Influence of interparticle interactions on the kinetics of self-assembly and mechanical strength of nanoparticulate aggregates

Computer simulations based on Discrete Element Method have been performed in order to investigate the influence of interparticle interactions on the kinetics of self-assembly and the mechanical strength of nanoparticle aggregates.Three different systems have been considered.In the first system the interaction between particles has been simulated using the JKR (Johnson,Kendall and Roberts) contact theory,while in the second and third systems the interaction between particles has been simulated using van der Waals and electrostatic forces respectively.In order to compare the mechanical behaviour of the three systems,the magnitude of the maximum attractive force between particles has been kept the same in all cases.However,the relationship between force and separation distance differs from case to case and thus,the range of the interparticle force.The results clearly indicate that as the range of the interparticle force increases,the self-assembly process is faster and the work required to produce the mechanical failure of the assemblies increases by more than one order of magnitude.     

Electroluminescent zinc(II) bis(8-hydroxyquinoline): structural effects on electronic states and device performance

We present direct evidence for stable oligomers in vacuum-deposited thin films of zinc(II) bis(8-hydroxyquinoline) (Znq(2)). The tetramer [(Znq(2))(4)] is the energetically favored configuration in both the single crystal and the vacuum-deposited thin film. Oligomerization leads to distinct, symmetry-driven differences between the electronic states in Znq(2) and those in the archetypal organic electroluminescent molecule tris(8-hydroxyquinoline) aluminum (Alq(3)). In the case of the Znq(2) tetramer, symmetry leads to an extended network of overlapping pyridyl and phenolato moieties in the solid film. Analysis of the electronic structure of (Znq(2))(4) calculated by ab initio Hartree-Fock (HF) methods reveals a localization and energy shift of high-lying occupied and low-lying unoccupied states on symmetry related ligands located on opposite sides of the supramolecular structure resulting in a dipole moment for (Znq(2))(4) tetramer close to zero. The optimal pi-overlap pathways, altered charge distributions, and extended electronic states of tetrameric Znq(2) may be expected to enable low operating voltage organic light-emitting devices (OLEDs) based on Znq(2). We present preliminary evidence that the operating voltage of (Znq(2))(4)-based OLEDs is indeed lower than that of identical devices made with Alq(3). Strategic substitution of 8-hydroxyquinoline ligands and control of the structural symmetry of the corresponding metal chelates may offer a route to high efficiency and low operating voltage small molecule OLEDs.     

Performance of slotted pores in particle manufacture using rotating membrane emulsification

This paper addresses the use of different slotted pores in rotating membrane emulsification technology.Pores of square and rectangular shapes were studied to understand the effect of aspect ratio (1-3.5) and their orientation on oil droplet formation.Increasing the membrane rotation speed decreased the droplet size,and the oil droplets produced were more uniform using slotted pores as compared to circular geometry.At a given rotation speed,the droplet size was mainly determined by the pore size and the fluid velocity of oil through the pore (pore fluid velocity).The ratio of droplet diameter to the equivalent diameter of the slotted pore increased with the pore fluid velocity.At a given pore fluid velocity and rotation speed,pore orientation significantly influences the droplet formation rate: horizontally disposed pores (with their longer side perpendicular to the membrane axis) generate droplets at double the rate of vertically disposed pores.This work indicates practical benefits in the use of slotted membranes over conventional methods.     

Determination of atrasentan by high performance liquid chromatography with fluorescence detection in human plasma.

Atrasentan is an endothelin antagonist selective for the ET(A) receptor in development at Abbott Laboratories for the treatment of cardiovascular disease and cell proliferation disorders. A simple and sensitive chromatographic method for the determination of atrasentan in human plasma has been developed and validated. The analytical method involves acidification of the plasma samples with 0.3 N HCl prior to extraction with 1:1 (v:v) hexane/tert-butylmethylether. The organic extract was evaporated to dryness, reconstituted with 20:80 (v:v) acetonitrile/0.05 M K(2)HPO(4) and washed with 75:25 (v:v) hexane/tert-butylmethylether. The organic layer was discarded and the aqueous layer was injected into the HPLC. Atrasentan and internal standard (ABT-790) were separated from interference using a 250 x 4.6 mm, 5 microm, 120 A Phenomenex Spherisorb C(8) analytical column with a 50 x 4.6 mm, Alltech Absorbosphere 5 microm CN guard cartridge using a mobile phase consisting of 25:15:5:55 (v:v:v:v) acetonitrile/isopropanol/methanol/0.05 M K(2)HPO(4), pH 7.0, at a flow rate of 1.0 mL/min. Fluorescence detection was achieved using lambda(ex) 278 nm and lambda(em) 322 nm. For a 1.0 mL plasma sample volume, the limit of quantitation was approximately 200 pg/mL. The method was linear from 0.2 to 1300 ng/mL (r(2) = 0.9986). Inter- and intra-day assay RSD (n = 6) were less than 10%. Mean accuracy determinations showed the quality control samples to range between 94 and 99% of the theoretical concentration.     

Predicting thermal conductivity of liquid suspensions of nanoparticles (nanofluids) based on rheology

A methodology is proposed for predicting the effective thermal conductivity of dilute suspensions of nanoparticles (nanofluids) based on rheology.The methodology uses the rheological data to infer microstructures of nanoparticles quantitatively,which is then incorporated into the conventional Hamilton-Crosser equation to predict the effective thermal conductivity of nanofluids.The methodology is experimentally validated using four types of nanofluids made of titania nanoparticles and titanate nanotubes dispersed in water and ethylene glycol.And the modified Hamilton-Crosser equation successfully predicted the effective thermal conductivity of the nanofluids.     

A dibenzofuran-based host material for blue electrophosphorescence

Dibenzofuran (DBF) is converted to a vacuum-sublimable, electron-transporting host material via 2,8-substitution with diphenylphosphine oxide moieties. Close pi-pi stacking and the inductive influence of P=O moieties impart favorable electron-transport properties without lowering the triplet energy. A maximum external quantum efficiency of 10.1% and luminance power efficiency of 25.9 lm/W are realized using this material as the host for the blue-green electrophosphorescent molecule, iridium(III) bis(4,6-(di-fluorophenyl)pyridinato-N,C(2')picolinate (FIrpic).     

Nanoporous metal organic framework materials for hydrogen storage

Hydrogen is expected to play an important role in future transportation as a promising alternative clean energy source to carbon-based fuels.One of the key challenges to commercialize hydrogen energy is to develop appropriate onboard hydrogen storage systems,capable of charging and discharging large quantities of hydrogen with fast enough kinetics to meet commercial requirements.Metal organic framework (MOF) is a new type of inorganic and organic hybrid nanoporous particulate materials.Its diverse networks can enhance hydrogen storage through tuning the structure and property of MOFs.The MOF materials so far developed adsorb hydrogen through weak disperston interactions,which allow significant quantity of hydrogen to be stored at cryogenic temperatures with fast kinetics.Novel MOFs are being developed to strengthen the interactions between hydrogen and MOFs in order to store hydrogen under ambient conditions.This review surveys the development of such candidate materials,their performance and future research needs.     

Effects of systematic methyl substitution of metal (III) tris(n-methyl-8-quinolinolato) chelates on material properties for optimum electroluminescence device performance.

We relate the chemical structure of a series of methyl (Me) substituted group III metal tris(8-quinolinolato) chelates (nMeq(3)M: n = 0, 3, 4, 5; M = Al(3+), Ga(3+)) to their photoluminescence (PL), electroluminescence, and thermal properties. Methylation of the 8-quinolinol ligand at the 3 or 4 position (pyridyl ring) results in a factor of 1.4 and 3.0 enhancement of PL quantum efficiency (phi(PL)), respectively, whereas methylation at the 5 position (phenoxide ring) results in a factor of approximately 3.0 decrease in phi(PL) relative to the unsubstituted analogue. Electroluminescent quantum efficiencies of undoped organic light-emitting devices using the aluminum tris(8-quinolinolato) chelates are 1, 0.45, 1.4, and 0.80% for unsubstituted 5-, 4-, and 3-methyl-8-quinolinol ligands, respectively. Devices made with the latter two ligands have a higher operating voltage to generate the same current density. Similar trends were observed for methylation of gallium tris(8-quinolinolato) chelates. We relate these results to the thermal properties of the compounds measured by simultaneous differential scanning calorimetry and thermal gravimetric analysis. The C-4 methylated derivatives exhibit approximately 60 degrees C lower crystalline melting points than all other derivatives, indicating the weakest cohesive forces between molecules. Unlike Alq(3), both the C-4 and C-5 methylated derivatives show no recrystallization of the glassy state below 500 degrees C and exhibit approximately 20-25 degrees C higher glass transition temperatures. We infer that methylation of the 8-quinolinol ligand reduces intermolecular interactions and consequently impedes charge transport through the film.