Zein film as a novel natural biopolymer membrane in electrochemical detections

Permselective modifier films are very important in preparing highly sensitive electrochemical sensors. In this work, for the first time, the behavior of gold and glassy carbon electrodes coated with biocompatible zein film as a permselective membrane for the electrochemical detection of various compounds has been investigated. For this purpose, several electroactive cationic (methylene blue, brilliant green, and thionine) and anionic (potassium ferricyanide, alizarin red S, and riboflavin-5’-phosphate) compounds have been used as model. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) showed that zein membranes prepared from casting solution containing 1% zein in ethanol/water have porous structures with high nanometric roughness. The capacitance values of electrical double layers of electrodes modified with zein film were very high for hydrophilic ions in comparison with hydrophobic ions. Point of zero charge pH (pH_pzc) of zein membrane was 4.8. The results of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) as well as pH_pzc study indicated that zein permselective membrane acts as ion exchanger film for selected cationic compounds with fast electrochemical kinetics responses in aqueous solution (pH=7). This behavior was confirmed by circulating solutions containing model compounds from homemade continuous cell equipped with polyamide membranes modified with zein film.

Graphical Abstract

     

Diagnosis of suspicious breast lesions using an empirical mathematical model for dynamic contrast-enhanced MRI

The purpose of this study was to test whether an empirical mathematical model (EMM) of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) can distinguish between benign and malignant breast lesions. A modified clinical protocol was used to improve the sampling of contrast medium uptake and washout. T(1)-weighted DCE magnetic resonance images were acquired at 1.5 T for 22 patients before and after injection of Gd-DTPA. Contrast medium concentration as a function of time was calculated over a small region of interest containing the most rapidly enhancing pixels. Then the curves were fitted with the EMM, which accurately described contrast agent uptake and washout. Results demonstrate that benign lesions had uptake (P<2.0 x 10(-5)) and washout (P<.01) rates of contrast agent significantly slower than those of malignant lesions. In addition, secondary diagnostic parameters, such as time to peak of enhancement, enhancement slope at the peak and curvature at the peak of enhancement, were derived mathematically from the EMM and expressed in terms of primary parameters. These diagnostic parameters also effectively differentiated benign from malignant lesions (P<.03). Conventional analysis of contrast medium dynamics, using a subjective classification of contrast medium kinetics in lesions as "washout," "plateau" or "persistent" (sensitivity=83%, specificity=50% and diagnostic accuracy=72%), was less effective than the EMM (sensitivity=100%, specificity=83% and diagnostic accuracy=94%) for the separation of benign and malignant lesions. In summary, the present research suggests that the EMM is a promising alternative method for evaluating DCE-MRI data with improved diagnostic accuracy.     

N-Protection of amines using pyridinium 2, 2, 2-trifluoroacetate ionic liquid as an efficient and reusable catalyst

A simple, green, and efficient method for the N-tert-butoxycarbonylation of amines by pyridinium 2,2,2- trifluoroacetate （[Py][OTf]） as an efficient and reusable catalyst is reported. In general, electron donating groups on aryl group give rise to the higher yields than electron withdrawing groups. Clean reaction, short reaction times, high yields, reusability of catalyst, and easy preparation of it are some advantages of this work.     

A Novel and Efficient One‐Pot Synthesis of 2‐Aminopyrimidinones and Their Self‐Assembly

A three‐component reaction of benzaldehyde derivatives, methyl cyanoacetate, and guanidinium carbonate affords 2‐amino‐4‐aryl‐1,6‐dihydro‐6‐oxopyrimidine‐5‐carbonitriles and the four‐component reaction of benzaldehyde derivatives, methyl cyanoacetate, and guanidinium hydrochloride in the presence of piperidine leads to piperidinium salts of pyrimidinones. X‐ray crystallography data confirm self‐assembly and H‐bonding in these compounds.     

Application of a Novel CO2 DC Thermal Plasma Torch Submerged in Aqueous Solution for Treatment of Dissolved Carboxylic Acid

Plasma Chemistry and Plasma Processing - A novel direct current (DC) plasma torch, operating with a gas mixture consisting of carbon dioxide and hydrocarbon (methane), has been adapted and used for...     

One-pot synthesis of functionalized 4-oxo-2-thioxo-1,3-thiazinanes from primary amines,CS2, and itaconic anhydride

An efficient synthesis of 2-(3-alkyl-4-oxo-2- thioxo-1,3-thiazinan-5-yl)acetic acids is described via a three-component reaction between primary amines, CS₂, and itaconic anhydride.     

Voltammetric Determination of Bisphenol A in Water and Juice Using a Lanthanum (III)-Doped Cobalt (II,III) Nanocube Modified Carbon Screen-Printed Electrode

A La³⁺ doped Co₃O₄ nanocube modified graphite screen-printed electrode (La³⁺-doped Co₃O₄ nanocube/SPE) was prepared and utilized for the sensitive voltammetric determination of bisphenol A. In comparison with an unmodified electrode, the presence of the La³⁺ doped Co₃O₄ nanocubes caused a significant enhancement in the peak current. Differential pulse voltammetry (DPV), cyclic voltammetry (CV), and chronoamperometry approaches were utilized as diagnostic methods. The modified SPE was used to determine bisphenol A concentrations in the range from 0.5 to 900.0?μM with a limit of detection equal to 6.1?×?10^?8 M. Real samples were effectively analyzed with the modified electrode.     

Fabrication,characterization, and drug release study of vitamin C–loaded alginate/polyethylene oxide nanofibers for the treatment of a skin disorder

Pigmented purpuric dermatosis (PPD) is a skin disorder mainly seen in the lower limbs. The nanofibrous web has been shown to be an appropriate alternative for the treatment of skin diseases as a drug delivery vehicle. In this study, sodium alginate (SA)/polyethylene oxide (PEO) nanofibers containing vitamin C (VC) were fabricated using both blended electrospinning and core/shell electrospinning. The resultant nanofibers were characterized using Fourier transform infrared spectroscopy and scanning electron microscopy. Enhancing the VC content resulted in increasing the nanofibers diameter. Also, the degradation rate and drug release were investigated. Drug release was evaluated using the in vitro dissolution and permeation method. The degradation rate and the drug release of the core/shell nanofibers were found to be lower than those of the blended nanofibers. The drug release of the extended nanofibers followed a different pattern, indicating that the extension of the nanofibers could be a promising way to control the drug release.     

Synthesis of nano‐sized magnetite mesoporous carbon for removal of Reactive Yellow dye from aqueous solutions

In this study, core‐shell structures of magnetite nanoparticles coated with CMK‐8 ordered mesoporous carbon (Fe₃O₄@SiO₂‐CMK‐8 NPs) have been successfully synthesized for the first time by carbonizing sucrose inside the pores of the Kit‐6 mesoporous silica. The nano‐sized mesoporous particles were characterized by X‐ray diffraction, Fourier transform‐infrared spectroscopy, scanning electron microscope, dynamic light scattering, vibrating‐sample magnetometer, Brunauer–Emmett–Teller (BET) and transmission electron microscopy instruments. The obtained nanocomposite was used for removal of Reactive Yellow 160 (RY 160) dye from aqueous samples. The N₂ adsorption–desorption method (at 77 K) confirmed the mesoporous structure of synthesized Fe₃O₄@SiO₂‐CMK‐8 NPs. Also, the surface area was calculated by the BET method and Langmuir plot as 276.84 m²/g and 352.32 m²/g, respectively. The surface area, volume and pore diameter of synthesized nanoparticles (NPs) were calculated from the pore size distribution curves using the Barrett–Joyner–Halenda formula (BJH). To obtain the optimum experimental variables, the effect of various experimental parameters on the dye removal efficiency was studied using Taguchi orthogonal array experimental design method. According to the experimental results, about 90.0% of RY 160 was removed from aqueous solutions at the adsorbent amount of 0.06 g, pH 3 and ionic strength = 0.05 m during 10 min. The pseudo‐second order kinetic model provided a very good fit for the RY 160 dye removal (R² = 0.999). The Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models were applied to describe the equilibrium isotherms, and the Langmuir isotherm showed the best fit to data with the maximum adsorption capacity of 62.893 mg/g. Furthermore, the Fe₃O₄@SiO₂‐CMK‐8 NPs could be simply recovered by external magnet, and exhibited recyclability and reusability for a subsequent six runs.