader than those of the Co clusters on the same surface and the sizes are evidently smaller. With increasing coverage or deposition temperature, the number of larger clusters is enhanced, while the size of the majority number of the clusters remains around the same (0.4 nm as height and 2.25 nm as diameter), which differs drastically from the Pt clusters on γ-Al₂O₃/NiAl(1 1 0) observed earlier. These Pt cluster growth features are mostly attributed to smaller diffusion length and ease to form stable nucleus, arising from strong Pt-Pt and Pt-oxide interactions and the peculiar protrusion structures on the ordered Al₂O₃/NiAl(1 0 0). The thermal stability of Pt nanoclusters was also examined. The cluster density decreased monotonically with annealing temperature up to 1000 K at the expense of smaller clusters but coalescence is not observed.     

Structures of Co and Pt nanoclusters on a thin film of Al2O3/NiAl(1 0 0) from reflection high-energy electron diffraction and scanning-tunnelling microscopy

With reflection high-energy electron diffraction (RHEED) and scanning-tunnelling microscopy (STM), we made measurements on Co and Pt nanoclusters grown by vapour deposition on a thin film of Al₂O₃/NiAl(1 0 0). The results show that the annealed Co nanoclusters (with mean diameters 2.5, 3.4, 5.8 nm and heights 0.7, 1.5, 1.5 nm, respectively) and Pt nanoclusters (with mean diameter 2.25 nm and height 0.4 nm) are highly crystalline and that their structures are significantly affected by the oxide substrate. Structural analysis based on the RHEED patterns indicates that both Co and Pt clusters have a fcc phase and grow with their (0 0 1) facets parallel to the θ-Al₂O₃(1 0 0) surfaces, and with their [1 1 0] and [−1 1 0] axes along the [0 1 0] and [0 0 1] directions of the oxide surface, respectively, so (Co(0 0 1)[1 1 0]∥Al₂O₃(1 0 0)[0 1 0] and Pt(0 0 1)[1 1 0]∥Al₂O₃(1 0 0)[0 1 0]). This growth is optimal as the Co and Pt fcc (0 0 1) facets match well with the oxygen mesh. To minimize the lattice mismatch, the lattice parameter of the Co clusters expands 4-5% relative to fcc Co bulk, whereas the lattice parameter of the Pt clusters remains near the bulk value, as the Pt fcc (0 0 1) plane has a close lattice match with the oxide surface.     

Room temperature chemical synthesis of lead selenide thin films with preferred orientation

Room temperature chemical synthesis of PbSe thin films was carried out from aqueous ammoniacal solution using Pb(CH₃COO)₂ as Pb²⁺ and Na₂SeSO₃ as Se²⁻ ion sources. The films were characterized by a various techniques including, X-ray diffraction (XRD), energy dispersive X-ray analysis (EDAX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM), selected area electron diffraction (SAED), Fast Fourier transform (FFT) and UV-vis-NIR techniques. The study revealed that the PbSe thin film consists of preferentially oriented nanocubes with energy band gap of 0.5 eV.