Surface Modification of Poly-ε-Caprolactone with an Atmospheric Pressure Plasma Jet

In this work, poly-ε-caprolactone samples are modified by an atmospheric pressure plasma jet in pure argon and argon/water vapour mixtures. In a first part of the paper, the chemical species present in the plasma jet are identified by optical emission spectroscopy and it was found that plasmas generated in argon/0.05 % water vapour mixtures show the highest emission intensity of OH (A–X) at 308 nm. In a subsequent section, plasma jet surface treatments in argon and argon/water vapour mixtures have been investigated using contact angle measurements and X-ray photoelectron spectroscopy. The polymer samples modified with the plasma jet show a significant decrease in water contact angle due to the incorporation of oxygen-containing groups, such as C–O, C=O and O–C=O. The most efficient oxygen inclusion was however found when 0.05 % of water vapour is added to the argon feeding gas, which correlates with the highest intensity of OH (X) radicals. By optimizing the OH (X) radical yield in the plasma jet, the highest polymer modification efficiency can thus be obtained.     

Surface modification of polypropylene with an atmospheric pressure plasma jet sustained in argon and an argon/water vapour mixture

In this paper, an atmospheric pressure plasma jet sustained in pure argon and an argon/water vapour mixture has been used to modify the surface of polypropylene (PP) films. The gas temperature of the plasma jet was found to be 625 K in an active zone between the electrodes and was found to increase in the afterglow. Based on these results, the PP films are placed as close as possible to the edge of the capillary in order to avoid thermal damage to the polymer. XPS results on the untreated and modified PP samples revealed incorporation of a significant amount of oxygen on the polymer surface, however, this oxygen inclusion is more pronounced for the argon/water vapour jet due to the higher radicals density in the jet afterglow. One can therefore conclude that adding water vapour to an argon plasma jet can be a convenient way to increase the efficiency of plasma surface modification.     

Biosynthesis of cerium oxide nanoparticles and its cytotoxicity survey against colon cancer cell line

Nanoparticles of cerium oxide (CeO₂-NPs), as a metal oxide of rare earth, have found an important role in improving technologies such as polishing, the degradation of harmful industrial dyes and even the treatment of some diseases. Therefore, the development of quick and inexpensive production methods for CeO₂-NPs is sought by researchers. In the present study, we report the biosynthesis of CeO₂-NPs using aqueous extract of Salvadora persica. Synthesized nanoparticles were investigated through powder X-ray diffraction (PXRD), ultraviolet–visible (UV–vis), Fourier transform infrared, transmission electron microscope (TEM), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray and Raman techniques. The UV–vis result shows an absorption peak at 325 nm, which confirms the formation of CeO₂-NPs. The band-gap of synthesized nanoparticles (4.1 eV) is higher than in its bulk state. PXRD and Raman show a crystalline fluorite cubic structure for synthesized nanoparticles. The morphology of synthesized nanoparticles shows a uniform and almost spherical shape via TEM and FESEM images. The particles size was estimated in the range of 10–15 nm. Cytotoxic activity of synthesized nanoparticles was determined through 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay against a colon (HT-29) cancer cell line. The results did not show any significant cytotoxic effect for synthesized samples even for concentration higher than 800 μg/mL. Hence, CeO₂-NPs were synthesized using a natural source; the procedure was rapid with good productivity and biosynthesized nanoparticles were non-toxic.     

Biosynthesis of silver nanoparticles and their role in photocatalytic degradation of methylene blue dye

Research on Chemical Intermediates - Nowadays, synthesis of nanoparticles, particularly silver nanoparticles (Ag-NPs), has become a research priority due to their wide application in medicine and...     

Synthesis of Fe3O4 nanocrystals using hydrothermal approach

Magnetite (Fe₃O₄) nanocrystals were synthesized using a facile hydrothermal method. FeCl₂, FeCl₃ and NaOH with a molar ratio of 1:2:8 were added into an autoclave and this was followed by heat treatment at elevated temperature (100, 150 and 200 °C). The produced results show that the average crystallite and the physical size of the resulting Fe₃O₄ nanocrystals increased with the hydrothermal temperature. The Fe₃O₄ nanocrystals exhibited superparamagnetic behavior. The saturation magnetization and coercivity of the produced nanocrystals also increased with the hydrothermal temperature.     

二维横观各向同性厚板在空间变化热源及体力作用下的动力学响应

研究热源和体力作用下的横观各向同性厚板的二维问题,板的上表面无应力作用,但有规定的表面温度作用;板的下表面置于刚性基础之上,并处于绝热状态.采用Green和Naghdi提出的广义热弹性理论,通过Laplace和Fourier双重变换,在Laplace-Fourier变换域中,得到位移和温度场的控制方程.数值求解双重变换的逆变换,采用一个基于Fourier级数展开的方法,数值地求解Laplace变换的逆变换.对材料镁(Mg)进行数值计算,并用图形表示其结果.推演出各向同性材料铜(Cu)的数值结果,并用图形与横观各向同性材料镁进行比较.同时研究了体力的影响.     

A graphene oxide facilitated a highly porous and effective antibacterial regenerated cellulose membrane containing stabilized silver nanoparticles

Regenerated nanocomposite cellulose membranes embedded with silver nanoparticles (AgNP) and AgNP-graphene oxide (AgGO) were prepared in this study. The as-synthesized AgNP and AgGO were added respectively to a cellulose solution that was prepared by dissolving cellulose in a precooled NaOH/urea (NU) solvent. The solution mixtures were further regenerated into nanocomposite membranes through coagulation in an acidic solution. UV-Vis and TEM results revealed the improved stability of the AgGO compared to that of the AgNP in NU solutions. As revealed by FESEM, the AgGO nanocomposite membrane possessed a more porous structure than a membrane containing AgNP. Antibacterial tests demonstrated that the cellulose membrane of AgGO inhibited the growth of both Staphylococcus aureus and Escherichia coli more effectively than the AgNP nanocomposite membrane, with a lower concentration of AgGO. This work provides a proven and effective method to prepare novel functional cellulose membranes with antibacterial properties, thus broadening the applications of cellulose.     

Iron Oxide Nanoparticles: Biosynthesis,Magnetic Behavior,Cytotoxic Effect

Iron oxide nanoparticles have attracted much attention because of their superparamagnetic properties and their potential applications in many fields such as magnetic storage devices, catalysis, sensors, superparamagnetic relaxometry (SPMR), and high-sensitivity biomolecule magnetic resonance imaging (MRI) for medical diagnosis and therapeutics. In this study, iron oxide nanoparticles (Fe₂O₃ NPs) have been synthesized using a taranjabin (camelthorn or persian manna) aqueous solution. The synthesized Fe₂O₃ NPs were identified through powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), field energy scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDX), vibrating-sample magnetometer (VSM) and Raman technics. The results show that the nanoparticles have a hexagonal structure with 20 to 60 nm in size. The cytotoxic effect of the synthesized nanoparticles has been tested upon application against lung cancer cell (A549) lines. It was found that there is no cytotoxic activity at lower concentrations of 200 μg/mL. The ability of the synthesized nanoparticles for lead removal in wastewaters was tested. Results show that highest concentration of adsorbent (50 mg/L) has maximum removal efficiency (96.73 %). So, synthesized Fe₂O₃ NPs can be a good candidate to use as heavy metals cleaner from contaminated waters.