Ionic Interactions of Calcium Sulfate Dihydrate in Aqueous Sodium Chloride Solutions: Solubilities,Densities, Viscosities,Electrical Conductivities,and Surface Tensions at 35 <Superscript>∘</Superscript>C

The thermodynamic, volumetric, transport, and surface properties, solubilities, densities, viscosities, electrical conductivities, and surface tensions of calcium sulfate dihydrate in aqueous sodium chloride solutions have been measured at 35 C, with a view to determine the ionic interactions that occur in these solutions. The experimental density values have been used to calculate the mean apparent molar volumes of the ternary mixtures. Viscosity values have been analyzed using different empirical equations and the experimental values of the viscosity were combined with conductivity to yield the Walden product. Molar surface energies have been computed using experimental surface tension data. The experimental data have been fitted to polynomial equations by a least-squares analysis to obtain the coefficients and their standard errors. Results have been examined in the light of structure making or structure breaking effects of the various ions present in the solutions.     

PRESSURE-VELOCITY EQUILIBRIUM HYDRODYNAMIC MODELS

This article describes mathematical models for phase separated mixtures of materials that are in pressure and velocity equilibrium but not necessarily temperature equilibrium. General conditions for constitutive models for such mixtures that exhibit a single mixture sound speed are discussed and specific examples are described.     

Nanomaterial-based electrochemical sensing of neurological drugs and neurotransmitters

Microchimica Acta - Nanomaterial-modified detection systems represent a chief driver towards the adoption of electrochemical methods, since nanomaterials enable functional tunability, ability to...     

Correlation between biological activity and energies of electronic transitions in benzodiazepines. Negative ion mass spectrometry and ultraviolet absorption spectroscopy study of some derivatives

A correlation between the energies of electronic singlet transitions in benzodiazepines and their biological activity, which was revealed earlier by means of negative ion mass spectrometry with resonance electron capture, has been verified with a UV absorption spectroscopy investigation. Also, it has been noted that the energies of electronic singlet transitions in benzodiazepines are close in value to the ionization energies of atoms Cs, Rb, K, Na, Li and Tl, the cations of which are known to play an important role in nerve cell excitation processes. Copyright 1999 John Wiley & Sons, Ltd.     

Gas-phase deprotonation of arylalkylamines. A collision-induced dissociation study

The collision-induced dissociation (CID) of deprotonated arylalkylamines of general formula R(1)C(6)H(4)CHR(2)CH(2)NR(3)(2) (where R(1) = H, OH, F or NO(2); R(2) = H or OH; R(3) = H or CH(3)) generated by negative chemical ionization with H(2)O and D(2)O as ionizing reagents, is discussed. The negative chemical ionization mass spectra show that, in the absence of a hydroxy group in the aromatic ring, deprotonation takes place at the benzylic position whereas the proton is lost from the OH group when present. The nitro compound forms only M(-.) ions. The CID spectra of the deprotonated molecules show that fragmentations are strongly dependent on the structural features of the molecules, namely the presence or absence of substituents in the aromatic ring or aliphatic chain. Copyright 1999 John Wiley & Sons, Ltd.     

Potentiometric stripping analysis of methyl and ethyl parathion employing carbon nanoparticles and halloysite nanoclay modified carbon paste electrode

Carbon nanoparticles (CNPs) and halloysite nanoclay (HNC) modified carbon paste electrode (HNC–CNP–CPE) was developed for the determination of methyl parathion (MP) and ethyl parathion (EP). The electrochemical behavior of these molecules was investigated employing cyclic voltammetry (CV), chronocoulometry (CC), electrochemical impedance spectroscopy (EIS) and potentiometric stripping analysis (PSA). After optimization of analytical conditions employing this electrode at pH 5.0 in acetate buffer (0.1 M), the peak currents were found to vary linearly with its concentration in the range of 1.55 × 10⁻⁹ to 3.67 × 10⁻⁶ M and 1.21 × 10⁻⁹ to 4.92 × 10⁻⁶ M for MP and EP, respectively. The detection limits (S/N = 3) of 4.70 × 10⁻¹⁰ M and 3.67 × 10⁻¹⁰ M were obtained for MP and EP, respectively, using PSA. The prepared modified electrode showed several advantages such as simple preparation method, high sensitivity, very low detection limits and excellent reproducibility. The proposed method was employed for the determination of MP and EP in fruits, vegetables, water and soil samples.     

Potentiometric stripping analysis of antimony based on carbon paste electrode modified with hexathia crown ether and rice husk

An electrochemical method based on potentiometric stripping analysis (PSA) employing a hexathia 18C6 (HT18C6) and rice husk (RH) modified carbon paste electrode (HT18C6–RH-CPE) has been proposed for the subnanomolar determination of antimony. The characterization of the electrode surface has been carried out by means of scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy and chronocoulometry. By employing HT18C6–RH-CPE, a 12-fold enhancement in the PSA signal (dt/dE) was observed as compared to plain carbon paste electrode (PCPE). Under the optimized conditions, dt/dE (s V⁻¹) was proportional to the Sb(III) concentration in the range of 1.42 × 10⁻⁸ to 6.89 × 10⁻¹¹ M (r = 0.9944) with the detection limit (S/N = 3) of 2.11 × 10⁻¹¹ M. The practical analytical utilities of the modified electrode were demonstrated by the determination of antimony in pharmaceutical formulations, human hair, sea water, urine and blood serum samples. The prepared modified electrode showed several advantages, such as simple preparation method, high sensitivity, very low detection limit and excellent reproducibility. Moreover, the results obtained for antimony analysis in commercial and real samples using HT18C6–RH-CPE and those obtained by inductively coupled plasma-atomic emission spectrometry (ICP-AES) are in agreement at the 95% confidence level.     

Purification and Characterization of Agarase from Marine Bacteria <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. PS12B and Its Use for Preparing Bioactive Hydrolysate from Agarophyte Red Seaweed <Emphasis Type="Italic">Gracilaria verrucosa</Emphasis>

Acinetobacter strain PS12B was isolated from marine sediment and was found to be a good candidate to degrade agar and produce agarase enzyme. The extracellular agarase enzyme from strain PS12B was purified by ammonium sulfate precipitation followed by DEAE-cellulose ion-exchange chromatography. The specific activity of the crude enzyme which was 1.52 U increased to 45.76 U, after two-stage purification, with an enzyme yield of 9.76%. Purified enzyme had a molecular mass of 24 kDa. The optimum pH and temperature for activity of purified agarase were found to be 8.0 and 40 °C, respectively. The K_m and V_max values for agarase were 4.69 mg/ml and 0.5 μmol/min, respectively. Treatment with EDTA reduced the agarase activity by 58% at 5 mM concentration. The enzyme activity was stimulated by the presence of Fe²⁺, Mn²⁺, and Ca2⁺ ions while reducing reagents (β-mercaptoethanol and dithiothreitol, DTT) enhanced its activity by 30–40%. The purified agarase exhibited tolerance to both detergents and organic solvents. Major hydrolysis products of agar were DP4 and also a mixture of longer oligosaccharides DP6 and DP7. The enzyme hydrolysed seaweed (Gracilaria verrucosa) exhibited strong antioxidant activity in vitro. Successful hydrolysis of seaweed indicates the potential use of the enzyme to produce seaweed hydrolysate having health benefits as well as the industrial application like the production of biofuels.