Fast exopolysaccharide secretion of Pseudomonas aeruginosa on polar polymer surfaces

The influence of the surface chemical structure and related physicochemical properties on the adhesion of P. aeruginosa has been studied for moderately hydrophobic polymers and for hydrophilic surfaces obtained by O2-plasma treatments and 50 keV Ar+ beam irradiation of poly(hydroxymethylsiloxane) and poly(ethyleneterephthalate). The surface chemical structure has been obtained by X-ray photoelectron spectroscopy, the roughness was measured by atomic force microscopy, and the surface free energy was evaluated from contact angle measurements for all the polymer substrates before and after the irradiation treatments. It is shown that a massive and unusually fast secretion of exopolysaccharides onto highly polar surfaces, corresponding to the formation of complex three-dimensional multilayers (i.e., biofilm-like structures), occurs already after 2 h of incubation. It is suggested that such highly polar surfaces can operate either by promoting, by means of a still unknown biomolecular mechanism, an early gene expression process or by mimicking the P. aeruginosa cellular walls.     

Enhancing Tris(pyrazolyl)borate-Based Models of Cysteine/Cysteamine Dioxygenases through Steric Effects: Increased Reactivities,Full Product Characterization and Hints to Initial Superoxide Formation

The design of biomimetic model complexes for the cysteine dioxygenase (CDO) and cysteamine dioxygenase (ADO) is reported, where the 3-His coordination of the iron ion is simulated by three pyrazole donors of a trispyrazolyl borate ligand (Tp) and protected cysteine and cysteamine represent substrate ligands. It is found that the replacement of phenyl groups—attached at the 3-positions of the pyrazole units in a previous model—by mesityl residues has massive consequences, as the latter arrange to a more spacious reaction pocket. Thus, the reaction with O₂ proceeds much faster and afterwards the first structural characterization of an iron(II) η²-O,O-sulfinate product became possible. If one of the three Tp-mesityl groups is placed in the 5-position, an even larger reaction pocket results, which leads to yet faster rates and accumulation of a reaction intermediate at low temperatures, as shown by UV/Vis and Mössbauer spectroscopy. After comparison with the results of investigations on the cobalt analogues this intermediate is tentatively assigned to an iron(III) superoxide species.     

A new controlled release system of chlorhexidine and chlorhexidine:βcd inclusion compounds based on porous silica

The purpose of this study was to prepare and characterize a controlled release system based on porous silica loaded with chlorhexidine (Cx) and its inclusion compounds in β-cyclodextrin (βcd), and to evaluate its antimicrobial activity. Acetate chlorhexidine (CxA), gluconate chlorhexidine (CxG), βcd:chlorhexidine acetate 2:1 (βcd:CxA) and βcd:chlorhexidine gluconate 2:1 (βcd:CxG) were incorporated into porous silica. Drug loading was characterized by FTIR, powder X-ray diffraction, thermal analysis and BET, and was shown to be in an amorphous state and porous matrix. The kinetics release parameter of the drug was established, which showed that the Cx systems release profile followed zero order release until 400 h and Higuchi model release until 750 h, after the burst effect at the first 8 h. Chlorhexidine therapeutic range was reached near first hour for all systems. The chlorhexidine porous silica system was biologically active against Enterococcus faecalis and Candida albicans in vitro. The systems showed an efficient Cx controlled release modulated by the presence of the β-cyclodextrin and by the porous silica matrices, providing effective antimicrobial activity.     

Pervaporation membrane separation process for enhancing the selectivity of an artificial olfactory system (“electronic nose”)

This study investigates the potential of pervaporation (a selective membrane separation technique) combined with an electronic nose based on metal oxide sensors for analyzing wine model solutions. Choosing a suitable membrane polymer, it is shown that subtle variations in aroma composition can be detected by the metal oxide sensors, even when 12% (v/v) ethanol is present in the original sample. Simulations of the composition of the permeate demonstrate that, despite the low molecular density of the permeate, the respective solute concentrations are sufficiently high to generate a reproducible and significant response from the metal oxide sensors.     

Intermixed terpyridine-functionalized monolayers on gold: nonlinear relationship between terpyridyl density and metal ion coordination properties

Aiming at the functionalization of surfaces with terpyridine anchors for the coordinative deposition of additional layers, mixed self-assembled monolayers (SAMs) were prepared from binary solutions of 12-(2,2':6',2″-terpyridine-4'-yl)dodecane-1-thiol (TDT) and 1-decanethiol (DT). The SAMs and the order of the constituting molecules were analyzed by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), and time-of-flight-secondary ion mass spectrometry (ToF-SIMS). The composition of the (TDT/DT)-SAMs and with it the surface density of terpyridyl groups correlates linearly with the relative concentrations of the two compounds in the solution used for depositing them. In marked contrast, the amount of terpyridine-coordinated Pd(II) ions significantly deviates from this trend with an optimum at a 1:3 ratio of TDT/DT. This indicates a major fraction of the terpyridines in TDT-rich SAMs not to be accessible for Pd(II) ion coordination. In agreement, NEXAFS spectroscopy reveals the alkyl backbones in TDT-rich SAMs not to be ordered, while they are preferentially upright oriented in the optimal 1:3-(TDT/DT)-SAMs. We interpret this in terms of terpyridine backfolding in TDT-rich SAMs, while they are located in accessible positions on top of the SAM in the 1:3-(TDT/DT)-SAM. While the alkyl backbones in the 1:3-(TDT/DT)-SAM are ordered, NEXAFS spectroscopy shows the terpyridyl groups not to have a preferential orientation in this SAM and thus retain enough flexibility to adjust to molecules that are deposited on top of the mixed SAM. In conclusion, the novel SAM does not undergo phase separation and consists predominantly of intermixed phases with adjustable surface density of quite flexible terpyridine anchor groups. The terpyridine-Pd(II) anchors are not only available for a future deposition of the next layer, but the metal ions also represent a sensitive probe for the accessibility of the terpyridyl groups.     

A Biomimetic Nickel Complex with a Reduced CO2 Ligand Generated by Formate Deprotonation and Its Behaviour towards CO2

Reduced CO₂ species are key intermediates in a variety of natural and synthetic processes. In the majority of systems, however, they elude isolation or characterisation owing to high reactivity or limited accessibility (heterogeneous systems), and their formulations thus often remain uncertain or are based on calculations only. We herein report on a Ni?CO₂^2? complex that is unique in many ways. While its structural and electronic features help understand the CO₂‐bound state in Ni,Fe carbon monoxide dehydrogenases, its reactivity sheds light on how CO₂ can be converted into CO/CO₃^2? by nickel complexes. In addition, the complex was generated by a rare example of formate β‐deprotonation, a mechanistic step relevant to the nickel‐catalysed conversion of H_xCO_y^z? at electrodes and formate oxidation in formate dehydrogenases.     

Synthesis of Asymmetrically Substituted Terpyridines by Palladium‐Catalyzed Direct C?H Arylation of Pyridine N‐Oxides

The synthesis of asymmetrically substituted 2,2′:6′,2′′‐terpyridines is reported. First, palladium‐catalyzed C? H arylation of pyridine N‐oxides with substituted bromopyridines gave 2,2′‐bipyridine N‐oxides, which were further arylated in a second step to form 2,2′:6′,2′′‐terpyridine N‐oxides. Yields of up to 77 % were obtained with N‐oxides bearing an electron‐withdrawing ethoxycarbonyl substituent in the 4‐position. Pd(OAc)₂ with either P(tBu)₃ or P(o‐tolyl)₃ was used as the catalyst. Cyclometalated complexes derived from Pd(OAc)₂ and these phosphines were also effective. K₃PO₄ as the base gave better results than K₂CO₃. Subsequent deoxygenation with H₂ and Pd/C as the catalyst gave the asymmetrically substituted 2,2′:6′,2′′‐terpyridines in near quantitative yield. This reaction sequence significantly reduces the number of steps required in comparison with known cross‐coupling methods and therefore allows convenient and scalable access to substituted terpyridines.     

Pyridyl‐Functionalised 3H‐1,2,3,4‐Triazaphospholes: Synthesis,Coordination Chemistry and Photophysical Properties of Low‐Coordinate Phosphorus Compounds

Novel conjugated, pyridyl‐functionalised triazaphospholes with either tBu or SiMe₃ substituents at the 5‐position of the N₃PC heterocycle have been prepared by a [3+2] cycloaddition reaction and compared with structurally related, triazole‐based systems. Photoexcitation of the 2‐pyridyl‐substituted triazaphosphole gives rise to a significant fluorescence emission with a quantum yield of up to 12 %. In contrast, the all‐nitrogen triazole analogue shows no emission at all. DFT calculations indicate that the 2‐pyridyl substituted systems have a more rigid and planar structure than their 3‐ and 4‐pyridyl isomers. Time‐dependent (TD) DFT calculations show that only the 2‐pyridyl‐substituted triazaphosphole exhibits similar planar geometry, with matching conformational arrangements in the lowest energy excited state and the ground state; this helps to explain the enhanced emission intensity. The chelating P,N‐hybrid ligand forms a Re^I complex of the type [(N^N)Re(CO)₃Br] through the coordination of nitrogen atom N² to the metal centre rather than through the phosphorus donor. Both structural and spectroscopic data indicate substantial π‐accepting character of the triazaphosphole, which is again in contrast to that of the all‐nitrogen‐containing triazoles. The synthesis and photophysical properties of a new class of phosphorus‐containing extended π systems are described.     

A Standardized Extract Prepared from Red Orange and Lemon Wastes Blocks High-Fat Diet-Induced Hyperglycemia and Hyperlipidemia in Mice

Citrus fruits are a rich source of high-value bioactive compounds and their consumption has been associated with beneficial effects on human health. Red (blood) oranges (Citrus sinensis L. Osbeck) are particularly rich in anthocyanins (95% of which are represented by cyanidin-3-glucoside and cyanidin-3-6″-malonyl-glucoside), flavanones (hesperidin, narirutin, and didymin), and hydroxycinnamic acids (caffeic acid, coumaric acid, sinapic, and ferulic acid). Lemon fruit (Citrus limon) is also rich in flavanones (eriocitrin, hesperidin, and diosmin) and other polyphenols. All of these compounds are believed to play a very important role as dietary antioxidants due to their ability to scavenge free radicals. A standardized powder extract, red orange and lemon extract (RLE), was obtained by properly mixing anthocyanins and other polyphenols recovered from red orange processing waste with eriocitrin and other flavanones recovered from lemon peel by a patented extraction process. RLE was used for in vivo assays aimed at testing a potential beneficial effect on glucose and lipid metabolism. In vivo experiments performed on male CD1 mice fed with a high-fat diet showed that an 8-week treatment with RLE was able to induce a significant reduction in glucose, cholesterol and triglycerides levels in the blood, with positive effects on regulation of hyperglycemia and lipid metabolism, thus suggesting a potential use of this new phytoextract for nutraceutical purposes.     

The Influence of Alkali Metal Ions on the Stability and Reactivity of Chromium(III) Superoxide Moieties Spanned by Siloxide Ligands

In recent years, it has become clear that the presence of redox-inactive Lewis acidic metal ions can decisively influence the reactivity of metal–dioxygen moieties that are formed in the course of O₂ activation, in molecular complexes, and metalloenzymes. Superoxide species are often formed as the primary intermediates but they are mostly too unstable for a thorough investigation. We report here a series of chromium(III) superoxide complexes [L₂Cr]M₂O₂(THF)_y (L=⁻OSiPh₂OSiPh₂O⁻, M⁺=Li⁺, Na⁺, K⁺ and y=4, 5), which could be accessed, studied spectroscopically and partly crystallized at low temperatures. They only differ in the two incorporated Lewis acidic alkali metal counterions (M⁺) and it could thus be shown that the nature of M⁺ determines considerably its interaction with the superoxide ligand. This interaction, in turn, has a significant influence on the stability and reactivity of these complexes towards substrates with OH groups. Furthermore, we show that stability and reactivity are also highly solvent dependent (THF versus nitriles), as donor solvents coordinate to the alkali metal ions and thus also influence their interaction with the superoxide moiety. Altogether, these results provide a comprehensive and detailed picture concerning the correlation between spectroscopic properties, structure, and behavior of such superoxides, that may be exemplary for other systems.